• Journal of the Korean Society of Hazard Mitigation
• /
• v.10 no.6
• /
• pp.175-183
• /
• 2010

In this study, laboratory experiments are conducted to investigate flow-fields around floating breakwaters by using the LDV(Laser Doppler Velocimetry) system. The LDV system is a well-known equipment to measure fluid particle velocities in laboratory experiments. Although the system requires great efforts and enormous time for measurements, it can provide precise velocity fields comparing to other available equipments. Various types of drafts and shapes for breakwaters are employed in laboratory experiments to analyze a relation between flow-fields and vorticity. A series of numerical experiments are also carried out by using a two-dimensional Navier-Stokes equations model. Numerically predicted results are compared with laboratory measurements.

• Journal of Institute of Control, Robotics and Systems
• /
• v.20 no.11
• /
• pp.1125-1130
• /
• 2014

In this paper, we discuss the relation between the motion profile and pre-filter. As previously reported in various literatures [1-3], a tuned motion profile can effectively reduce residual vibration by placing inherent zeros of the motion profile at the vibratory pole of systems similar to the role of the input shaping technique. From the results, we factorize the motion profile into a basis function and an input shaper. In contrast to the previously reported impulse-sequence-based input shapers, the input shaper extracted from the motion profile has unique characteristics. Thanks to the characteristics of the input shaper extracted from the motion profile, it has advantages to reduce the vibrations caused by not only the modeled vibratory mode but also unmodeled dynamics which exist in higher frequency ranges.

• Journal of The Korean Astronomical Society
• /
• v.47 no.3
• /
• pp.87-98
• /
• 2014

We develop a parallel cosmological hydrodynamic simulation code designed for the study of formation and evolution of cosmological structures. The gravitational force is calculated using the TreePM method and the hydrodynamics is implemented based on the smoothed particle hydrodynamics. The initial displacement and velocity of simulation particles are calculated according to second-order Lagrangian perturbation theory using the power spectra of dark matter and baryonic matter. The initial background temperature is given by Recfast and the temperature uctuations at the initial particle position are assigned according to the adiabatic model. We use a time-limiter scheme over the individual time steps to capture shock-fronts and to ease the time-step tension between the shock and preshock particles. We also include the astrophysical gas processes of radiative heating/cooling, star formation, metal enrichment, and supernova feedback. We test the code in several standard cases such as one-dimensional Riemann problems, Kelvin-Helmholtz, and Sedov blast wave instability. Star formation on the galactic disk is investigated to check whether the Schmidt-Kennicutt relation is properly recovered. We also study global star formation history at different simulation resolutions and compare them with observations.

• Physical Therapy Korea
• /
• v.5 no.2
• /
• pp.23-38
• /
• 1998

The objective of this study was to identify the effects of pelvic tilting exercise on gait patterns of hemiplegic patients. The subjects of this study were 31 hemiplegic in- and out-patients of the Rehabilitation Hospital, Yonsei University Medical Center, from September 24, 1997 through November 5, 1997. Pre- and post-treatment change in gait patterns were measured using a ink foot-print. The data were analyzed by the paired t-test, one-way ANOVA, and independent t-test. The findings were as follows: The difference in gait patterns between pre- and post-treatment was statistically significant, with an increase in gait velocity to 7.98 cm/sec post-treatment; an increase in cadence to 7.29 steps/min; a narrowing of the base of support to 1.33 cm; an increase in step length of 3.92 cm on the less affected side and 3.73 cm on the more affected side; an increase in stride length of 5.82 cm on the less affected side and 5.92 cm on the more affected side(statistically not significant in foot angle). In relation to sex, age, cause of stroke, and laterality of paralysis, the difference in gait patterns between pre- and post-treatment was not statistically significant. Where there was no significant difference of the effects of pelvic exercise regarding the degree of spasticity, the presence of a decrease in proprioception, and the duration of treatment. In conclusion, hemiplegic pelvic tilting exercise was found to have transmitting positive effect in improving gait patterns.

