• Journal of the Korean Wood Science and Technology
• /
• v.25 no.3
• /
• pp.43-49
• /
• 1997

The lengths of fibers and vessel elements, vessel diameters, and ray spacings of tension and opposite woods in Quercus mongolica Fischer and their radial variations were examined. Crystallinity indices and crystallites orientations of tension, opposite and lateral woods were also investigated. The lengths of fibers and vessel elements, and ray spacings of tension wood were longer and denser than those of opposite wood, respectively. In the latewood, the vessels of tension wood had a little larger diameters than those of opposite wood. whereas the vessel diameters of earlywood were similar in both woods. With the exception of vessel diameters of earlywood, there were differences between tension and opposite woods in all anatomical characteristics examined. In the radial variation pattern, the fiber lengths of both woods increased markedly to about 15th annual ring and thereafter remained virtually constant. The vessel element lengths of earlywood in tension wood increased to certain annual ring and thereafter were stabilized, but opposite wood had a relatively constant trend from pith to bark. Those of late wood in both woods increased to certain annual ring and thereafter showed constant patterns. Vessel diameters appeared to show similar trend in both woods. Ray spacings decreased to about 15 annual ring and thereafter were stabilized in both woods. In the fine structures, tension wood had higher crystallinity index and better crystallites orientation than opposite and lateral woods.

• Journal of the Korean Wood Science and Technology
• /
• v.48 no.6
• /
• pp.807-819
• /
• 2020

The aim of this study was to investigate the anatomical characteristics of Quercus mongolica infested by oak wilt disease. To analysis the anatomical characteristics of the wood specimens infested by the oak wilt, the anatomical structures of an infected wood, a dead wood, and sound wood were observed at 10-year-old intervals from 10 to 50 annual rings using both an optical and a scanning electron microscope. The fiber length was measured in units of 5 annual rings from the pith, and the diameter of the vessel element and the ratio of the vessel including the tyloses were measured for each 10 annual ring. In the cross section, on the infected and dead wood specimens, mycelium was also observed with the tyloses in the vessel. There was no signification difference between the wood specimens in the fiber length and the vessel diameter of the vessel element. The fiber length was not difference after 20-30 annual rings which is a part of juvenile wood. The average of the vessel ratio including tyloses in the infected wood was the highest. Especially, the ratio of tyloses was the highest 40-50 annual rings in the infected wood and the dead wood. Therefore, the large difference between the infested wood by oak wilt and the sound wood was the ratio of tyloses. This result can be used as a basic data to utilize the infested wood.

• Journal of the Korea Furniture Society
• /
• v.12 no.1
• /
• pp.21-26
• /
• 2001

This study was carried out to get some basic information on mechanical properties of Platanus orientalis L. for the rational utilization of this wood. Relationship of anatomical characteristics with compression strength parallel to grain was analyzed using stepwise regression technique. All possible combination of 8 independent variables were regressed on compression strength parallel to grain. The summarized results in this study were as follows: 1. The compression strength parallel to grain increased with the increase of wood fiber length and wood fiber width. The strength, however, decreased with increase of number of pore per $\textrm{mm}^2$ and tangential diameter of pore. 2. The major factors affecting compression strength parallel to grain in heartwood were length of wood fiber and number of pore $per{\;}{\textrm{mm}^2}$ but width of wood fiber and length of vessel element were the important factors in sapwood.

• Journal of Korean Society of Forest Science
• /
• v.76 no.4
• /
• pp.317-329
• /
• 1987

A comparative anatomy between the secondary xylem in the root and the stem of some Korean Lauraceae, including 6 genera and 7 species, was carried out in this study. The results are as follows; diameter and length of vessel element and fiber are wider and longer in the root than the stem. The angle of end wall of vessel element is more inclined in the root than the stem. Also more number of bar on the perforation plate of vessel element in root wood is found. From the anatomical characters of root and stem wood in some Lauraceous species, it is suggested that the wood of the root is phylogenetically mote primitive than that of the stem, except the diameter of vessel element.

• 보존과학연구
• /
• s.19
• /
• pp.179-191
• /
• 1998

The Dumu of casted iron objects which is the big vessel for the prevention of fire to wood building is conserved in Kyongpok Palace(Dumu sizes：diameter 97cm, height 42cm, thickness 2cm, weight 250kg). The treated objects which some parts were lost, were not corroded, but cracted and broken by an external power, and strongly attached an cement layer on inside surface. First of all cement layer was mechanically removed by pneumatic needle scaler, welded to electric method for broken and cracked pieces, and then the lost sections were restored to use a epoxy resin and glass fiber. In order to prevent a damage during the handling, the restoration section of the inside surface was treated different colour in comparison with original part.

