• Journal of KIISE:Information Networking
• /
• v.29 no.1
• /
• pp.86-96
• /
• 2002

In video conferencing system using H.263 encoding and decoding time is as important as compression rate is. To reduce encoding time, a number of methods were proposed. We use a method of them that reduces the computational complexity in motion estimation. The complexity is determined by three factors, such as a cost function, a search range parameter, and a motion search algorithm. In fact, it takes a lot of time to encode the video data on account of the cost function factor. That's the reason that we use the factor to reduce encoding time. In this paper, we tried to reduce total encoding time by reducing the number of calling the cost function. In case of a little moving, our algorithm enabled faster motion searching than TSS(Three Step Search) and NTSS(New TSS). Here, we called the algorithm by an ITSS(Improved TSS) that improves a shortcoming of NTSS requiring more checkpoints than TSS. For an experimentation, our algorithm was compared to other algorithms using PSNR, file size and SAD call times.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.15 no.3
• /
• pp.3-12
• /
• 2005

This paper introduces a 3D perceptual model based on JND(Just Noticeable Difference) and proposes a video watermarking scheme which is perceptual approach of adaptive embedding in 3D-DCT domain. Videos are composed of consecutive frames with many similar adjacent frames. If a watermark is embedded in the period of similar frames with little motion, it can be easily noticed by human eyes. Therefore, for the transparency the watermark should be embedded into some places where motions exist and for the robustness its magnitude needs to be adjusted properly. For the transparency and the robustness, watermark based on 3D perceptual model is utilized. That is. the sensitivities from the 3D-DCT quantization are derived based on 3D perceptual model, and the sensitivities of the regions having more local motion than global motion are adjusted. Then the watermark is embedded into visually significant coefficients in proportion to the strength of motion in 3D-DCT domain. Experimental results show that the proposed scheme improves the robustness to MPEG compression and temporal attacks by about $3{\sim}9\%$, compared to the existing 3D-DCT based method. In terms of PSNR, the proposed method is similar to the existing method, but JND guarantees the transparency of watermark.

• Journal of Broadcast Engineering
• /
• v.22 no.6
• /
• pp.829-849
• /
• 2017

Due to the large-scale TV display, the convergence of broadcasting and broadband, and the advancement of signal compression and transmission technology, terrestrial digital broadcasting has evolved into UHD broadcasting capable of providing simultaneous broadcasting of fixed UHD and mobile HD. The Korean standard for terrestrial UHDTV broadcasting is based on ATSC 3.0, the broadcasting standard of North America. The terrestrial UHDTV broadcasting standard chose that as a new AV codec standard, HEVC video codec which can compress with higher efficiency compared to AVC, and MPEG-H 3D audio codec for realistic audio. Also, DASH and MMT are adopted as transmission format instead of MPEG-2 TS to support broadband as well as broadcasting network, and in order to provide 4K UHD/mobile HD service simultaneously ROUTE multiplexing technology is applied. In this paper, we propose an audio/video encoder, which is required to provide HDR/WCG supported high quality video service, 10.2 channel/4 object supporting stereo sound service, fixed UHD and mobile HD simultaneous broadcasting service based on ATSC3.0, also we implemented the ATSC 3.0 LDM system for ROUTE/DASH packager, multiplexing system and physical layer transmission/reception, and verified the service ability by applying it to real time broadcast environment.

• Journal of KIISE:Computer Systems and Theory
• /
• v.33 no.9
• /
• pp.574-584
• /
• 2006

Recently, ISO/IEC 23000 (also known as 'MPEG-A') has proposed a new file format called 'MAF(Multimedia Application File Format)[1]' which provides a capability of integrating/storing the widely-used compression standards for audio and video and the metadata in MPEG-7 form into a single file format. However, it is still very hard to verify the usefulness of MPEG-A in the real applications because there is still no real system that fully implements this standard. In this thesis, a design and implementation of a multimedia retrieval system based on MPEG-A standard on PC and mobile device is presented. Furthermore, an extension of MPEG-A for describing the metadata for video is also proposed. It is selected and defined as a subset of MPEG-7 MDS[4] and TV-anytime[5] for video that is useful and manageable in the mobile environments. In order to design the multimedia retrieval system based on MPEG-A, we define the system requirements in terms of portability, extensibility, compatibility, adaptability, efficiency. Based on these requirements, we design the system which composed of 3 layers: Application Layer, Middleware Layer, Platform Layer. The proposed system consists of two sub-parts, client-part and server-part. The client-part consists of MAF authoring tool, MAP player tool and MAF searching tool which allow users to create, play and search the MAF files, respectively. The server-part is composed of modules to store and manage the MAF files and metadata extracted from MAF files. We show the usefulness of the proposed system by implementing the client system both on MS-Windows platform on desk-top computer and WIPI platform on mobile phone, and validate whether it to satisfy all the system requirements. The proposed system can be used to verify the specification in the MPEG-A, and to proves the usefulness of MPEG-A in the real application.

