• 치과방사선
• /
• 제24권2호
• /
• pp.427-437
• /
• 1994

Clinical examination, photometric evaluation, & radiographic analysis have been used to evaluate the asymmetry of the face. Commonly used skull radiographs to assess skeletal asymmetry include poatero-anterior cephalometries, submentovertex view, & panoramic view. The purpose of this study is the comparison of the reliance of the postero-anterior cephalometric view, submentovertex view, & panoramic view in the asymmetry evaluation. All measurements were performed on the each radiographs of 31 control group & 30 asymmetric group. The measurements are MSL(midsagittal plane)-Co, MSL-Go, MSL-Me, MSL-Al, MSL-Bl, Mn. Ramus Height(Co-Go), Mn. Body Length(Go-Me), and Total Mn. Length(Co-Me). The results were as follows: 1. The lack of either a right-sided or left-sided asymmetric dominant was found. 2. The postero-anterior cephalometric view & submentovertex view relatively agreed with each other in the result. The postero-anterior cephalometric view & submentovertex view had the clinical reliability & effectiveness in the diagnosis of the skeletal asymmetry(p<0.05). 3. The panoramic view showed more magnification compared to the other radiographs. In the vertical measurements the panoramic view had clinical reliability relatively(p<0.05). But we cannot rely on the horizontal measurements in the panoramic view(p>0.05).

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• 제31권3호
• /
• pp.266-273
• /
• 2005

Purpose: To assess the relationship between soft tissue reference line and hard tissue reference line using the standardized photographs and the posteroanterior cephalometric radiographs(P-A)in facial asymmetric patients and to compare the differences of angular measurement between normal group and asymmetry group. Methods: Normal group consisted of 44 persons with normal occlusion and normal facial morphology. Asymmetry group consisted of 90 patients with facial asymmetry. Standardized facial photographs and P-A were taken in all subjects. The horizontal reference lines were bipupillary line in photographs and latero-orbitale line in P-A respectively. The vertical reference line were the line from the midpoint of horizontal reference line perpendicularly. Angular measurement of otobasion canting, lip canting, nose deviation, chin deviation, and maxillary deviation were compared and analyzed in photographs. And angular measurement of mastoid canting, mandibular canting, nose deviation, chin deviation, and maxillary deviation were compared and analyzed in P-A. Results: 1. The variables of photographs and P-A were significantly related in the asymmetry group. 2. Significant differences between all variables except for PT2 and PA2 were shown in the asymmetry group and between PT1 and PA1, PT3 and PA3 in the normal group respectively. 3. Comparison measurement scores of angular difference between control group and experimental group concerning each variable showed significant difference except for PA1. Conclusions: Soft tissue components may not compensate for underlying skeletal imbalance in nose deviation and chin deviation. The horizontal reference lines in photographs were significant related with the P-A, but angular variables between the two studies show significant differences. Therefore, we do not recommend use photography in the assessment the facial asymmetry as complemented in the P-A.

• 치과방사선
• /
• 제23권2호
• /
• pp.315-322
• /
• 1993

To evaluate of the relationship between the TMJ disorder and the vertical mandibular asymmetry, the author analyzed the differences between condylar heights, ramus heights and mandibular heights of both sides. All measurements were performed with a digital micrometer on the panoramic radiographs of 36 TMJ disorder patients and 30 normal control group. The differences were expressed in millimeters and percentage using the following formula; ｜(R-L)/(R+L)｜×100% The results were as follows : 1. The condylar height difference was greater of in patient group (1.86±1.66㎜) than that of in control group (1.22±0.85㎜)(p<0.05). But there was no significant difference in the condylar height ratio difference between patient group (11.67㎜11.44%) and control group (7.64±621%) (p>0.05). 2. The ramus height difference and ramus height ratio difference of patient group (4.52±3.70㎜, 4.39±3.49%) were greater than those of control group (2.64±2.13㎜, 2.46±2.02%)(p<0.05, p<0.01). 3. The mandibular height difference and mandibular height ratio difference of patient group (4.32±3.52㎜, 3.59±2.81%) were greater than those of control group (2.57±2.46㎜, 2.01±1.95%) (p<0.05). 4. The ratio difference in condylar height to ramus height and condylar height to mandibular height of patient group (5.01±4.13%, 3.36±2.88%) were greater than those of control group (2.33±1.78%, 1.90±1.40%) (p<0.01).

• 대한치과보철학회지
• /
• 제62권1호
• /
• pp.28-37
• /
• 2024

심한 하악 전돌증이 있는 환자의 경우 교정치료나 악교정수술을 활용하여 치료를 시도할 수 있으나, 장기간의 교정치료 및 수술의 침습적인 거부감이 있는 환자에서 보철적으로만 개선해야 하는 상황이 존재할 수 있다. 골격성 III급 부정교합 환자는 전방유도가 없으며, 수직적인 저작 양식을 보여주기 때문에 이러한 측면을 고려하여 치료하는 것이 중요하다. 또한, 전치부의 반대교합을 개선하기 위한 방법으로 교합수직고경을 거상하는 술식을 선택하기 쉬운데, 이는 종종 불리한 결과를 야기할 수 있으므로 신중한 진단 및 치료계획의 수립이 필요하다. 본 증례에서는 하악 전돌 및 비대칭을 가진 환자에서 단계적인 치료과정을 통하여 기존의 교합수직고경을 그대로 유지하며 임플란트 및 자연치를 이용한 최종 고정성 보철 수복을 진행하였다. 이에 기능적이고 심미적으로 적절한 결과를 보여, 환자의 진단 및 치료 과정에 대해 보고하고자 한다.

