• Journal of the Korean Magnetics Society
• /
• v.19 no.6
• /
• pp.203-208
• /
• 2009

Magnetic and Ka-band absorbing properties have been investigated in Ti-Co substituted M-type barium hexaferrites with $BaTi_{0.5}Co_{0.5}Fe_{11}O_{19}$ composition. The ferrite powders were prepared by conventional ceramic processing technique and used as absorbent fillers in ferrite-rubber composites. The magnetic properties were measured by vibrating sample magnetometer. The complex permeability and dielectric constant were measured by using the WR-28 rectangular waveguide and network analyzer in the frequency range 26.5~40 GHz. For the Ti-Co substituted M-hexaferrites, the ferromagnetic resonance is observed at Ka-band (29.4 GHz). The matching frequency and matching thickness are determined by using the solution map of impedance matching. A wide band microwave absorbance is predicted with controlled ferrite volume fraction and absorber thickness.

• Journal of rehabilitation welfare engineering & assistive technology
• /
• v.11 no.2
• /
• pp.147-156
• /
• 2017

The white cane, walking assistive device of visually impaired person, has disadvantages for acquiring the information by contacting obstacles directly and detecting low obstacle on the ground. Recently, new devices have been developing to solve these problems, but these were not widely used due to high price and appearance. Therefore, in this study, we developed two types of walking assistive shoes which were manufactured with infrared sensors, pressure sensors and vibrating motors. Two types of shoes were classified with single sensor (SS) and double sensor (DS) type according to the number of infrared sensor. To evaluate the effectiveness, we compared required time and number of collisions during walking with walking assistive shoes and white cane on obstacle area. As the results, required time was increased than white cane while number of collisions was decreased when walking with developed walking assistive shoes. In addition, required time and number of collisions was more reduced when using walking assistive device than white cane. Therefore, we suggests that developed walking assistive shoes can a great help to provide safe walking condition and reducing time to adapt new types of walking assistive shoes.

• Journal of the Korean Magnetics Society
• /
• v.16 no.1
• /
• pp.45-50
• /
• 2006

Oxygen-deficient anatase and rutile titanium dioxide $(TiO_{2-\delta})$ thin films were prepared by a sol-gel method and their structural, electronic, and magnetic properties were investigated. Both anatase and rutile $TiO_{2-\delta}:Fe$ Fe films exhibited ferromagnetism at room temperature for a limited range of Fe doping. For the same amount of Fe doping, the anatase sample exhibited a higher magnetic moment than the rutile one. Result of conversion electron Mossbauer spectroscopy measurements indicates that $Fe^{3+}$ ions substituting the octahedral $Ti^{4+}$ sites mainly contribute to the room-temperature ferromagnetism. Some of the anatase $TiO_{2-\delta}:Fe$ films exhibited p-type character but the observed feromagnetism turns out to be independent of the hole concentration. The room-temperature ferromagnetism can be explained in terms of a direct ferromagnetic coupling between two neighboring $Fe^{3+}$ ions via an electron trapped in oxygen vacancy in $TiO_{2-\delta}:Fe$.

• Journal of the Korean Magnetics Society
• /
• v.10 no.5
• /
• pp.220-224
• /
• 2000

Ultra-fine $Co_{1+x}$F $e_{2-}$2x/ $Ti_{x}$ $O_4$ferrite powders have been prepared by the sol-gel method. The crystallographic and magnetic properties of the sample have been investigated by means of x-ray diffraction, Mossbauer spetroscopy and vibrating sample magnetometry. The formation of nano crystallized particles is confirmed. The x-ray diffractions of all samples with various compositions clearly indicate the presence of spinel structure. The Mossbauer spectra could be fitted as the superposition of two sextets due to F $e^{3+}$ A-site and B-site. The IS and QS values nearly constant with substituted Co-Ti contents, whereas $H_{hf}$ of B-site decreases with increasing Co-Ti substitution in $Co_{1+x}$F $e_{2-}$2x/ $Ti_{x}$ $O_4$. The magnetic behaviour of powders shows that the saturation magnetization and the coercivity decrease with increasing x in $Co_{1+x}$F $e_{2-}$2x/ $Ti_{x}$ $O_4$.$.X>.