• Journal of Broadcast Engineering
• /
• v.13 no.2
• /
• pp.200-213
• /
• 2008

H.264| MPEG-4 AVC is a new video codingstandard defined by JVT (Joint Video Team) which consists of ITU-T and ISO/IEC. Many techniques are adopted fur the compression efficiency: Especially, an intra prediction in an inter frame is one example but it leads to excessive amount of encoding time due to the decision of a candidate mode and a RDcost calculation. For this reason, a fast determination of the best intra prediction mode is the main issue for saving the encoding time. In this paper, by using the result of statistical relation between intra $16{\times}16$ and $4{\times}4$ intra predictions, the number of candidate modes for $4{\times}4$ intra prediction is reduced. Firstly, utilizing motion vector obtained after inter prediction, prediction of a block mode for each macroblock is made. If an intra prediction is needed, the correlation table between $16{\times}16$ and $4{\times}4$ intra predicted modes is created using the probability during each I frame-coding process. Secondly, using this result, the candidate modes for a $4{\times}4$ intra prediction that reaches a predefined specific probability value are only considered in the same GOP For the experiments, JM11.0, the reference software of H.264|MPEG-4 AVC is used and the experimental results show that the encoding time could be reduced by 51.24% in maximum with negligible amounts of PSNR drop and bitrate increase.

• International Journal of Automotive Technology
• /
• v.6 no.1
• /
• pp.15-21
• /
• 2005

The purpose of this paper is to experimentally investigate the engine pollutant emissions and combustion characteristics of diesel engine fueled with ethanol-diesel blended fuel (bio-diesohol). The experiments were performed on a single-cylinder DI diesel engine. Two blend fuels were consisted of $15\%$ ethanol, $83.5\%$ diesel and $1.5\%$ solublizer (by volume) were evaluated: one without cetane improver (E15-D) and one with a cetane improver (E15-D+CN improver). The engine performance parameters and emissions including fuel consumption, exhaust temperature, lubricating oil temperature, Bosch smoke number, CO, NOx, and THC were measured, and compared to the baseline diesel fuel. In order to gain insight into the combustion characteristics of bio-diesohol blends, the engine combustion processes for blended fuels and diesel fuel were observed using an Engine Video System (AVL 513). The results showed that the brake specific fuel consumption (BSFC) increased at overall engine operating conditions, but it is worth noting that the brake thermal efficiency (BTE) increased by up to $1-2.3\%$ with two blends when compared to diesel fuel. It is found that the engine fueled with ethanol-diesel blend fuels has higher emissions of THC, lower emissions of CO, NOx, and smoke. And the results also indicated that the cetane improver has positive effects on CO and NOx emissions, but negative effect on THC emission. Based on engine combustion visualization, it is found that ignition delay increased, combustion duration and the luminosity of flame decreased for the diesohol blends. The combustion is improved when the CN improver was added to the blend fuel.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.46 no.3
• /
• pp.89-95
• /
• 2009

H.264/AVC is the state-of-the-art video compression standard which achieves high coding efficiency compared with the previous standards. H.264/AVC adopts zig-zag scanning in order to encode quantized transform coefficients in a block. However, its performance is not satisfactory because all blocks are scanned in the fixed order without considering the characteristics of blocks. This paper presents an adaptive coefficient scanning method for improving inter coding efficiency in H.264/AVC. In the proposed method, the coefficient scanning order for each prediction mode is adaptively controlled based on the information of previously-coded blocks. The experimental results show that the proposed coefficient scanning method improves the coding efficiency about 2.29% for high-quality HD sequences.

• Journal of Broadcast Engineering
• /
• v.2 no.2
• /
• pp.169-181
• /
• 1997

In this paper, we propose and discuss about image enhancement techniques for MPEG-4. which represents very low bit-rate, content-based. and object-based hierarchical audio-visual coding standard. The proposed enhancement technique removes undesired artifacts arising in the compression procedure and increase resolution in both spatial and temporal domains. In order to remove undesired artifacts. we divide the MPEG-4 video algorithm in two parts: MPEG-2 like part and the new part. For removing artifacts caused by the first part. we adopt the conventional blocking artifacts algorithm developed for MPEG-2. On the other hand for removing artifacts caused by the second part. we provide a new degradation model. and propose the corresponding image restoration method. For increasing resolution of the MPEG-4 images, we propose a general framework of multichannel image interpolation process. which includes both spatial and temporal interpolations. As the MPEG-4 standard is under development. various sophisticated techniques are considered. but research on image enhancement techniques is relatively underestimated. By this reason. additional image enhancement techniques will become very important issue in realization phase of MPEG-4.

• Journal of Korea Multimedia Society
• /
• v.11 no.2
• /
• pp.163-174
• /
• 2008

The H.264/AVC provides gains in compression efficiency of up to 50% over a wide range of bit rates and video resolutions compared to previous standards. However, to achieve such high coding efficiency, the complexity of H.264/AVC encoder is also increased drastically than previous ones, mainly because of mode decision. In this paper, we propose a three-step mode decision algorithm for fast encoding in H.264/AVC. In the first step, we select skip mode or inter mode by considering the temporal correlation and spatial correlation. In the second step, if the result of the first step is INTER mode, we select one group between two groups for final mode. In the third step, we select final mode by exploiting the pixel values of error macroblock or the modes of adjacent macroblocks. Simulations show that the proposed method reduces the encoding time by 42% on average without any significant PSNR losses.

• Journal of the Institute of Electronics Engineers of Korea TE
• /
• v.39 no.3
• /
• pp.21-27
• /
• 2002

The digital watermarking methods have been proposed as a solution for solving the illegal copying and proof of ownership problems in the context of multimedia data. But it is still difficult to have been overcame the problem of the protection of property to multimedia data, such as digital images, digital video, and digital audio. This paper describes a watermarking algorithm that embeds non-linearly audio logo watermark data which is converted from audio signal of the ownership in the components of pixel intensities in an original image and that insists of ownership by hearing the audio signal transformed from the extracted audio logo through the speaker. Experimental results show that our algorithm using audio logo proposed in this paper is robust against attacks such as particularly lossy JPEG image compression.