• 대한물리의학회지
• /
• 제8권3호
• /
• pp.337-342
• /
• 2013

PURPOSE: The Unilateral neglect is characterized by difficulty shifting attention to the side of space opposite the brain lesion and frequently reducing use of contralesional extremities. This study was to identify whether the visual deprivation was responsible for head position on unilateral neglect patient after stroke. METHODS: A patient with left middle cerebral artery infarction participated in the study. We assessed neglect using line bisection and star cancellation test. Patient was instructed to maintain correct alignment of trunk and head in a sit position. We evaluated degree of head lateral tilting and rotation. Then, patient was blocked visual input. Also, we evaluated head position in the same way. RESULTS: He scored 3 points in the line bisection test and 9 points star cancellation test. In postural evaluation, he had deviated posture such as lateral head tilting and rotation. After visual cue deprivation, patient showed different head position which was decreased degree of head tilting and rotation. CONCLUSION: For vertical body orientation, it was used multiple sensory references including the vestibular, somatosensory, and visual system. This finding suggested that abnormal posture of neglect patient could be related to the visual input. It has important clinical implications in terms of understanding the neglect.

• 간호행정학회지
• /
• 제6권1호
• /
• pp.123-134
• /
• 2000

This study intended to analyze the effectiveness to obtain by developing the critical pathway presented as the method to improve the quality-betterment and cost effectiveness the through the continuous and consistent patient management for the hysterectomy patient and applying it to the real practice. This study was designed to develop and effect the critical pathway for hysterectomy patients in the way to be possible the intergrated in patient management. It was adopted the process of seven phase to develop a critical pathway. To analyze the application effect of the developed critical pathway, this author offered health care service applying the critical pathway to the hysterectomy patient from July. 20 to Oct. 19. 1999. The study method had been done by investigating the experimental group and control group through the questionnaire on 40 patients who had been inpatient hysterectomy. Dependent variables were measured by modified from satisfaction, and cost and length of hospital stay. The data anlyzed by frequency, x2-test, t-test. The results of this study was as follows; 1. It was decided that the vertical line of the critical pathway was made up of eight items such as monitoring/assessment, treatment, activity, medication, consult. Lab test, diet, patient teaching and horizontal line was 7days from admission to discharge. 2. After the verifying the validity of the expert group about the critical pathway, the horizontal line was amended from hospitalization to five postoperative days and taking their consensus, some contents of the horizontal line was amended and deleted. 3. There was no significant differences in the experimental group and control group in the satisfaction, and significant differences in the cost, the length of hospital stay.

• 패션비즈니스
• /
• 제16권5호
• /
• pp.57-73
• /
• 2012

The main objective of this research was to understand the characteristics of pleats design through the analysis of modern female fashion as they appear in the 'Collections' from '09 A/W to '12 S/S. Data collection of 1027 was done through the review of 'pr$\hat{e}$t-$\grave{a}$-porter Collections' of three cities; Milan, New York, Paris. Along with the qualitative interpretation of pleats design, statistical analysis of frequency and ${\chi}^2$-test were completed for data analysis. The main findings were as follows; 1. The five types of pleats design were founded in the order of accordion, knife, box, inverted, and sunburst pleats. The frequency and ratio of pleats design occurency showed significant difference between collections. 2. There were significant difference between the types of pleats and their line characteristics of thickness, continuity, length, direction. = Thin fabrics with delicate fine folds were mainly appeared in accordion and sunburst pleats. On the other hand, midium thickness fabrics were used for knife, box & inverted pleats, however, the different images were projected according to the width and the number of folds, characteristics of fabrics and textures. = In all the type of pleats but sunburst, continuity line was appeared the most. The discontinuous lines were appeared the most in the layered types and, sometimes, at some construction lines to add some decorative details or design variations. = The long line were the most frequently appeared in long one-pieces or long skirts of knife, accordion, sunburst pleats. While, the shorter lines showed the most frequently in box and inverted pleats, which mainly used for skirts or the lower part of one-piece. = For the line directions, the vertical lines were the most frequently appeared, and followed by mixed and diagonal line. In mixed or diagonal lines, same type of pleat was repeated in one design. For diagonal lines, one direction was mainly used, however, the symmetrical arrangements or repeated diagonal pleats in various directions also used. In mixed lines, the type of one or two diagonal and one vertical line was the most frequently appeared.

• 한국정밀공학회지
• /
• 제23권2호
• /
• pp.104-112
• /
• 2006

The influence of tire belt angle on the Plysteer Residual Aligning Torque(PRAT) and the cornering stiffness by the FEM has been studied. The PRAT is a performance factor of the tire about vehicle pull, and the cornering stiffness has relation to vehicle steering response of outdoor test. To validate FE model for analysis, simulation data for both the static stiffness(vertical, lateral) and the PRAT have been compared with the experimental data. In addition to the characteristics of the PRAT and the cornering stiffness due to the tire belt angle, rolling and cornering contact characteristics have been studied. The tendency of the PRAT and the cornering stiffness due to the belt angle can be used as a guide line for the tire design in relation to vehicle pull and vehicle steering response.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2017년도 제48회 춘계학술대회논문집
• /
• pp.1188-1191
• /
• 2017

추력은 연소기 개발시험 시 연소 성능을 확인하기 위한 매우 중요한 항목이다. 따라서 정확한 추력을 측정하는 것은 매우 중요하다. 정확한 추력을 측정하기 위해 추력측정장치 시스템 특성, 저항 및 선형성 등을 파악하기 위해 단계적으로 교정 시험을 수행하였다. 추력 교정식으로 산출된 추력과 이론 추력과 비교하여 약 6.9%~8.6%의 오차를 확인하였고, 연소기의 정확한 추력을 측정하기 위해서는 추진제 배관이 연결된 상태에서의 교정이 필요함을 확인하였다.

