• Journal of the Korean Society of Marine Environment & Safety
• /
• v.26 no.3
• /
• pp.242-253
• /
• 2020

This study examined the ef ects of freshwater discharge by artificial dikes from the Kanwol and Bunam lakes on the dynamics in the Chunsu Bay, Yellow Sea, Korea, during the summer season based on three-dimensional numerical modeling experiments. Model performances were evaluated in terms of skill scores for tidal elevation, velocity, temperature, and salinity and these scores mostly exceeded 90 %. The variability in residual currents before and after the freshwater discharge was examined. The large amount of lake water discharge through artificial dikes may result in a dramatically changed density field in the Chunsu Bay, leading to an estuarine circulation system. The density-driven current formed as a result of the freshwater inflow through the artificial dikes (Kanwol/Bunam) caused a partial change in the tidal circulation and a change in the scale and location of paired residual eddies. The stratification formed by strengthened static stability following the freshwater discharge led to a dramatic increase in the Richardson number and lasted for a few weeks. The strong stratification suppressed the vertical flux and inhibited surface aerated water mixing with bottom water. This phenomenon would have direct and indirect impacts on the marine environment such as hypoxia/anoxia formation at the bottom.

• Archives of Plastic Surgery
• /
• v.43 no.6
• /
• pp.551-558
• /
• 2016

Background Fascial free flaps have been widely used for reconstruction of the hand because they are thin. However, studies reporting objective data regarding the advantages of this approach are lacking. Thus, we report our experience with such flaps. Methods Forty-five cases of fascial free flaps between November 2006 and March 2014 were reviewed. Nine cases involving reconstructed dorsal or lateral defects were included. Four anterolateral thigh fascial free flaps and 5 lateral arm fascial free flaps were examined. Maximal flap contour was assessed by measuring reconstructed tissue thickness at the central area from the surface of the skin to below the bone in a vertical manner using ultrasonography and X-ray data. Contralateral regions were examined in the same manner and a comparative analysis was performed. A questionnaire survey regarding aesthetic satisfaction was also administered. Results All reconstructed parts had a thicker contour than the contralateral side. The average relative percentage of reconstructed tissue thickness was found to be 152% using ultrasonography and 143% using X-ray imaging. According to the aesthetic satisfaction survey, the average rate of satisfaction for patients was 62%, and satisfaction with the flap contour was 72%. Conclusions Using a fascial free flap, the reconstructed tissue was approximately $1.5{\times}$ as thick as the contour of the normal side, which led to positive responses regarding aesthetic satisfaction.

• Journal of Environmental Science International
• /
• v.19 no.12
• /
• pp.1361-1374
• /
• 2010

The impact of urbanization on local meteorology (e.g., surface temperature, PBL height, wind speed, etc.) in the Greater Seoul Area (GSA) was quantitatively evaluated based on a numerical modeling approach during a 1-month period of 2001 (9 Sep. through 8 Oct. 2001). The analysis was carried out by two sets of simulation scenarios: (1) with the global land use and topographic data from the U.S. Geological Survey (USGS) in 1990s (i.e., LU-USGS case) and (2) with the land use data from the Environmental Geographic Information System (EGIS) along with the 3 sec elevation data from the Shuttle Radar Topography Mission (SRTM) in 2000s (i.e., LU-EGIS case). The extension of urban areas in the GSA (especially, the southern parts of Seoul) accounted for 1.8% in the LU-USGS case and 6.2% in the LU-EGIS case. For the simulations, the surface temperature and PBL height due to urbanization in the LU-EGIS case was higher (the differences of up to $0.1^{\circ}C$ and 36 m, respectively) than those in the LU-USGS case, whereas the wind speed (up to 0.3 $ms^{-1}$) in the former was lower than that in the latter at 1500 LST. The increase in surface temperature due to urbanization in the GSA (especially, the southern parts of Seoul) was led to the strong convergence of air masses, causing the early sea breeze and its rapid propagation to inland locations. In addition, the vertical mixing motion in the extended urban areas for the LU-EGIS case was predicted to be stronger than that for the LU-USGS case and vice versa for the original urban areas.

