• 한국방재학회:학술대회논문집
• /
• 2008.02a
• /
• pp.225-228
• /
• 2008

There are many studies about submerged structures or porous wave absorbers to decrease damage of coast and structures. Submerged structures and porous wave absorber are decreasing energy of incoming wave by reflecting or dissipation with changing depth or with porous rubble mound. This study addresses the reflection and transmission of long wave from a trapezoidal breakwater and a vertical porous wave absorber at the same time. A systematic shape transfer is derived to determine wave reflection and transmission. And periodic solutions are matched at the slope and the front face of the absorber by assuming continuity of pressure and mass. The transmission coefficient is determined as a function of parameters describing the incoming waves, transmitting waves through the trapezoidal breakwater and the absorber characteristics.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.3 no.3
• /
• pp.261-268
• /
• 1999

The seismic performance of precast concrete panel structures tested previously has been evaluated in this paper. Hysteretic curves of test specimens are idealized to elasto-plastic curves to get reliable yielding and ultimate displacements. For the idealized curves, ductility and energy dissipation capacity of specimens have been evaluated using a few guide lines. In addition, the strength capacity of specimens is checked for the strength demand caused by the design earthquake load including overturning moment effects. The result shows while the strength of specimen with joint box for vertical continuity is little bit lower than that of specimen connected by welding, the ductility of the former is higher than that of the latter. The energy dissipation ratios of PC specimens are ranged from 83% to 96% of that of Re specimen and the average of those are shown 90%.

• Wind and Structures
• /
• v.17 no.3
• /
• pp.345-359
• /
• 2013

Turkey has been hosted various civilizations throughout centuries and it has become one of the oldest settlements all over the world due to the geographical location. Therefore, it has accommodated innumerable historical structures remain from the past civilizations. Protection and conservation of these historical constructions should be the major points for continuity of history. Crooked minaret is one of between these historical invaluable structures. It is located at the city of Aksaray and it dates back approximately 800 years. The minaret has lost its vertical position in time and bends on the North-West direction. In this study, general information is given about minarets and some restoration recommendations are given for crooked minaret based on performed some finite element structural analyses. These analyses are considered into three cases; 1-Dead loading, 2-Wind loading, and 3-Earthquake loadings. Results from the analyses are discussed detailed and some useful recommendations are given in the end of the study.

• Journal of Advanced Navigation Technology
• /
• v.11 no.4
• /
• pp.371-377
• /
• 2007

Ionospheric time delay is one of the main error source for single-frequency DGPS applications, including time transfer and Wide Area Differential GPS (WADGPS). Grid-based algorithm was already developed for WADGPS but that algorithm is not applicable to geomagnetic storm condition in accuracy and management. In geomagnetic storm condition, the spatial distribution of vertical ionospheric delay is noisy and therefore the accuracy of modeling become low in grid-based algorithm. For better accuracy, function based algorithm can be used but the continuity of correction message is not guranteed. In this paper, we propose the ionospheric model using wavelet based algorithm. This algorithm shows better accuracy with the same number of correction message than the existing spherical harmonics algorithm and guarantees the continuity of correction messages when the number of message is expanded for geomagnetic storm condition.

• Journal of Korean Academy of Oral and Maxillofacial Radiology
• /
• v.29 no.1
• /
• pp.21-32
• /
• 1999

Purpose: To evaluate the effect of variable scanning protocols of computed tomography for evaluation of pre-implant site of the mandible through the comparison of the reformatted cross-sectional images of helical CT scans obtained with various imaging parameters versus those of conventional CT scans. Materials and Methods: A dry mandible was imaged using conventional nonoverlapped CT scans with 1 mm slice thickness and helical CT scans with 1 mm slice thickness and pitches of 1.0, 1.5. 2.0, 2.5 and 3.0. All helical images were reconstructed at reconstruction interval of 1 mm. DentaScan reformatted images were obtained to allow standardized visualization of cross-sectional images of the mandible. The reformatted images were reviewed and measured separately by 4 dental radiologists. The image qualities of continuity of cortical outline. trabecular bone structure and visibility of the mandibular canal were evaluated and the distance between anatomic structures were measured by 4 dental radiologists. Results: On image qualities of continuity of cortical outline. trabecular bone structure and visibility of the mandibular canal and in horizontal measurement. there was no statistically significant difference among conventional and helical scans with pitches of 1.0. 1.5 and 2.0. In vertical measurement. there was no statistically significant difference among the conventional and all imaging parameters of helical CT scans with pitches of 1.0, 1.5, 2.0, 2.5 and 3.0. Conclusion: The images of helical CT scans with 1 mm slice thickness and pitches of 1.0, 1.5 and 2.0 are as good as those of conventional CT scans with 1 mm slice thickness for evaluation of predental implant site of the mandible. Considering the radiation dose and patient comfort, helical CT scans with 1 mm slice thickness and pitch of 2.0 is recommended for evaluation of pre-implant site of the mandible.

• The Journal of the Convergence on Culture Technology
• /
• v.9 no.4
• /
• pp.423-430
• /
• 2023

This dissertation discusses the formulation of a nonlinear storytelling board that preserves the contextual perspective of characters. Storytelling encompasses the director's creative intention by leveraging the interaction of various elements to construct a logical narrative that explores cause and effect. Its primary objective is to enhance viewers' empathy. Consequently, there is a pressing need for comprehensive research on differentiating storytelling from storyboarding. Moreover, the integrated approach to storytelling and storyboarding holds scholarly value in understanding the process of narrative composition and visualization. Thus, a study proposes a method for constructing nonlinear storytelling boards considering the discrete camera perspective and contextual scene continuity, ultimately contributing to visual complexity and correlation comprehension. This approach enables a careful and simultaneous consideration of the correlations that deepen cognition, including the physical, emotional, and event rhythms mentioned in Karen Perlman's theory.