• 디지털콘텐츠학회 논문지
• /
• 제13권2호
• /
• pp.235-245
• /
• 2012

우리는 본 논문에서 사용자 제스처 인터페이스 기반 퀴즈게임 콘텐츠를 제안한다. 우리는 기존의 아날로그 방식으로 수행해 오던 퀴즈게임의 요소들을 파악하여 디지털화함으로써 퀴즈 진행자의 역할을 콘텐츠 프로그램이 담당할 수 있도록 하였다. 우리는 키넥트 카메라를 사용하여 깊이영상을 획득하고 깊이영상에서 사용자 분할, 머리 위치 검출 및 추적, 손 검출 등의 전처리 작업과 손들기, 손 상하이동, 주먹 모양, 패스, 주먹 쥐고 당김 등의 명령형 손 제스처 인식기술을 개발하였다. 특히 우리는 사람이 일상생활에서 물리적인 객체를 조작하는 동작으로 인터페이스를 위한 제스처를 정의함으로써 사용자가 이동, 선택, 확인 등의 추상적인 개념을 인터페이스 과정에서 체감할 수 있도록 디자인하였다. 앞서 발표되었던 선행 작업과 비교할 때, 우리는 승리 팀에 대한 카드보상 절차를 추가하여 콘텐츠의 완성도를 높였으며, 손 상하이동 인식과 주먹 모양 인식 알고리즘 등을 개선하여 문제 보기선택의 성능을 크게 향상시켰고, 체계적인 실험을 통해 만족할 만한 인식 성능을 입증하였다. 구현된 콘텐츠는 실시간 테스트에서 만족스러운 제스처 인식 결과를 보였으며 원활한 퀴즈게임 진행이 가능하였다.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제38권
• /
• pp.18.1-18.9
• /
• 2016

Background: The aim of this study was to examine the relationship between improvements in lip asymmetry at rest and while smiling after orthognathic surgery in patients with skeletal class III malocclusion. Methods: This study included 21 patients with skeletal class III malocclusion and facial asymmetry. We used preoperative and postoperative CT data and photographs to measure the vertical distance of the lips when smiling. The photographs were calibrated based on these distances and the CT image. We compared preoperative and postoperative results with the t test and correlations between measurements at rest and when smiling by regression analyses. Results: There were significant correlations between the postoperative changes in canting of the mouth corners at rest, canting of the canines, canting of the first molars, the slope of the line connecting the canines, and the slope of the line connecting first molars. The magnitude of the postoperative lip line improvement while smiling was not significantly correlated with changes in the canting and slopes of the canines, molars, and lip lines at rest. Conclusions: It remains difficult to predict lip line changes while smiling compared with at rest after orthognathic surgery in patients with mandibular prognathism, accompanied by facial asymmetry.

• 설비공학논문집
• /
• 제26권10호
• /
• pp.453-459
• /
• 2014

This paper presents an analysis on the initial ignoring time of SCW type GHX using Mean Square Error method. Line source method is a useful method for estimating the ground thermal conductivity for the vertical type and SCW type GHX in Korea. The line source method for ground thermal conductivity of geothermal in-site test is the basis of linear approximation between the temperature of a borehole and logarithmic time in a GHX. To apply the line source method to the estimation of SCW type GHX, it is necessary to ignore the initial time of data at the stage of a linear approximation. This paper proposed a new initial ignoring time of SCW type GHX among various initial ignoring time at the time for reaching MSE of $0.02^{\circ}C^2$.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 하계학술대회 논문집 A
• /
• pp.627-629
• /
• 2004

V type suspension string sets prevent instabilities from swing motion by the horizontal angle and by wind pressure. These installation conditions are controled mainly 3 items - normal swing angle by horizontal angle of line, unusual swing angle by strong wind, minimum vertical loads. We calculated and analysed that factors for the 765kV transmission line condition. And we were tested swing characteristics of V-string sets in real size test situation. So, we find to installation condition for the V type suspension string sets. This results will be used to design of V type suspension string set and to decision of the installation condition.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2000년도 춘계학술대회논문집
• /
• pp.1479-1486
• /
• 2000

This paper introduces the improved moving frame acoustic holography (MFAH) method and its application. MFAH allows us to visualize the noise generated by moving noise sources by employing a vertical line array of microphones affixed to the ground. The sound field generated by moving sources is different from that of stationary ones due to the movement of the sources. Therefore the measured sound pressure by the microphone on the ground has to be processed so that it cooperates the effect of the movement. This paper discusses the effect of moving noise sources on the obtained hologram by MFAH. This assures the applicability of MFAH to the visualization of moving sources. This paper also reviews the improved MFAH that can visualize a coherent narrow band noise and a pass-by noise. The practical applicability of the improved MFAH was demonstrated by visualizing tire noise during a pass-by test.