• 대한치과교정학회지
• /
• 제27권3호
• /
• pp.445-456
• /
• 1997

본 연구는 안면비대칭이 존재하는 사람에 있어서 상악치열궁의 좌우측 치아에서 전후방, 측방 그리고 수직 비대칭의 존재 유무와 상악 중절치의 치축경사 변화 정도및 이러한 비대칭 양상과 하악골의 편위 정도와의 상관성을 알아보고 정상군과의 비교를 통하여 상대적인 비대칭의 양상을 파악하고자 고안되어졌다. 부산대학교병원 교정과에 내원한 환자들 중 하악골의 편위를 동반한 골격성 비대칭을 가진 21명을 안면비대칭군으로 선정하고 임상적으로 양호한 안모를 가지고 골격성의 비대칭이 없는 20명을 정상군으로 선정한 후 상악치열궁모형과 정모두부방사선규격사진을 이용하여 상악치열궁을 이루는 좌우측 치아의 위치와 상악 중절치 치축경사, 그리고 상악 제1대구치의 수직위치를 계측하고 분석하여 다음과 같은 결과를 얻었다. 1. 안면비대칭군에서 치성 비대칭의 정도와 하악의 편위정도 사이에는 높은 상관성을 나타내지 않았다. 2. 안면비대칭군에서 악골이 편위된 측의 치아들이 더 측방으로 확장되어 있었다. 그리고 상악 제1대구치와 제2대구치의 전후방위치와 상악 중절치의 치축경사에서 차이가 있었다. 3. 안면비대칭군에서 측방 비대칭은 후방치아로 갈수록 증가되었으며 전후방 비대칭에 비해 더 크게 나타났다.

• 한국안전학회지
• /
• 제24권2호
• /
• pp.83-88
• /
• 2009

The objective of this paper was to evaluate the effectiveness of horizontal, vertical, asymmetric and coupling multipliers for manual material handling. Lifting tasks with 5 different horizontal distances ($30{\sim}70cm$) for 6 vertical distances(ankle, knee, waist, elbow, shoulder and head height) were experimented. The muscle activity and muscle exertion level during asymmetric load handling(without trunk flexion) was experimented. Lifting tasks with and without handle tote box for three postures(straight, bending, right angle posture) were experimented. The degrading tendency did not appeared almost in $60{\sim}70cm$ interval's horizontal distance. As a result of ANOVA, MVC paid attention to horizontal and vertical distance but cross effect was insignificant(p<0.01). The change of the MVC according to the horizontal, vertical distance appeared similar from of RWL. The results of normalized MVC measurement were decreased about 16%, 24%, 34% respectively as the asymmetry angle was $30^{\circ}$, $60^{\circ}$, $90^{\circ}$. RMS EMG values of right erector spinae muscles were decreased as the work posture went to $90^{\circ}$ and those of left erector spinae muscles were increased until the asymmetry angle was $40^{\circ}$ but decreased continually over $40^{\circ}$. 7 subjects, activities of left and right latissimus dorsi muscles were maintained constantly, while for remainer, those were irregular. MVC reduced maximum 23% by type of handle. MVC was highest in straight posture, but was lowest in right angle posture. As a result of ANOVA, MVC paid attention to posture, coupling(p<0.01). To all handle types, biceps brachii activity was increased in right angle posture, but reduced in straight posture. Based on the results of this study, it is suggested that the NIOSH guideline should not be directly applied to Korean without reasonable reexamination. In addition, we need to afterward study through an age classification.

• 한국소음진동공학회논문집
• /
• 제21권10호
• /
• pp.897-904
• /
• 2011

When whole-body is exposed to vertical vibration, asymmetry shape of human body affects the response on the translational(fore-aft, lateral, vertical) and rotational(roll, pitch, yaw) motion. While the translational motion has been studied with various titles, it has been rare to study the rotational motion of human body exposed to vertical excitation because of lack of experimental equipment. This study was performed by using a 6-axis force plate installing strain gage type sensors for the rotational response. Sixteen male subjects were exposed to vertical vibration on rigid seat in order to investigate apparent mass of three translational motion and apparent eccentric mass of three rotational motion. Random signal was generated to make excitation vibration which was on an effective frequency range of 3~40 Hz, and magnitude of 0.224 m/$s^2$ r.m.s. The frequency range and magnitude used was selected for the vibration of passenger vehicle on idling condition. As the result, cross-axis apparent masses of fore-and-aft and lateral direction were not significant showing 20 % and 3 % of vertical apparent mass relatively. And apparent eccentric mass of pitch motion was dominant when compared to that of roll and yaw motion, which is reasoned by asymmetry direction of human body sitting on a seat.