• The Journal of Korean Academy of Prosthodontics
• /
• v.33 no.3
• /
• pp.440-452
• /
• 1995

A success of complete denture prosthesis can be determined by the satisfaction degree of the dentist and the patient. There are many factors influencing on the satisfaction of the complete denture patients. The purpose of this study is to analyze the correlation between the masticatory satisfaction and clinical evaluation, and the speech satisfaction and clinical evaluation in complete denture patients. 79 patients(total 119 complete dentures) were examined in this study who were treated in Seoul National University Dental Hospital. Through clinical evaluation, 2 examiners evaluated sex, age, edentulous period, the years of having used present complete denture, the number of the previous dentures, the state of the opposite arch, retention, stability, support, occlusion, vertical dimension of the complete denture and the condition of the residual alveolar ridge. Through questionnaires concerned with mastication and speech, examiners evaluate the satisfaction degree of the patients. This study led to the conclusion that : 1. The satisfaction degree of the mastication was lower in older patients(p<0.001) and in patients whose present complete denture period was shorter(p<0.05). The satisfaction degree of the mastication in male was higher than in female patients(p<0.01). 2. The satisfaction degree of the mastication was high when the retention of the complete denture was good(p<0.05), and when the condition of the residual alveolar ridge was good(p<0.05). 3. The satisfacion degree of the speech was high when the retention of the complete denture was good(p<0.01). 4. The satisfaction degree of the mastication was higher in patients with upper and lower complete denture than in patients with single complete denture whose oppsite arch was unilateral partial denture(p<0.05).

• 한국HCI학회:학술대회논문집
• /
• 2009.02a
• /
• pp.52-55
• /
• 2009

With the recent development of virtual reality, it has been actively investigated to develop user interfaces for immersive interaction. Immersive user interfaces improve the efficiency and the capability of information processing in the virtual environment providing various services, and provide effective interaction in the field of ubiquitous and mobile computing. In this paper, we propose an virtual reality platform "My Workspace" which renders an 3D virtual workspace by using an immersive user interface. We develop an interface that integrates an optical see-through head-mounted display, a Wii remote controller, and a helmet with infrared LEDs. It estimates the user's gaze direction in terms of horizontal and vertical angles based on the model of head movements. My Workspace expands the current 2D workspace based on monitors into the layered 3D workspace, and renders a part of 3D virtual workspace corresponding to the gaze direction. The user can arrange various tasks on the virtual workspace and switch each task by moving his head. In this paper, we will also verify the performance of the immersive user interface as well as its usefulness with the usability test.

• Steel and Composite Structures
• /
• v.36 no.2
• /
• pp.119-141
• /
• 2020

In this paper, wavy square absorbers were experimentally and numerically investigated. Numerical simulations were performed with LS-Dyna software on 36 wavy absorbers and their crushing properties were extracted and compared with the simple one. The effect of different parameters, including wave height, wave depth, and wave type; either internal or external on the crushing characteristics were also investigated. To experimentally create corrugation to validate the numerical results, a set of steel mandrel and matrix along with press machines were used. Since the initial specimens were brittle, they were subjected to heat treatment and annealing to gain the required ductility for forming with mandrel and matrix. The annealing of aluminum shells resulted in a 76%increase in ultimate strain and a 60% and 56% decrease in yield and ultimate stresses, respectively. The results showed that with increasing half-wave height in wavy square absorbers, the maximum force was first reduced and then increased. It was also found that in the specimen with constant diameter and half-wave depth, an increment in the half-wave height led to an initial increase in efficiency, followed by a decline. According to the conducted investigations, the lowe maximum force can be observed in the specimen with zero half-wave depth as compared to those having a depth of 1 cm.

• Asian Journal of Atmospheric Environment
• /
• v.7 no.3
• /
• pp.139-151
• /
• 2013

The purpose of this study is to understand distributional characteristics in the atmospheric concentrations of $O_3$ and its precursors based on data taken at the southern Korean coast. The average $O_3$ concentration in the high altitude was found to range from 32.3 to 90.8 ppb with a maximum concentration of 132 ppb. The ambient $O_3$ concentration was high at altitudes of 1000 m and 500 m above the southern sea near Gwangyang Bay and an industrial area containing emission sources. The daily mean concentrations of $NO_y$ and CO were 6.7-24.2 ppb and 0.152-0.487 ppm, respectively. During the aerial measurement period, the highest mean concentration of $O_3$ was observed on June 1. The aerial measurement results showed that the maximum ozone concentration was observed to be 132 ppb in the high altitude the southernmost part of Yeosu. The measurement of vertical wind fields in the air indicated that $O_3$ formed in the southernmost part of Yeosu was transported by strong southwesterly winds to the northeast of Gwangyang Bay. This led to a ground $O_3$ concentration of over 100 ppb in Jinju, the northeastern part of Gwangyang Bay. On August 9, when the maximum $O_3$ concentration was 50 ppb, the measurement results showed that $O_3$ concentrations were relatively low compared to other days. In particular, low $NO_2$ and TVOC concentrations were observed, both of which serve to form $O_3$ in photochemical reactions.

