• 복식문화연구
• /
• 제30권5호
• /
• pp.675-688
• /
• 2022

The purpose of this study is to analyze the body type characteristics of tall adult men aged 20 to 69 years to present base material on body dimensions for men's clothing companies. The research method comprised statistical analysis of 3D measurements after selecting items from the 8th Korean human body size survey related to the torso body types of 495 adult men who were at least 178cm tall. As a result, six factors were extracted, and the total explanatory variable of the entire factor was shown to be 80.499%. As a result of cluster analysis using this as an independent variable, three types were derived: Type 1, "a normal body type with an oval cross-sectional shape" (37.6%), with a larger vertical size and an oval chest cross-sectional shape compared to other types; Type 2: a "cylindrical thick body shape" (31.1%), which is the first stage of BMI obesity, with narrow shoulders and a cylindrical shape with a round cross-section; Type 3, "a body shape with broad shoulders and developed chest parts" (31.3%), with a horizontal size similar to Type 2 above the waist, but similar to Type 1 below. The results of this study are expected to be used as a basis for a clothing dimension system and clothing development for tall men reflecting the characteristics of the torso.

• 설비공학논문집
• /
• 제28권7호
• /
• pp.269-274
• /
• 2016

This paper aims to suggest the water curtain installation guideline for prevention of fire spread. The water curtain systems play a role in preventing fire spread which is caused by fire flames and radiation heat release from a fire source. The radiation attenuation ratio is affected by the water droplet size, vertical distance from the nozzle and flow rate. This study suggests the water curtain installation guideline as follows : (1) Investigation of a reference store array (2) Calculation of the number of drencher heads (3) Review of the relationship between droplet size and attenuation factor depending on the height of the drencher head (4) Review of a drencher head array and spray overlapping. The reference traditional market in which a fire compartment is installed using a water curtain can be predicted to have a radiation attenuation ratio of 50%.

• Geomechanics and Engineering
• /
• 제24권6호
• /
• pp.589-597
• /
• 2021

The present study evaluates geocell reinforced slope behavior. A three dimensional analysis is carried out to simulate soil and geocell elastoplastic behavior using the finite difference software FLAC3D. In order to investigate the geocell reinforcement effect, the geocell aperture size, thickness, geocell placement condition and soil compaction had been considered as variable parameters. Moreover, a comparison is evaluated between geocell reinforcing system and conventional planar reinforcement. The obtained results showed that the pocket size, thickness and soil compaction have considerable influence on the geocell reinforcement slope performance. Moreover, it was found that the critical sliding surface was bounded by the first geocell reinforcement and the slope stability increases, by increasing the vertical space between geocell layers. In addition, the comparison between geocell and geogrid reinforcement indicates the efficiency of using cellular honeycomb geosynthetic reinforcement.

• 한국지반환경공학회 논문집
• /
• 제8권3호
• /
• pp.35-40
• /
• 2007

최근에 연약지반개량공사에서 연직배수공법은 가장 많이 사용하는 공법 중 하나이다. 그러나 개량을 위한 배수재의 시공시에 지반 교란이 발생하여 스미어 존이라는 교란영역을 발생시킨다. 이렇게 발생된 스미어 존의 특징은 그 영역내의 투수계수가 감소하여, 설계시 예상한 압밀진행이 원활히 이루어지지 않는 문제점이 발생 된다는 점이다. 스미어 존의 크기는 압밀도에 직접적으로 영향을 미치는 중요한 설계인자이나, 기존에 수행되는 설계에서는 연구에 의해서 제안된 안전측의 값을 일률적으로 적용하여 설계를 수행하고 있다. 그러나 이러한 방법으로 산정된 스미어 존의 크기는 설계 특성상 불확실성에 대한 과대설계로 진행되어 경제적인 측면에서 큰 손실을 가져올 수 있게 된다. 따라서 이번 연구에서는 3차원 수치해석을 수행하여 스미어 존의 크기에 대한 특성을 분석하고 스미어 존 내부의 투수계수 변화를 고려할 수 있는 스미어 존의 환산크기 결정방법을 제안하여 실제 설계에서 투수계수의 변화에 대한 고려가 가능하도록 하였다.

• Ocean and Polar Research
• /
• 제30권4호
• /
• pp.537-543
• /
• 2008

The sediment resuspension and diffusion model is an integral part of a sediment transport and morphologic change model. We examined a vertical one-dimensional sediment resuspension and diffusion model using field data collected at about 10-m depth off the Saemangeun $4^{th}$ dike. The field data include waves, currents and suspended sediment concentration near the bed for about a day in May, 2007. The suspended sediment concentration obtained from the 1D model overestimated the observation about two orders of magnitude with single grain size and multiple grain sizes. The incorporation of the bed armoring effect, which adjusts the amount of suspended sediment with the available bed sediment, improved the agreement between the model and observation within a factor of two.

