• Proceedings of the KIEE Conference
• /
• 2003.07b
• /
• pp.942-944
• /
• 2003

Detent force produced in permanent linear machines generally causes an undesired effect that contributes to the output ripple of machine, vibration and noise. This paper analyzes detent force and thrust in Permanent Magnet Linear Synchronous Motor(PMLSM) by using various detent force minimization techniques. A two dimensional Finite Element Analysis(FEA) is used to Predict detent force and thrust due to structural factors and non-linearity.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2014.11a
• /
• pp.1203-1204
• /
• 2014

세탁기에서 등속 원운동(uniform circular motion)시 발생하는 힘으로 인해 생기는 소음 및 진동을 트라이포드 수평계(tripod water level)의 자동 수평맞춤 센서 장치, 방진고무(vibration proof rubber)를 장착한 최적의 진동흡수 평판 기구를 설계 하고자 한다. 본 연구의 결과는 세탁기 소음으로 인한 층간소음 문제 해결에 기여 할 것이다.

• Proceedings of the KIEE Conference
• /
• 2004.11c
• /
• pp.22-24
• /
• 2004

This paper proposes a printing quality inspection system of film-type envelopment. Since the printing system is running at very high-speed (140m/min.) and the line error has very narrow width, we have to choose one-dimensional high-speed and high-resolution line scan camera. The vibration of the printing machine and the illumination environment make the inspection problem more harder. To obtain reliable inspection results, many software image processing techniques are applied and many parameters are tuned. The performance of the proposed system is proved by many simulations and long time real-plant experiments.

• 제어로봇시스템학회:학술대회논문집
• /
• 2002.10a
• /
• pp.91.3-91
• /
• 2002

This paper describes a design of an induction motor control system for industrial sewing machines. On the basis of vector control principle, the control system is simulated by using the ACSL, implemented on a DSP(TMS320C31).A space vector modulation is used as the inverter switching strategy. For the application of industrial sewing machines, A fast acceleration (deceleration) and removal of velocity ripples are required, because a sewing quality and sewing machines life time depends on these characteristics. The designed control system has fast dynamic characteristics and small speed vibration. The result is applied to the industrial sewing machine and result are shown.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.11 no.5
• /
• pp.53-57
• /
• 2002

The chatter to raise grinding operating is reduce the precision and the quality. In this study, In reply to AE signal and the normal force generated in the grinding operating were measured (1) the amplitude in the mathematical model of the normal force is the form as to transform an exponential (2) the chatter growth is minus point of an exponent. (3) From the observed wheel aspect after the chatter growth, it was to investigated the concern of the chatter growth and the wheel life.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2000.11a
• /
• pp.68-71
• /
• 2000

A tool holder system has been designed to measure cutting forces in diamond turning. This system includes a 3-component piezo-electric tranducer. In this research, tool holder system is modeled by considering the element dividing, material properties, and boundary conditions using MSC/PATRAN. Mode and frequency analysis of structure is simulated by MSC/NASTRAN, for the purpose of developing the effective design. In addition, tool holder system is verified by vibration test using accelerometer. This system will aid to the development of Fast Tool Servo.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 1998.03a
• /
• pp.117-122
• /
• 1998

The misalignment state causes some problems in operating. These problems such as vibration, noise, make the reduce wear, as well as, a stress concentration on the coupling which is the very weakness point at the morter. In order to align the shaft, the dialgage method has used as a means of solution until now. The method using a dialgage require a great deal of labour and money due to making by hand, the accurate alignment is not up to the expectation. For aligning the shaft, all the rotor must come to accord. Also, the dialgage method cannot be compared with straingage measurement method, from the viewpoint, which can gage in short time.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 1998.03a
• /
• pp.214-220
• /
• 1998

The determination of sound pressure radiated from periodic plate structures is fundamental in the estimation of noise levels in aircraft fuselages and ship hull structures. As a robust approach to this problem, here a very general and comprehensive analytical model for prediction the sound radiated by a vibration plate stiffened by periodically spaced orthogonal symmetric beams subjected to a sinusoidally time varying point load is developed. The plate is assumed to be infinite in extent, and the beams are considered to exert both line force and moment reactions on it. Structural damping is included in both plate and beam materials. From this theoretical model, the sound pressure levels on axis in a semi-infinite fluid(water) bounded by the plate with the variation in the loactions of an external using three numerical tools such as the Gauss-Jordan method, the LU decomposition method and the IMSL numerical package.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 1999.10a
• /
• pp.105-110
• /
• 1999

This paper presents a local obstacle avoidance method for indoor mobile robots using Lane method and velocity Space Command approach. The method locates local obstacles using the information form multi-sensors, such that ultrasonic sensor array and laser scanning sensor. The method uses lane method to determine optimum collision-free heading direction of a robot. Also, it deals with the robot motion dynamics problem to reduce some vibration and guarantee fast movement as well. It yields translational and rotational velocities required to avoid the detected obstacles and to keep the robot heading direction toward goal location as close as possible. For experimental verification of the method, a mobile robot driven by two AC servo motors, equipped with 24 ultrasonic sensor array and laser scanning sensor navigates using the method through a corridor cluttered with obstacle.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2000.04a
• /
• pp.321-325
• /
• 2000

To obtain precise surface and high productivity, high speed end milling has been studied recently. Though high speed end milling is explicitly effective for precision surface generation geometrically, tool deflection, chatter vibration and frequency characteristics of end milling system deteriorate the theoretical surface. In this study, simulation algorithm and programming method are suggested to simulate machined surface using acceleration signal in high speed end milling. This simulation is conducted by considering vibrational effect of spindle system which was not considered by other researchers. Between simulated results and experiment results, good agreements were obtained.