• Journal of the Korean Wood Science and Technology
• /
• v.23 no.4
• /
• pp.46-53
• /
• 1995

The anatomy of Korean diffuse-porous woods, 36 families, 75 genera, 145 species, 215 specimens was described and analyzed. Sixteen wood anatomical characters, habit and phenology factors were determined by simple correlation and principal component analysis. Strong positive correlations were found between vessel element length and fiber length, ray width and ray height, simple pits of fiber wall and paratracheal parenchyma distribution. The results of principal component analysis (PCA) disclose the primitive characteristics and the direction of xylem evolution of Korean diffuse-porous woods. The xylem evolution scenario for Korean dicotyledonous woods is considered to be developed in the direction of decreasing trends of vessel frequency, vessel element length, and length/diameter(L/D) ratio of vessel element but increasing trends of vessel diameter, fiber length/vessel element length(F/V) ratio, libriform wood fibers, simple perforation, and homogeneous ray composition. Increase of vessel diameter and decrease of vessel frequency seem to be related to the improvement of conductive efficiency, and increase of the vessel element length and occurrence of scalariform perforation in vessel element may be related to enhanced of conductive safety. Also the libriform wood fibers and ray features appear to have relationship with mechanical support and nutrient metabolism, respectively.

• Journal of the Korean Wood Science and Technology
• /
• v.24 no.1
• /
• pp.1-10
• /
• 1996

The frequency distribution diagrams of Korean diffuse-porous woods, 36 families, 75 genera, 145 species, 215 specimens in relation to habit and phenology were analyzed. As the habit character changes from shrub to tree, such quantitative features as vessel frequency, percentage of solitary vessels, length/diameter(L/D) ratio of vessel element decreased but tangential vessel diameter, fiber length/vessel element length(F/V) ratio increased. Qualitative features such as helical vessel wall thickening, diffuse distribution of longitudinal parenchyma, heterogeneous ray composition decreased, while alternate intervessel pits, libriform wood fiber, simple perforations increase. As the phenology character changes from evergreen to deciduous species, such quantitative features as percentage of solitary vessels, vessel element length and L/D ratio decreased but tangential vessel diameter, F/V ratio increased. Diffuse distribution of longitudinal parenchyma, heterogeneous ray composition, and crystals in qualitative features decreased, while alternate intervessel pits, libriform wood fiber, simple perforation of vessel element, ray width and ray height increased.

• Journal of the Korean Wood Science and Technology
• /
• v.15 no.3
• /
• pp.1-13
• /
• 1987

This study was carried out to investigate the variations of dimension and exterior shape of vessel elements, morphology of spiral thickening and ray-vessel pit in korean diffuse-porous woods (56 species, 18 families), The tangential pore diameter and vessel element length was increased, whereas the pore number per unit area($1mm^2$) was decreased from pith outwards. The tangential pore diameter was decreased but the length of vessel element was not changed from earlywood to latewood within an annual ring. However, the dimensional variations of vessel element was not able to be recognized among relative positions in peripheral variation. The exterior shape of vessel element could be classified into four types; Type 1 is without tail, Type 2 with ligulate tail, Type 3 with broad taper tail and Type 4 with the very short length between perforations. The distribution frequency of Type 2 and 3 was relatively high in comparision with the others. According to the prominence, distribution position and branched shape, the spiral thickenings could be divided into five types. The spiral thickenings occurred 52% in the species observed. Thus it was doubtful to consider the simple presence of spiral thickening as diagnostic index in diffuse-porous woods. The morphology of ray-vessel pit could be grouped as reticulate, scalariform, oval, linear and coalescent type. Most of species examined showed oval and linear type.

• Journal of Plant Biology
• /
• v.28 no.1
• /
• pp.9-20
• /
• 1985

Dimensional variation of secondary xylem elements, such as vessel element and fiber, was investigated in root, stem and branch of Alnus hirsuta and A. firma. It is clear that vessel diameter in the root is the widest, next in the stem, and the least in the branch. Length of vessel element among them becomes, however, larger in following sequence; stem, root, and branch, whereas fiber diameter and length are the widest in the root, the second in the stem, and the least in the branch. The size of secondary xylem element at any one level in tree increases from the center (pith) of the organs through a number of annual rings to the outer.