• 설비공학논문집
• /
• 제14권5호
• /
• pp.391-397
• /
• 2002

Pressure drop were experimentally investigated for ice slurry flowing in the acrylic pipes with inner diameter of 24 mm. Ice slurry was made from 6.5% ethylene glycol-water solution, and the pipes is consisted of horizontal, vertical (upward and downward) and $90^{\circ}$ elbow pipe. The ice Packing factor (IPF) and the flow rate of the experiments were varied from 0 to 30% and from 5 to 70kg/min respectively The measured pressure drop in various pipe positions were compared with those for the solution flow (IPF=0). The pressure drop was larder than that for solution flows as the IPF increased when the flow rate was low or very high. Sharp increases in pressure drop were observed for the cases when IPF is more than 70% in horizontal and vertical pipes, whereas the pressure drop increased with the IPF simultaneously in an elbow pipe.

• 패션비즈니스
• /
• 제12권2호
• /
• pp.87-99
• /
• 2008

This study aims to classify lower trunk body types of Chinese men in their middle age (30s and 40s) and suggest the standard for them to design slacks pattern. Mollison's relation deviations were used to analyze the direct measurement items in this research compared to those of Size Korea 2004. Though Korean middle-aged men were higher in most items than Chinese counterparts, all items except mid-thigh circumference and side hip length were merely within the range of ${\pm}1\sigma$. According to the results of size classification by absolute values, factor analysis extracted to 2 factors(horizontal size of lower body and vertical size of lower body), and cluster analysis brought about 3 types(type1: tall and thin trunk (36.9%), type 2 : normal height and thick trunk(45.5%), and type 3 : short and normal trunk(17.6%) with some significant differences among them. Also, the results of shape classification by index values, they were extracted 4 factors (waist-hip flatness, waist-hip cross section, vertical waist-groin and hip-surface length) by factor analysis and revealed 3 types(type 1: different waist-hip width, thick, long waist, long upper hip, and short hip-surface length(27.8%), type 2 : different waist-hip width, flat, short upper hip, high hip and groin, and average hip-surface length(29.4%), and type 3: small waist-hip width, thick, average upper hip, and short hip-surface length (42.8%)) with significant differences among them by cluster analysis. The results of standard body types by shape-size combination, 19subjects(10.16%) under these values are regarded as standard body types. Significance was not seen in all items in the t-test results between the total group and the standard group. The latter had lower variation coefficients and smaller individual differences than the former. However, in-depth research is required for generalization since this research is limited to a small number of subjects in Ningbo of Zhejiang.

• 한국의류학회지
• /
• 제40권4호
• /
• pp.591-599
• /
• 2016

This study analyzes the somatotype of tall stature Korean women's lower body for proper slack patterns. The study subjects consist of 350 statures over 165cm in 18-59 aged women's of Size Korea 2010. Descriptive statistics, factor analysis, cluster analysis, ANOVA, Duncan test were used for analysis using SPSS 19.0. The result are as follows: Factor 1 was the horizontal dimension of waist and hip, factor 2 was the vertical dimension of lower body, factor 3 was the horizontal dimension of the lower limbs, factor 4 was the crotch length, and factor 5 was the horizontal dimension of hip. The lower body was divided into 3 types based on analysis of the above factors. Type 1 (46.6%) represented stout type with a thick and medium length of crotch and leg. Type 2 (22.7%) represented a curve type from waist to hip with long crotch length, while short and thin leg. Type 3 (30.7%) was referred as slender type, with short crotch length, while long and thin leg.

• 한국의상디자인학회지
• /
• 제21권4호
• /
• pp.165-179
• /
• 2019

This study used 3D body scan data to classify body shapes according to the torso shape of adult males aged 20-75 years. This data will be provided so that the apparel industry can make apparel products corresponding to body characteristics by age. The study used 1,796 adult males between the ages of 20 and 75 and the 3D body shape data of the '5th Research on National Standard Anthropometry'. For data analysis, the program SPSSWIN Ver. 17.0 was used to calculate the mean and frequency allowing for a factor analysis, cluster analysis, analysis of variance, and Duncan test. To classify body shape according to the torso shape of adult males, this study considered nine factors: 'horizontal size of torso,' 'vertical size of body,' 'curve of torso and waist-abdomen flatness ratio,' 'length of torso,' 'shape of neck area,' 'degree of lateral curve,' 'difference between front and back interscye length,' 'shoulder armscye shape,' and 'chest flatness ratio.' Based on the results of the factor analysis, the torso shapes of adult males were classified into five types. Type 1 is "upright body with flat, curvy shape", Type 2 is "curve sway back body type", Type 3 is "flat, abdominally obese body", Type 4 is "obese, crooked body" and Type 5 is "thick sway front body type." named.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2003년도 가을 학술발표회 논문집
• /
• pp.577-580
• /
• 2003

Problem of repairing by boring is that it deteriorates stabelety and durability of structure by permeation of seawater from underneath after damage and repair of reinforcing rod regarding of spot. The purpose of this study is to improve the porblem by using the repair method of general boring to mend the of large mat basis. Direction of thes experiment is to apply the new repair material and the method to control the blazing fire factor caused by the crack from the foundation of large mat and also to estimate it's integrity. New method of construction is method of contruction that do speace scurity in vertical drilling and bottom useing water jet. New material used bantonite and rubberized asphalt. Test result existent repair method of construction large size mat basis perforation is difficult and reinforcing rod can be damaged coule there were a lot of problems with re-water leakage of crack repair region, but overcomes existent short coming by method that apply in this study.