• Journal of Advanced Navigation Technology
• /
• v.10 no.4
• /
• pp.371-376
• /
• 2006

The initial radius of sphere decoder has great effect on the bit error rate performance and computational complexity. Until now, it has been determined either by considering the statistical property of channel or by using of MMSE solution. The initial radius obtained by using statistical property of channel includes the lattice point corresponding to the transmit signal vector with very high probability. The method using MMSE solution first calculates out the MMSE solution of the received signal, then maps the hard decision of this solution into the received signal space, and finally the distance between the mapped point and the received signal is selected as the initial radius of the sphere decoding. In this paper, we derive a simple equation for initial radius selection which uses statistical property of channel and compare it with the method using MMSE solution. To compare two methods we define new metric 'Tightness'. Through the simulation, we observe that in low and moderate SNR region, the method using MMSE solution provides more complexity reduction for decoding while in high SNR region, the method using channel statistics is better.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.14 no.4
• /
• pp.939-947
• /
• 2010

The LDPC(Low-Density Parity-Check) code, which is one of the channel encoding methods in IEEE 802.11n wireless LAN standard, has superior error-correcting capabilities. Since the hardware complexity of LDPC decoder is high, it is very important to take into account the trade-offs between hardware complexity and decoding performance. In this paper, the effects of LLR(Log-Likelihood Ratio) approximation on the performance of MSA(Min-Sum Algorithm)-based LDPC decoder are analyzed, and some optimal design conditions are derived. The parity check matrix with block length of 1,944 bits and code rate of 1/2 in IEEE 802.11n WLAN standard is used. In the case of $BER=10^{-3}$, the $E_b/N_o$ difference between LLR bit-widths (6,4) and (7,5) is 0.62 dB, and $E_b/N_o$ difference for iteration cycles 6 and 7 is 0.3 dB. The simulation results show that optimal BER performance can be achieved by LLR bit-width of (7,5) and iteration cycle of 7.

• The Journal of the Korea Contents Association
• /
• v.12 no.4
• /
• pp.10-19
• /
• 2012

Seamless streaming of multimedia content that ensures Quality of Service over heterogeneous networks has been a desire for many multimedia services, for which the multimedia contents should be adapted to usage environments such as network characteristics, terminal capabilities, and user preferences. Scalability in video coding is a good feature to meet the requirement of heterogeneous networks. In this paper, we propose a dynamic adaptation scheme of H.264/AVC SVC bit-stream using the MPEG-21 Digital Item Adaptation (DIA) tool. MPEG-21 DIA framework provides systematic solutions in choosing an adaptation operation to given conditions and supports interoperable video adaptation. The experiment results show that the proposed adaptation scheme provides QoS-enabled delivery and consumption of SVC with time-varying constraints of network, terminal, and user preference, in a robust and efficient way. In particular, the proposed adaptation scheme is proved to work well with very low delay under the condition that the variation rate of the given network bandwidth is upto 62%.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.52 no.1
• /
• pp.17-23
• /
• 2015

In this paper, we propose an efficient joint demodulation and decoding scheme for FTN (Faster than Nyquist) systems. Several previous works have demonstrated that ISI (Inter Symbol Interference) cancellation schemes based on BCJR (Bahl-Cocke-Jelinek-Raviv) algorithm are suitable for FTN systems. Unfortunately, required complexity of the previous ISI cancellation schemes is very high, especially when a multi-level modulation scheme is employed. In this paper, we propose a joint demodulation and decoding scheme for FTN systems with an iteratively decodable channel coding scheme and a multi-level modulation. Compared with the previously proposed schemes, the proposed scheme not only offers reliable performance but also requires relatively low complexity. Also, the proposed scheme can be easily applied to the FTN system with a multi-level modulation with a minor modification.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.44 no.6
• /
• pp.43-50
• /
• 2007

In this paper we propose a method that identifies users at H.264 streaming using watermarking with fingerprints. The watermark can efficiently reduce the potential danger of forgery or alteration. Especially a biometric watermark has various advantages. Among entire biometric characteristics, the fingerprint is the most convenient and economical. In this paper we propose a novel fingerprint-based watermarking technique that can survive under very low bit-rate compression. The proposed algorithm consists of enhancement of a fingerprint image, the watermark generation using the extracted feature coordinates, watermark insertion using discrete wavelet transform, and authentication. The proposed algorithm can achieve robust watermark extraction against 0.264 compressed videos.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.45 no.6
• /
• pp.104-110
• /
• 2008