• Ocean and Polar Research
• /
• v.30 no.3
• /
• pp.261-275
• /
• 2008

The profile of a fixed site at station M ($34.77^{\circ}N,\;129.13^{\circ}E$) in the Korea Strait was studied from March 2006 to February 2007. The aim was to understand the relationship between the annual thermal stratification pattern and seasonal variation in phytoplankton community structure. Physicochemical factors including temperature, salinity and nutrient concentrations, which strongly influence the proliferation and diversity of phytoplankton, were measured. The study period was divided into three due to the characteristic of thermohaline structures; mixed I (March-May 2006), stratified (June-November 2006) and mixed II(December 2006-Feburuary 2007). Diatoms dominated during the mixed I (89%) and II (48%) periods, while nanoplankton group occupied over 83% of total population during the stratified period. The dominant species during the mixed I and II was Chaetoceros socialis (47% and 29%, respectively), while during the stratified period Gyrodinium sp.(4%) was the most dominant. Averaged total chl a concentrations during the mixed I and II periods were 0.61 mg $m^{-3}$ and 0.72 mg $m^{-3}$, respectively, which were at least two-fold higher than that during the stratified period (0.30 mg $m^{-3}$). The vertical mixing and convection process of the water column induced nutrient supply from the bottom layer to the euphotic zone. It also led to the dominance of diatoms during the mixed periods, whereas small phytoplankton prevailed over large phytoplankton as stratification blocked the upward movement of nutrients to subsurface during the stratified period. During the mixed I and II periods, microplanktonic chl a dominated concentrations (50% and 48%, respectively), while picoplanktonic chl a occupied over 37% of total chl a during the stratified period.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.42 no.1
• /
• pp.37-46
• /
• 2014

This paper describes the conceptual design and development test procedure of a unmanned scaled-down personal air vehicle(PAV) with drive and flight dual mode capability. Trade studies on operational requirements led to the suggestion of a quad tilt prop platform which has nacelle tilt capability with multi rotor configuration. Motors for propeller propulsion and driving mechanism were integrated into a single nacelle, then they were implemented by nacelle tilt mechanism for conversion between the drive and the flight modes. Primary design parameters and initial specifications were confirmed through conceptual design, then functional tests were performed with the test platforms for the drive and the flight modes.

• The korean journal of orthodontics
• /
• v.13 no.1
• /
• pp.15-30
• /
• 1983

This study was to investigate the effect of functional pressures of the tongue and lips on the incisor relationship. The incisor relationship was devided into two categories; one is vertical relationship which is subdevided into open bite, normal overbite and deep bite on the basis of overbite, and the other is anteroposterior relationship which is subdevided into cross bite, normal overjet and large overjet on the basis of overjet. The functional tongue and lip pressures exerted to incisors were measured with subminiature pressure sense from the 99 subjects, 19 of normal overbite and overjet, 26 of open bite, 18 of deep bite, 17 of cross bite and 19 of large overjet with age of 17-20, and cephalograms were taken from the same subjects. Functional pressures were analyzed and correlated to craniofacial veriables. The results of present investigation led to the following conclusions. 1. There were no differences in functional and maximum pressures by the tongue and lips exerted to maxillary incisors between normal occlusion, open bite, deep bite, cross bite and large overjet. 2. Significant differences in functional and maximum pressures by the tongue and lips exerted to mandibular incisors have been shown to exist between open bite and deep bite, but no differences between cross bite and large overjet. 3. Equilibrium between tongue pressures and lip pressures did not exist. 4. Significant differences in the ratio of upper functional and maximum pressures to lower pressures of the tongue and lips exerted to upper and lower incisors have been shown to exist between open bite and deep bite, and no differences between cross bite and large overjet. 5, There was significant correlation between functional and maximum pressures exerted to mandibular incisors and craniofacial variables, but not significant correlation between functional and maximum pressures exerted to maxillary incisors and craniofacial variables.