• Journal of the Korean Magnetics Society
• /
• v.7 no.4
• /
• pp.191-195
• /
• 1997

$Co_{84}Hf_{16}$ (1300$\AA$, 2150$\AA$) thin films were prepared by dc magnetron sputtering method. To investigate the uniaxial anisotrpy of the sample, the saturation and effective magnetization of the thin films were measured by VSM and FMR, respectively. The spectroscopic splitting g factor were estimated from the ferromagnetic resonance curves. For 1300$\AA$, 2150$\AA$, the effective magnetization was measured at the temperatures from T=77K to T=300K. The results were analyzed in terms of Bloch's law $M_s(T)=M_s(0)(1BT^{3/2}CT^{5/2}$. The Bloch coefficient B and C were determined by fitting. $M_{eff}(0)$ was obtained by extrapolating $M_{eff}$ to 0 K. From this result, the spinwave stiffness constants D was also determined and the exchange stiffness constants $A_{eff}$ were calculated by Kittel's resonance conditions.

• Journal of the Korean Magnetics Society
• /
• v.13 no.6
• /
• pp.231-236
• /
• 2003

The $Al_{0.2}$CoF $e_{1.8}$ $O_4$ferrite powders have been prepared by the sol-gel method. The crystallographic and magnetic properties of the sample depending on annealing temperature have been investigated by means of x-ray diffraction, FE SEM, Mossbauer spetroscopy and vibrating sample magnetometry. The x-ray diffractions of all samples annealing temperature above 873 K clearly indicate the presence of spinel structure, the lattice constant decrease from 8.425 $\AA$ at 873 K to 8.321 $\AA$ at 1073 K, whereas the particle size rapidly increase from about 39 nm at 673 K to about 108 nm at 1073 K. The Mossbauer spectra annealed above 873 K could be fitted as the superposition of two sextets due to F $e^{3+}$ at A-site and B-site. The isomer shift (IS) and quadruple splitting (QS) values nearly constant with annealing temperature, whereas magnetic hyperfine field ( $H_{hf}$) of A-site slowly in crease and that of B-site fastly increases with increasing annealing temperature. The magnetic behaviour of powders shows that the saturation magnetization increase from 0.7 emu/g at 473 K to 72.1 emu/g at 1073 K while the coercivity decrease from 0.951 kOe at 673 K to 0.374 kOe at 1073 K with increasing annealing temperature.

• Journal of the Korean Magnetics Society
• /
• v.10 no.5
• /
• pp.225-231
• /
• 2000

The crystallographic and magnetic properties of the sample F $e_{0.8}$ $Co_{0.18}$(BN)$_{0.02}$ synthesized by microwave arc-melting with the maximum power of 3.5 kW have been studied by the methods of an X-ray diffraction and the measurement of the magnetic hysteresis using the vibrating sample magnetometer at room temperature. The samples were prepared in a form of pellet pressed under the pressure of 9,000 N/c $m^2$, rolled coldly, and treated with the different temperatures. The X-ray diffraction pattern of pelleted sample shows that the crystal structure of the sample is bcc as same as that of Fe with a good uniformity. The X-ray diffraction pattern shows that a residual stress, which exists in the sample, is eliminated by final 90$0^{\circ}C$ annealing. As rolling rate and heat treatment temperature increases, the saturation magnetization and the remanence of the samples increase whereas the coercivity of the samples shows decrease. Also the saturation magnetization and the remanence of the samples were affected by rolling rate and rolling direction than heat treatment temperature, but the coercivity of the samples was affected by rolling rate and direction as well as heat treatment temperature. This means that a domain wall motion is easy due to elimination of a residual stress and an inclusion which exists in the sample by rolling and heat treatment and a local induced-magnetization easy axis was also formed to parallel to the rolling direction due to creation of the like-atom pairs across the slip plane by rolling......