• Journal of Ocean Engineering and Technology
• /
• v.22 no.4
• /
• pp.20-26
• /
• 2008

The primary purpose of this study was to quantitatively examine whether there was a difference in the settling velocities of cohesive sediments in the Saemankeum artificial lake before and after the closure of the Saemankeum seadike. Through in situ sediment sampling and laboratory experiments, the settling velocities were estimated as a function of the suspension concentration and their physico-chemical properties, such as grain size distribution, the percentage of organic contents, mineralogical composition, etc. were also examined. In this study, their inter-relation with settling velocities were also analyzed qualitatively. The result of the settling tests for Saemankeum sediments showed that there was a big difference in the settling velocities before and after the closure of the Saemankeum seadike. Its settling velocities in a flocculated settling region became remarkably larger after the closure compared to those before the closure, while they were similar but relatively smaller in a hindered settling region. This was found to be mainly due to the difference in their grain size.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.23 no.10
• /
• pp.1254-1264
• /
• 1999

A three-dimensional coupled turbulent fluid flow and solidification process were analyzed in a continuous casting process of a steel slab with Electromagnetic Brake(EMBR). A revised low-Reynolds number $k-{\varepsilon}$ turbulence model was used to consider the turbulent effects. The enthalpy-porosity relation was employed to suppress the velocity within a mushy region. The electromagnetic field was described by Maxwell equations. Tile application of EMBR to the mold region results in the decrease of the transfer of superheat to the narrow face, the increase of temperature in free surface region and most liquid of submold region, and the higher temperature gradient near the solidifying shell. The increasing magnetic flux density effects mainly to the surface temperature of the solidifying shell of narrow face, hardly to the one of wide face. It is seen that in the presence of EMBR a thicker solidifying shell is obtained at the narrow face of the slab.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.19 no.8
• /
• pp.1927-1939
• /
• 1995

An experimental investigation is conducted to find out the large scale coherent structures in the intermediate wake past a rotating cylinder with a single tripping wire attached. Relation between the vortex shedding frequency and the spin rate of rotating cylinder and the effects of the tripping wire on the flow characteristics were studied by using spectral analysis and conditional phase average technique, respectively. It is found that the vortex shedding frequency is bound to a certain range and varies regularly as spin rate increases. The coherent structures are compared with those of the plain rotating cylinder in the case of spin rate of 1.0. Distance between the upper and lower center of vortices increase and the vortex shedding time is delayed, the velocity fluctuation energy decreases near the center line of vortices and it spreads out to the outer region. The Reynolds shear stress increases highly in the upper region and the turbulent wake width expands with strong entrainment process.

• Journal of the Society of Naval Architects of Korea
• /
• v.52 no.4
• /
• pp.330-337
• /
• 2015

When a tower crane is carried by a transporter in shipyard, the height and length of the tower crane should be adjusted to meet the safety guidelines. Since the guidelines came from the field experience, the safety limitation needs to be analyzed by a computer simulation. In this paper, modeling methods are addressed to implement the appropriate transportation simulation of a tower crane. For the relation between the tower crane and the transporter, normal contact force, friction force, and kinematic constraints are compared. Assignment of relevant linear acceleration and angular velocity is considered for the transporter to start or move on an inclined ground surface. By using the examined modeling methods, the dynamic motion of tower crane transportation is analyzed by a dynamic simulation program, and comparison between the simulation result and analytic solution is made to verify the feasibility of the modeling methods.

• Journal of Power System Engineering
• /
• v.17 no.2
• /
• pp.56-62
• /
• 2013

A technique is presented that uses a circular waveguide for the measurement of the bulk shear (S-wave) velocities of unconsolidated, saturated media, with particular application to near surface soils. The technique requires the measurement of the attenuation characteristics of the fundamental torsional mode that propagate along an embedded pipe, from which the acoustic properties of the surrounding medium are inferred. From the dispersion curve analysis, the feasibility of using fundamental torsional mode which is non-dispersive and have constant attenuation over all frequency range is discussed. The principles behind the technique are discussed and the results of an experimental laboratory validation are presented. The experimental data are best fitted for the different depths of wetted sand and the shear velocities are evaluated as a function of depths. Also the characteristics of the reflected signal from the defects are examined and the reflection coefficients are calculated for identifying the relation between defect sizes and the magnitude of the reflected signal.

• Journal of The Korean Astronomical Society
• /
• v.41 no.5
• /
• pp.109-119
• /
• 2008

We present an optical-infrared photometric study of galaxies in six nearby clusters of galaxies at $z=0.041{\sim}0.098$ (A1436, A1773, A1809, A2048, A2142, and A2152). Using BV I photometry obtained at the Bohyunsan Optical Astronomical observatory and $JHK_S$ photometry extracted from the 2-Micron All-Sky Survey catalog, we investigate the colors of galaxies in the clusters. Using the (B - V) versus ($I\;-\;K_S$) color-color diagrams in comparison with the simple stellar population model, we estimate the ages and metallicities of bright early-type member galaxies. Early-type galaxies in each cluster show the color-magnitude relation. Ages and metallicities of early-type members show little dependence on their velocity dispersions. Mean ages of early-types in the clusters range from 3 Gyr to 20 Gyr, showing a large dispersion, and mean metallicities range from Z = 0.03 to 0.05 above the solar value, showing a negligible dispersion.