• Journal of the Korean Wood Science and Technology
• /
• v.36 no.4
• /
• pp.11-18
• /
• 2008

Anatomical characteristics of volumetric composition, fiber length, vessel diameter, and crystalline properties of cellulose in kenaf (Hibiscus cannabinus L.) planted in the reclaimed land of Buan-si, Korea were examined to understand the growth characteristics using a light microscopy and an X-ray diffraction method. The samples of kenaf were taken from six positions (3 cm, 35 cm, 70 cm, 105 cm, 280 cm, and 320 cm) of each stem over the growth period (July, August, September, and October) after seeding in the mid-May. In the kenaf stem, phloem constituted 10 to 15 %, xylem 66 to 82%, and pith 7 to 19%. The ray, bast fiber, and remainder comprised 50%, 20%, and 30% of the phloem, respectively. The volume of vessel, ray, and fiber in the xylem was approximately 10, 15, and 75%, respectively. The proportion of cell wall was 30.92% at the base of stem and 46.40% at the top of stem, respectively. The average length of bast fiber and xylem fiber was about 2.8 mm and 0.9 mm, respectively. Radial and tangential diameters of vessel increased with the increase of growth period, while they decreased with increasing the stem height. Relative crystallinity ranged from 70 to 79% in phloem and from 50 to 56% in xylem. Cellulose crystallite width was about 3 nm both in the phloem and xylem. Thus, the volumetric composition and cell dimensions in the phloem and xylem appeared to be varied with the growth period and the stem height.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.41 no.2
• /
• pp.47-54
• /
• 2009

Anatomical characteristics of kenaf were investigated in transverse, radial and tangential direction by optical and scanning electron micrograph. Kenaf was made up of bast fibers, wood fibers, vessels and parenchyma cells. Bast fibers were long slender cells with different types of pits. The shape of wood fibers were in various ways and pointed at the ends. The pits were observed on the surface of bast fibers. Kenafs were diffuse and radial porous. and composed of solitary pores and two or three radial pore multiples. Various types of vessels were observed. The pits showed alternate pitting and larger diameter than other cells. Parenchyma cells were rectangular or square with different shapes of pith parenchyma cells compared to conventional types of parenchyma cells in wood. The number of pith on the surfaces were small.

• Journal of Korea Foresty Energy
• /
• v.20 no.1
• /
• pp.62-72
• /
• 2001

To elucidate the behaviors of alkali swelllng of woods. the dimensional change in cross section of cell elements of four major Korean woods during alkali swelling were examined by an optical microscory, an imaging analysis method and an X-ray diffrartion During alkali swelling, tracheid diameter of Larix kaempferi wood showed greater swelling property than that of Pinus koraiensis wood, and the cell wall swelled highly over 10% sodium hydroxide solution treatment. The radial diameter of vessel elements in earlywood shrunk, but it swelled slightly in tangential direction. When treated with 5% NaOH, the wall thickness of wood fiber increased about three times over the original one. The thickness of cell wall in all elements and the diameter of wood fiber and tracheid showed almost isotropic shrinkage. The diameter of cell elements during the mercerization process decreased, but cell wall thickness Increased. Crystal transformation of cellulose in wood was not occurred by alkali treatments. but relative crystallinity and crystallite width of the woods increased slightly. Consequently, it was demonstrated that the swelling properties of woods were dependant on wood species, cell elements and alkali concentration.

• 한국연소학회:학술대회논문집
• /
• 2005.10a
• /
• pp.110-119
• /
• 2005

The combustion characteristics of binary component single droplets hanging at the tip of a quartz fiber are studied experimentally at different environmental pressures and temperatures under normal gravity. Normal Heptane and Normal Hexadecane are selected as two fuels with high difference in boiling temperatures. A falling electrical furnace in a high pressure vessel has provided high temperature environment. Nitrogen and air have formed the environment to study evaporation and combustion, respectively. The initial diameter of droplet was ranging from 1.1 to 1.3 mm. The evaporation and combustion processes were recorded by a high speed digital camera. Some characteristics of droplet burning under different environment conditions and different droplet composition have been investigated. Microexplosion of droplet take places under atmospheric pressure. Bubble formation and its consequent result, incomplete droplet disintegration which presents in all binary compositions, do not appear at high pressure. The initiation of combustion, always takes place in the bottom of droplet due to buoyancy effect of relatively cold fuel vapor. Also, the burning of binary droplet produces soot when the pressure is high.

• Korean Journal of Pharmacognosy
• /
• v.42 no.3
• /
• pp.209-212
• /
• 2011

Korean folk medicine 'ORiNaMu' has been used mainly to cure toothache and alcoholism. With regard to the botanical origin of 'ORiNaMu', it has been considered to designate the branch of Alnus species (Betulaceae), but there was no pharmacognostical confirmation on it. To clarify the botanical origin of 'ORiNaMu', the anatomical characteristics of the branch of Alnus firma, A. hirsuta, A. japonica and A. maximowiczii were studied. As a result, it was found the morphological criteria for the four Alnus species that could discriminate them the number of cork cell layer, fiber, stone cell and diameter of vessel. According to there criteria, it was clarified that the commercial folk medicine 'ORiNaMu' was the branch of Alnus firma.