• Journal of Korean Home Economics Education Association
• /
• v.19 no.1 s.43
• /
• pp.1-14
• /
• 2007

This study aimed to analyze the contents of clothing and textile areas in practical arts, technology and home economics, and science of home economics courses, and the degrees of vertical connections among them. Totally 21 textbooks were chosen for this study, which consist of fifth and sixth grade practical arts textbooks(one from each grade), sixteen technology and home economics textbooks(eight from each eighth and tenth grade), and three high school science of home economics textbooks. In order to analyze systematically the degrees of vertical connections, clothing and textile areas were divided into 6 large sections, which were subdivided into 48 specific categories(contents) by content analysis. The method of connection analysis was based on development(constant continuity and sequence), repetition (continuity without considering sequence), gap(sequence without considering the continuity of curriculum), and reduction(the lack of both continuity and sequence). The connection analysis were done in 48 categories separatively. In the sections of clothing attire and clothing management, the most categories(46.1% and 44.5%) were evaluated as having connections of reductions. No category was analyzed as development in the section of clothing planning and the most categories(83.3%) had connections of repetitions. In the clothing material section showed to be the section with the most in-depth and expanded content compared to the previous educational levels, with developed categories of 50%. The most degree of connection in the clothing and textile areas of practical arts, technology and home economics, and science of home economics subjects was the development at 29.2%, followed by repetition at 25%, reduction at 25%, and finally gap at 20.8%. Developed categories were relatively more than repetitive, reduced, or gap contents. However, as the connection between grades was not highly outstanding, it was difficult to say that the connection of the curriculum was adequately distributed according to the school grades.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.14 no.2
• /
• pp.355-365
• /
• 1994

An analytical model of return flow is presented outside the surf zone. The governing equation is derived from the Navier-Stokes equation and the continuity. Each term of the governing equation is evaluated by the ordering analysis. Then the infinitesimal terms, i.e. the turbulent normal stress, the squared vertical velocity of water particle and the streaming velocity, are neglected. The driving forces of return flow are calculated using the linear wave theory for the shallow water approximation. Especially, the space derivative of local wave heights is described considering a shoaling coefficient. The vertical distribution of eddy viscosity is discussed to the customary types which are the constant, the linear function and the exponential function. Each coefficient of the eddy viscosities which sensitively affect the precision of solutions is uniquely decided from the additional boundary condition which the velocity becomes zero at the wave trough level. Also the boundary conditions at the bottom and the continuity relation are used in the integration of the governing equation. The theoretical solutions of present model are compared with the various experimental results. The solutions show a good agreement with the experimental results in the case of constant or exponential function type eddy viscosity.

• Quality Improvement in Health Care
• /
• v.7 no.2
• /
• pp.156-167
• /
• 2000

Background: Emphasis in healthcare during the 1990s has been to provide both optimal wellness and function with quality in a Cost-effective manner. Critical pathway was developed to meet the need to guide clients along the continunm of care and to achieve continuity of care. The purpose of this study is to review and analyze articles related to the critical pathway that had developed and applied in Korea and abroad from 1995 to 1999. Methods: Total 39 studies were analyzed in terms of group of application, need of development, horizontal axis: time frame, vertical axis : items of care, task force team, identification of preliminary critical pathway, validation of preliminary critical pathway, types of final critical pathway, a person who coordinates and effects on critical pathway. Results: In the aspect of group of application, there were various diseases in the overseas than in Korea. In domestic and overseas, the horizontal axis included mainly the time from the start of hospitalization to discharge and vertical axis of the critical pathway included commonly the following nine items : tests, diet, medications, consultations, activity, assessments, treatments, education, discharge planning. Preliminary critical pathway was mainly drawn up through chart review in both. Types of final critical pathway were mostly for medical team use in Korea and were for medical team and patient use in abroad. A person who coordinates critical pathway was mostly nurse in abroad. There was positive effects on critical pathway in both. Conclusion: Staff education and information about critical pathway are needed to use it effectively.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.41 no.3
• /
• pp.133-138
• /
• 2015

Objectives: To evaluate the influence of the type of osteotomy in the inferior aspect of the mandible on the mechanical performance. Materials and Methods: The study was performed on 20 polyurethane hemimandibles. A sagittal split ramus osteotomy (SSRO) was designed in 10 hemimandibles (group 1) with a vertical osteotomy in the buccal side (second molar level) and final osteotomy was performed horizontally on the lingual aspect, while the mandible body osteotomy was finalized as a straight osteotomy in the basilar area, perpendicular to the body. For group 2, the same osteotomy technique was used, but an oblique osteotomy was done in the basilar aspect of the mandibular body, forming continuity with the sagittal cut in the basilar area. Using a surgical guide, osteosynthesis was performed with bicortical screws using an inverted L scheme. In both groups vertical compression tests were performed with a linear load of 1 mm/min on the central fossa of the first molar and tests were done with models made from photoelastic resin. Data were analyzed using Student's t-test, establishing a statistical significance when P<0.05. Results: A statistical difference was not observed in the maximum displacements obtained in the two osteotomies (P<0.05). In the extensiometric analysis, statistically significant differences were identified only in the middle screw of the fixation. The photoelastic resin models showed force dissipation towards the inferior aspect of the mandible in both SSRO models. Conclusion: We found that osteotomy of the inferior aspect did not influence the mechanical performance for osteosynthesis with an inverted L system.