• Journal of the Korean Wood Science and Technology
• /
• v.44 no.3
• /
• pp.295-301
• /
• 2016

In this study, relationship between seed origin and growth rate of Alnus glutinosa from different seed collection (Yugoslovia, ltaly, United Kingdom, Bulgaria) was investigated with focused on anatomical properties as wood fiber length, vessel element length and diameter. Alnus glutinosa showed diffuse-porous wood with scalariform perforation in alternate pitting. Ray height was 9~11 in tangential section and ray number were 16~26 in cross section. There were no differences on latewood focused on wood fiber length, length and diameter of vessel element, but difference on earlywood. Other than Yugoslavian seed, there was better growth rate with shorter wood fiber and vessel element length on latewood. However, seed from Yugoslovain showed better growth rate with longer wood fiber and vessel element length than other 3 seed orgins.

• Journal of the Korean Wood Science and Technology
• /
• v.43 no.4
• /
• pp.421-428
• /
• 2015

This study was carried out to investigate the relationship between anatomical characteristics and growth rate of Quercus rubra from different origins of seed. Anatomical characteristics showed that all Quercus rubra species were ring-porous woods with 1~3 layers of large pores in earlywood, but the latewood had small pores oriented in radial direction. There were slight differences in libriform fiber length and vessel element diameter in the earlywood among different provenance origins of seeds. In growth rate, the libriform fiber length and vessel element diameter was negative correlation in the earlywood, but not correlative in the latewood, and vessel element length was not correlative in the early and latewood, Volumetric composition of libriform fiber and ray in latewood was higher than those in ear lywood, and a higher composition of vessel element was observed in earlywood. Ray height was the range of from 11 to 15 cells.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2006.05a
• /
• pp.959-963
• /
• 2006

A three-dimensional elastic blood vessel model with internal diameter variation is considered to investigate internal flow characteristics and effects of structural deformation. Also, computational analyses for both the rigid model and the fully-coupled FSI model have been conducted in order to compare the shear stress, pressure distribution, and flow velocity in detail. A 70% narrowing area of asymmetric blood vessel model was especially investigated to show the versatility of fluid-structure interaction phenomenon. The results reveal that effect of fluid-structure interaction is very important to accurately investigate the flow characteristics of the blood vessel.

• Journal of Biomedical Engineering Research
• /
• v.16 no.3
• /
• pp.289-300
• /
• 1995

The conventionally used method requires centerline of vessels to estimate the vessel diameter. Two methods of estimating the centerline of vessels are reported : One is manually observer-defined method. This potentially contributes to inter-and intra-observer variability. And the other is to auto- matically detect the centerline of vessels. But this is very complicated method. In this paper, we propose a new method of estimating vessel diameter using direction codes and position informs:ion without detecting centerline. Since this method detects the vessel boundary and direction code at d same time, it simplifies the procedure and reduces execution time in estimating the vessel diameter. Compared to a method that automatically estimates the vessel diAmeter uslng centerline, our method provides improved accuracy in image with poor contrast, branching or obstructed vessels. Also, this provides a good compression of boundary description, because each direction code element can be coded with 3 bits only, instead of the 4 bytes required for the storage of the coordinates of each border pixel. Our experiments demonstrate the usefulness of the technique using direction code for quantitative analysis of coronary angiography Experimental results Justify the validity of the proposed method.

• Journal of Korean Society of Forest Science
• /
• v.76 no.4
• /
• pp.317-329
• /
• 1987

A comparative anatomy between the secondary xylem in the root and the stem of some Korean Lauraceae, including 6 genera and 7 species, was carried out in this study. The results are as follows; diameter and length of vessel element and fiber are wider and longer in the root than the stem. The angle of end wall of vessel element is more inclined in the root than the stem. Also more number of bar on the perforation plate of vessel element in root wood is found. From the anatomical characters of root and stem wood in some Lauraceous species, it is suggested that the wood of the root is phylogenetically mote primitive than that of the stem, except the diameter of vessel element.

• Journal of the Korean Wood Science and Technology
• /
• v.42 no.2
• /
• pp.138-146
• /
• 2014

Stem and root of Lindera erythrocarpa were described and compared in the wood anatomical aspects. Root wood appeared to differ from stem wood in the qualitative features of growth ring boundary, extraneous materials in vessel element and ray parenchyma cell, outline of ray, and sheath cell. In the quantitative features, there were differences between these two tissues in vessels per square millimeter, tangential diameter of vessel lumina, length of vessel element, and width of ray. These wood anatomical differences between stem above ground and root below ground were thought to be attributed to their different growth environments.