• Journal of the Korean Society of Marine Environment & Safety
• /
• v.18 no.5
• /
• pp.388-397
• /
• 2012

In this study, 3D-NIT(3-Dimensional Numerical Irregular wave Tank) model in which regular wave as well as stable irregular wave can be generated in 3-dimensional numerical irregular wave tank was proposed. To verify validity, the following steps need to be conducted: 1) comparative analysis between calculated waveforms and targeted waveforms at the wave generating point, 2) comparative analysis with the existing experimental values of overtopping volume estimated, targeting shore protection structures installed on a slope bed, 3) comparison with the existing numerical and hydraulic experimental results through application in the analysis on the wave deformation by structures and wave force acting on the vertical cylindrical structures. Based on the results, characteristics of the breaking wave forces according to incident waves and interval distance of structures were identified through application of 3D-NIT model in the analysis on the breaking wave forces acting on the cylindrical structures installed on a slope bed, and reflection and overtopping was reviewed through application in the special breakwaters on the domestic fields. The numerical results obtained the 3D-NIT model are in good agreement with experimental results, and its applicaion to the complex-shpaed coastal structures is verified.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.24 no.3
• /
• pp.189-202
• /
• 2012

An Oscillating Water Column (OWC) wave generation system uses the air flow induced by the vertical motion of water column in the air chamber as a driving force of turbine. It is well known that OWC is one of the most efficient devices to harness wave power. This study estimated the air flow velocity from the time variation of the water level fluctuation in the air chamber under regular wave conditions using 3-dimensional numerical irregular wave tank (3D-NIT) model that can simulate the 3-dimensional irregular wave field. The applicability of the 3D-NIT model was validated by comparing numerically predicted air flow velocities with hydraulic experimental results. In addition, the characteristics of air flow frequency spectrum variation due to the incident frequency spectrum change, and the variations of frequency spectrum and wave reflection due to the existence of converter inside the air chamber were discussed. It is found that the phase difference exists in between the air flow velocity and the water level fluctuation inside the air chamber, and the peak frequency of the spectrum in water level fluctuation is amplified by the resonance in the air chamber.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.51 no.6
• /
• pp.539-543
• /
• 2006

Lodging is classified as root lodging caused by the loss of supporting force in the root, bending caused by the deformation of the stem and breaking where the stem breaks down as loads exceeding critical elasticity were applied. This research excluded breaking which is not in a state of equilibrium and tried to partition the level of lodging using an algebraic model in root lodging and stem lodging, or bending. When a vertical load was applied, the deformation of the stem of rice plant showed the form of a quadratic equation. The trace of the panicle neck in the process of lodging was an ellipse-shape. When loading was pure root lodging, the trace of the panicle neck became a circle of which culm length is the radius. When it was a pure stem lodging, the trace of the panicle neck is an ellipse of which major axis is culm length and minor axis is 0.64* culm length. When both stem lodging and root lodging occurred in a natural setting, the partitioning of lodging can be calculated by a formula using eccentricity of an ellipse, S=e*100/0.768(S is the ratio of stem lodging in the whole lodging, e is eccentricity of the ellipse). This method is expected to be useful in simple lodging partitioning. We could also calculate the partitioning of stem lodging and root lodging as units of angles as an accuracy method, by using a straight line calculated by differentiating a quadratic equation of stem deformation at the origin of the coordinates. These two methods for dividing root and stem lodging showed different values. However, each of them showed almost same values with different lodging degree in one plant.

• Hwankyungkyoyuk
• /
• v.11 no.2
• /
• pp.118-129
• /
• 1998

This survey is made to offer the fundamental data for the establishment of practical environmental education plan based on understanding of the change of the environmental awareness of elementary school students under the longitudinal-sectional research design. In this research, the questionnaire made by Kim Jong-ki in 1988 and by Kim Hak-Bong in 1993, is amended and filled up, which is used to the 624 numbers of fifth and sixth grade students lived in Seoul, Pyungtaek and Yangjugu. This research ares are devided into 5 ares which are the environmental general, environmental pollution, living environment, environmental education and consciouness of environmental crisis to humen beings. First, it is grasped general tendency and then is compared and analyzed the level of awareness by residence, sex, grade. stsdard of living parental academic, the background variation of parental job with the status in 1988 and 1933. The results are as follows: 1) The rate of interest for environmental pollution and population is reduced but the rate of interest for animal protection is increased. 2) In spite of reinforcement of environmental education In school, the numbers of the students who became to know some information about that from the class are diminished. 3) Even if the children are aware of sewage seriousely, the numbers of the students who answer it is caused by domestic sewage are a few. 4) On the environmental education area, the various materials of the are not utilized well in a class. 5) On the environmental crisis to the human beings the rate is much increased in 1993 ttan that of 1988 environmental contamination is the important cause of the human beings' crises but now the rate is reduced again. In other variables except the environmental contamination, it is increased the that of 1993 on the war, on population it is showed a tendency of reduction. The results of this study are as follows : 1) It is supposed that the education should be done only not for the knowledge of environmental education but for the practice of that - animal breeding, field experience of the ecological destruction places. 2) The various environmental education materials such as TV, VTR are demanded to give the students proper information about that and to educate sufficently. 3) The course of fields exploration for environmental education should be prepared under cooperation of the authorities concerned. 4) It has to be groped for an epoch-making teaching method and the training and the practice of teachers in order to reform environmental pollution.