In this paper, a novel 2-level-search sphere decoding algorithm for multiple-input multiple-output (MIMO) detection and its VLSI implementation are presented. The proposed algorithm extends the search space by concurrently performing symbol detection on 2 level of the tree search. Therefore, the possibility of discarding good candidates can be avoided. Simulation results demonstrate the good performance of the proposed algorithm in terms of bit-error-rate (BER). From the proposed algorithm, an efficient very large scale integration (VLSI) architecture which incorporates low-complexity and fixed throughput features is proposed. The proposed architecture supports many modulation techniques such as BPSK, QPSK, 16-QAM and 64-QAM. The sorting block, which occupies a large portion of hardware utilization, is shared for different operating modes to reduce the area. The proposed hardware implementation results show the improvement in terms of area and BER performance compared with existing architectures.

• Journal of Broadcast Engineering
• /
• v.12 no.5
• /
• pp.491-502
• /
• 2007

In this parer, we propose an efficient intra prediction mode decision scheme in Scalable Video Coding(SVC) which is an emerging video coding standard as an extension of H.264/MPEG-4 AVC(Advanced Video Coding). The proposed method in base on the characteristic of macroblock smoothness follows the statistical analysis of intra prediction mode in an enhancement layer and it decides a candidate intra prediction mode. We also propose an early termination scheme for Intra_BL mode decision where the RD cost value of Intra_BL is utilized. Simulation results show that the proposed method reduces 54.67% of the computation complexity of intra prediction coding, while the degradation in video quality is negligible; for low QP values, the average PSNR loss is very negligible, equivalently the bit rate increases by 0.011%. For high QP values, the average PSNR loss is less than 0.01dB, which equals to 0.249% increase in bitrate.

• Journal of IKEEE
• /
• v.19 no.3
• /
• pp.342-348
• /
• 2015

High speed implementation of digital filters is required in high data rate applications such as hard-wired wide band modem and high resolution video codec. Since the critical path of the digital filter is the MAC (multiplication and accumulation) circuit, the filter coefficient with sparse non-zero bits enables high speed implementation with adders of low hardware cost. Compressive sensing has been reported to be very successful in sparse representation and sparse signal recovery. In this paper a filter design method for digital FIR filters with CSD (canonic signed digit) coefficients using compressive sensing technique is proposed. The sparse non-zero signed bits are selected in the greedy fashion while pruning the mistakenly selected digits. A few design examples show that the proposed method can be utilized for designing sparse CSD coefficient digital FIR filters approximating the desired frequency response.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2002.05a
• /
• pp.602-607
• /
• 2002

In this paper, we proposed an approach to efficiently compress and transmit multiresoltion 3D lariat models for multimedia and very low bit rate applications. A personal facial model is obtained by a 3D laser digitizer, and further re-quantized at several resolutions according to different scope of applications, such as animation, video game, and video conference. By deforming 2D templates to match and re-quantize a 3D digitized facial model, we obtain its compressed model. In the present study, we create hierarchical 2D lariat wireframe templates are adapted according to facial feature points and the proposed piecewise chainlet affined transformation(PACT) method. The 3D digitized model after requantization are reduced significantly without perceptual loss. Moreover the proposed multiresoulation lariat models possessed of hierarchial data structure are apt to be progressively transmitted and displayed across internet.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.22 no.9
• /
• pp.2043-2052
• /
• 1997

The object-oriented coding technique which is one of the coding methods in very low bit rate environment is suitable for videophone image sequence. The selection of source model affect image analysis. In this paper, an image analysis method for the object-oriented coding is presented. The process is composed of changed region detection andmotion estimateion. First, we use the standard deviation of frame difference as thrreshold to extract themoving area. If thesum of gray values in mask is greater than the threshold, the center pixel of the mask is regarded as moving region. After moving is detected in changed region by edge operator, observation point is determined from moving region. The motion is estimated by 6-parameter mapping method with determined observation point. The experimantal resutls show that the proposed method can significantly improve the image quality.