• Journal of the Korean Applied Science and Technology
• /
• v.37 no.3
• /
• pp.516-525
• /
• 2020

The densities of aqueous solutions of the amphiphile 2-(2-hexyloxyethoxy)ethanol (C₆E₂) were measured at 279.15 K and 282.15 K by vibrating-tube densitometry. Then using the density data of the binary C₆E₂ (1)/water(2) system, the excess volumes and partial molar volumes were determined at various compositions. Excess volume V^E exhibits negative deviation for the whole region of composition, which implies relatively stronger attraction between molecules. At the C₆E₂ mole fraction of around 0.45, V^E was at its minimum. Partial molar volume ${\bar{V}}_1$ increases monotonously with the mole fraction x₁(=x) and ${\bar{V}}_2$ decreases with x. Any particular point in ${\bar{V}}_1$ and ${\bar{V}}_2$, which may point to molecular association, was unobserved.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.10 no.1
• /
• pp.17-22
• /
• 2000

A quaternary alloy film of $CoCr_{16.2}Pt_{10.8}Ta_4$was investigated for its magnetic properties and c-axis orientation with and without Ti underlayer. Additional elements such as Ta, Pt have been frequently introduced in CoCr alloy film for perpendicular recording as a means of improving magnetic performance. It has been reported that the addition of Pt and Ta in CoCr increase the coercivity and the magnetic isolation of columnar grains, respectively. However, CoCrPtTa perpendicular magnetic layer should be more increased its perpendicular magnetic anisotropy than at present for the application of ultrahigh recording density. The improvement of underlayers and substrate materials is one of the promised schemes to intensify the perpendicular magnetic anisotropy. In this study, the insertion of Ti underlayer shows the remarkable improvement of c-axis orientation compare with the direct deposition on the bare glass. The mechanism about this effect of Ti underlayer on CoCrPtTa is not to be clarified yet. Meanwhile, it is found that the magnetic domain of CoCrPtTa on 20 nm Ti underlayer has the continuous stripe pattern but the one of CoCrPtTa on 90 nm Ti underlayer shows the discrete mass type from the results of MFM investigation. This phenomenon is to be a distinct evidence that the improvement of perpendicular anisotropy by the adoption of Ti underlayer is originated from the reinforcement of the grain boundary segregation in CoCrPtTa alloy. Moreover, the transition of the M-H hysteresis pattern with the thickness of Ti underlayer indicates that the major contribution of Ti underlayer is not the magnetocrystalline anisotropy but the shape anisotropy due to the formation of uniform columnar grains by the nonmagnetic alloy segregation.

• Journal of the Korean Magnetics Society
• /
• v.8 no.3
• /
• pp.156-160
• /
• 1998

Crystal structures and magneto-optical properties of $(Mn_{0.5-Z}Sb_{0.5+Z})_{100-y}Pt_y$ (0$(Mn_{0.5-Z}Sb_{0.5+Z})_{100-y}Ag_y$ (0$^{\circ}C$ are C1b-type with fcc and NiAs-type with hcp, respectively. The MnSbAg films have a texture which the c-axis orientation is perpendicular to the film plane by annealing at 300 $^{\circ}C$ for less than 3 hours. The perpendicular anisotropy constants of the $Mn_{47.4}Sb_{47.5}Ag_{5.1}$ film annealed at 300 $^{\circ}C$ for 3 hours are $K_1=6.6{\times}10^5 \; erg/cm^3\;and\;K_2=1.9{\times}10^5\; erg/cm^3$. The Kerr rotation angle of MnSbPt films increases but that of MnSbAg film decreases by decreasing incident wavelength within the range of 700$\leq$ λ$\leq$1000 nm. High polar Kerr angles of 1.7$^{\circ}$ (λ =700 nm) and 0.6$^{\circ}$ (λ =1000 nm), 0.2$^{\circ}$ (λ =700 nm) and 0.97$^{\circ}$ (λ =1000 nm) have been obtained from $Mn_{41.1}Sb_{44,9}Pt_{14.0}$ and $Mn_{47.4}Sb_{47.5}Ag_{5.1}$ alloy films, respectively.