• 대한치과교정학회지
• /
• 제38권4호
• /
• pp.252-264
• /
• 2008

본 연구는 안면비대칭 환자의 악교정수술 시 경조직 이동에 따른 연조직 변화를 정면에서 평가함으로써 정면 얼굴 이미지 시뮬레이션 프로그램 개발에 도움이 되고자 시행되었다. 안면비대칭이 동반된 하악골 수술 예정 환자 45명을 대상으로 정모 두부방사선규격사진과 얼굴사진(photo)을 술전 및 술후에 각각 같은 각도로 촬영한 후, 술전 및 술후의 방사선사진을 이용하여 경조직 계측점의 변화를, 얼굴사진을 이용하여 연조직 계측점의 변화를 수평 및 수직으로 구분하여 각각 측정한 후 경조직 변화에 따른 연조직 변화를 비교 분석하였다. 연조직 변화와 경조직 변화의 상관성을 살펴본 결과 수평 방향, 수직 방향 모두에서 전반적으로 낮은 상관성을 보였으며, 1 : 1 mean ratio 산출을 위하여 서로 상관성이 가장 높은 경조직 계측점을 연조직 계측점별로 선택한 결과 직하방에 있는 경조직보다는 다소 멀리 떨어져 있는 경조직 계측점이 선택되는 경우가 많이 나타났다. 경조직 변화를 이용하여 연조직 변화를 예측할 수 있는 회귀방정식을 연조직 계측점별로 산출한 결과 연조직 수평변화 예측에 경조직 수직변화도 사용되고 연조직 수직변화 예측에 경조직 수평변화도 사용되었으며, 수평과 수직변화 모두에서 가장 설명력이 높은 방정식은 연조직 menton에서 나타났다. 이상의 연구결과 하부 경조직 계측점과 상부 연조직 계측점의 비율을 이용하는 1 : 1 mean ratio 방법은 불가능한 것으로 나타난 반면 회귀분석을 이용한 연조직 변화 예측은 임상에 도움이 될 수 있는 것으로 나타나 정면 이미지의 경우 컴퓨터를 이용한 시뮬레이션 프로그램이 반드시 필요함을 시사하였다.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제30권6호
• /
• pp.584-588
• /
• 2008

Facial asymmetry is particularly associated with mandible among other facial bones and it could be either congenital or acquired. Congenital factors are related to Treacher Collin syndrome, Pierre Robin syndrome, hemifacial microsomia and other various syndromes. Acquired factors are such as damaged or diseased growing condyles, hormonal disorder, oral mal-habit, muscular force, tumor, infection and so on. Diagnosis and treatment of facial asymmetry are complicated due to differences in sizes and positions of mandibles. The aspects of facial asymmetry is various and complicated upon each individual. Depending on causes of the facial asymmetry, there also are morphological differences. For such reasons, precise anatomical analysis and diagnosis of the facial asymmetry are essential before any surgical procedure followed by the appropriate treatment plan. This case is regarding a 21-year old patient diagnosed as the facial asymmetry due to an infantile maxillofacial surgery. Employing various morphological evaluations, potential problems during the procedure are predicted beforehand. This case reports a favorable result of sagittal split ramus osteotomy performing the oblique vertical bone cutting in posterior-superior of the mandibular second molar.

• 대한치과교정학회지
• /
• 제53권6호
• /
• pp.402-419
• /
• 2023

Objective: This study assessed the differences in soft tissue deviations of the nose, lips, and chin between different mandibular asymmetry types in Class III patients. Methods: Cone-beam computed tomography data from 90 Class III patients with moderate-to-severe facial asymmetry were investigated. The sample was divided into three groups based on the extent of mandibular rolling, yawing, and translation. Soft tissue landmarks on the nose, lips, and chin were investigated vertically, transversely, and anteroposteriorly. A paired t test was performed to compare variables between the deviated (Dv) and nondeviated (NDv) sides, and one-way analysis of variance with Tukey's post-hoc test was performed for intergroup comparisons. Pearson's correlation coefficient was calculated to assess the relationship between the soft and hard tissue deviations. Results: The roll-dominant group showed significantly greater differences in the vertical positions of the soft tissue landmarks between the Dv and NDv than other groups (P < 0.05), whereas the yaw-dominant group exhibited larger differences in the transverse and anteroposterior directions (P < 0.05). Moreover, transverse lip cant was correlated with the menton (Me) deviation and mandibular rolling in the roll-dominant group (P < 0.001); the angulation of the nasal bridge or philtrum was correlated with the Me deviation and mandibular yawing in the yaw-dominant group (P < 0.01). Conclusions: The three-dimensional deviations of facial soft tissue differed based on the mandibular asymmetry types in Class III patients with similar amounts of Me deviation. A precise understanding of soft tissue deviation in each asymmetry type would help achieve satisfactory facial esthetics.