• Journal of Korean Society for Geospatial Information Science
• /
• v.22 no.2
• /
• pp.25-32
• /
• 2014

The river plan executes the role for prevention of disaster and protection of environment, and requires the surveying results with high accuracies for managing river, dam, reservoir which will be the major infrastructures. The purpose of this study is for comparing and analyzing the results of river surveying which is used widely for disaster management and construction industry support. The results are gathered by using LiDAR which is being used in Korea recently and by using Total station. Study area is chosen at upper area of Bukhan River which is located at Gangwon-do. Total 2 cross-sections of the two methods are extracted from the study area. The standard deviation of land part is about 0.017m which shows little difference between two methods, but the Airborne LiDAR results cannot survey the heights of the points accurately at the singular points with vertical structure and water body part. To overcome the problems through this study, there should be ways to survey the bottom river through transmission of water level within the same margin scope as land part and to survey detailed facilities used by laser exactly through continuous research and experiment. When implementation stage comes, this study expect that this document will be utilized variously for making decision in the area of planning and drawing of business and engineering not just for river regarding the major area or the area that people cannot access.

• Journal of Venture Innovation
• /
• v.7 no.1
• /
• pp.167-182
• /
• 2024

The aim of this study is to empirically explore the operational spillover effect among companies within chaebol groups, prominent corporate conglomerates in South Korea. Chaebols are known for their horizontal and vertical integration, fostering close collaboration among their constituent companies from a supply chain standpoint. Existing literature highlights the sharing of tangible and intangible resources within chaebol structures, leading to increased efficiency by minimizing transaction costs through resource sharing. This research investigates whether operational management performance within chaebol structures can be transmitted through cooperative resource utilization. To achieve this objective, we categorize leading companies and affiliate companies within chaebols and examine whether the operational management performance of leading companies significantly influences that of affiliate companies. Data on conglomerates, as defined by the Korea Fair Trade Commission, were collected, along with information on companies within these groups. Subsequently, the company with the highest revenue within each group was identified as the leading company, while the remaining companies were designated as affiliate companies. Our analysis reveals a significant positive relationship between the performance of inventory and facility resource management of leading companies and that of affiliate companies. This study sheds light on the transfer of operational management performance within conglomerates from a managerial perspective, underscoring the importance of reinforcing cooperation systems within the chaebol group. Furthermore, this research contributes to the academic discourse by delineating conglomerates from an operational management perspective and empirically demonstrating the transfer effect of operational management performance.

• Composites Research
• /
• v.37 no.2
• /
• pp.101-107
• /
• 2024

Demand for submarine cable is increasing due to advances in submarine power transmission technology and submarine cable manufacturing technology. Submarine cable use various types of protective equipment to prevent problems such as high maintenance costs in the event of cable damage and power outages during maintenance periods. Among them, flexible protection tube is a representative protective equipment to protect cables and respond to external forces such as waves and current. The flexible protection tube is made of polyurethane 85A hyperelastic material, so the calculation of mechanical behavior is carried out using mechanical properties based on experimental results. In this study, a study was conducted to determine the bending performance and tensile performance of flexible protection tube through analytical methods. The physical properties obtained through the multiaxial tensile test of polyurethane 85A were used for the analysis. Bending and tensile performance were determined for the maximum bending moment standard of 15 kN·m and the tensile load standard of 50 kN. As a result, it was confirmed that when the maximum bending moment of 15 kN·m of the flexible protection tube occurred, the bending performance of the MBR was secured at 13 m and when a tensile load of 50 kN, it was applied the maximum vertical displacement was 968 mm, confirming that the tensile performance was secured.