• Journal of the Society of Naval Architects of Korea
• /
• v.28 no.1
• /
• pp.60-68
• /
• 1991

The updated Lagrangian Finite Element Method is introduced to analyse rigid body-fluid impact problem which is characterized by incompressible Navier-Stokes equations and impact-contact conditions between free surface and rigid body. For the convenience of numerical computation, velocity fields are splinted into vicous and pressure parts, and then the governing equations and boundary conditions are decomposed in accordance with the decomposition. However, Viscous stresses acting an the solid boundaries are neglected on the assumption that very small velocity gradients may occur during extremely small time interval of the impact. Four coded quadrilateral elements are used to discretize the space domain and the fully explicit time-marching algorithm is employed with a reasonably small time step. At the beginning of each time step, contact velocity of the rigid body is computed from the momentum balance between the body and the fluid. The velocity field is then computed to satisfy the discretized equations of motions and incompressibility and contact constraints as well as an exact free surface boundary condition. At the end of each time step, the fluid domain is updated from the velocity field. In the present time stepping numerical analysis, behaviour of the free surface near the body can be observed without any difficulty which is very important in the water impact problem. The applicability of the algorithm is illustrated by a wedge type falling body problem. The numerical solutions for time-varying pressure distributions and impact loadings acting ion the surface are obtained.

• Korean Journal of Environmental Agriculture
• /
• v.9 no.2
• /
• pp.133-141
• /
• 1990

For the purpose of evaluating nutrient loadings into rivers and lakes from agricultural land, especially from paddy fields and also nutrient degradation in drainage channels, the Total Kjeldahl Nitrogen(TKN) and the Total Phosphorus(TP) were investigated in 29.5 ha. paddy fields in Hwa-Sung, Kyong-Ki, Korea, during the period from May 8, 1989 to Sep. 27, 1989. The results of the study can be su㎜arized as follows : 1. Annual inputs into paddy fields were 180 N-kg/ha 46 P-kg/ha. by fertilization, and 15.0 TKN-kg/ha. 10.0 TP-kg/ha. by irrigation, 8.0 TKN-kg/ha. 0.34 TP-kg/ha. by rainfall respectively. The amount of nutrient involved in surface runoff from paddies was 39.0 TKN-kg/ha. 9.2 TP-kg/ha. and in seepage 7.5 TKN-kg/ha. 2.1 TP-kg/ha. respectively 2. In WS1 stream(reach length equals 950m), nutrients decreased 0.31 TKN-mg/L/km, 0.01 TP-mg/L/km and in WS2 stream (reach length equals 750m) which are more meandering and undulating than WS1, the nutrients decreased 0.84 TKN-mg/L/km, 0.11 TP-mg/L/km. From these results, it was concluded that low stream velocity due to meandering and undulation promotes more degradation of nutrient concentrations. 3. For the purpose of decreasing nutrient loads from paddy fields, the amount of fertilizer used needs to be controlled, irrigation weirs need to be constructed in the drainage channels to delay the transportation of nutrients by decelerating the stream velocity and plants such as plantain-lily need to be cultivated in the channel to consume nutrients and therefore enlarge chances of self-purification.

• Journal of Mechanical Science and Technology
• /
• v.17 no.3
• /
• pp.380-390
• /
• 2003

This paper addresses the problem of the modeling and vibration control of tapered rotating blade modeled as thin-walled beams and incorporating damping capabilities. The blade model incorporates non-classical features such as anisotropy, transverse shear, secondary warping and includes the centrifugal and Coriolis force fields. For the rotating blade system, a thorough validation and assessment. of a number of non-classical features including the taper characteristics is accomplished. The damping capabilities are provided by a system of piezoactuators bonded or embedded into the structure and spread over the entire span of the beam. Based on the converse piezoelectric effect, the piezoactuators produce a localized strain field in response to a voltage and consequently, a change of the dynamic response characteristics is induced. A velocity feedback control law relating the piezoelectrically induced transversal bending moment at the beam tip with the appropriately selected kinematical response quantity is used and thebeneficial effects upon the closed-loop dynamic characteristics of the blade are highlighted.

• Journal of the korean society of oceanography
• /
• v.34 no.2
• /
• pp.59-72
• /
• 1999

Cavitating fluid sea ice model of Plato and Hibler (1992) is applied to the Southern Ocean with an idealized, circular Antarctica. Using climatological atmospheric forcing fields averaged in the zonal direction, we show that oceanic heat flux and ice velocity have major effects on the seasonal change of ice edge, as other studies showed. In our model results, there appears a zone of free drift that contains a polynya zone. Thermodynamic forcing functions make dominant contributions to daily increments of ice thickness and compactness, except the zones of ice edge and polynya. The dominant contributions are also shown in distributions of the temperature on ice surface and several to terms in surface heat balance equation, and are also confirmed by those obtained from the thermodynamic-only model with the different locations of ice edge.

• Proceedings of the KSME Conference
• /
• 2007.05b
• /
• pp.2494-2499
• /
• 2007

Self-blast circuit breakers utilize the energy dissipated by the arc itself to create the required conditions for arc quenching during the current zero. The high-current simulation provides information about the mixing process of the hot PTFE cloud with $SF_6$ gas which is difficult to access for measurement. But it is also hard to simulate flow phenomenon because the flow in interrupter with high current, $SF_6$-PTFE mixture vapor and complex physical behavior including radiation, calculation of electric field. Using a commercial computational fluid dynamics(CFD) package, the conservation equation for the gas and temperature, velocity and electric fields within breaker can be solved. Results show good agreement between the predicted and measured pressure rise in the thermal chamber.

• Proceedings of the KSME Conference
• /
• 2007.05b
• /
• pp.2879-2884
• /
• 2007

Dynamic responses of electrorheological (ER) fluids in steady pressure flow to stepwise electric field excitations are investigated experimentally. The transient periods under various applied electric fields and flow velocities were determined from the pressure behavior of the ER fluid in the flow channel with two parallel-plate electrodes. The pressure response times were exponentially decreased with the increase of the flow velocity, but increased with the increase of the applied electric field strength. In order to investigate the cluster structure formation of the ER particles, it was verified using the flow visualization technique that the transient response of ER fluids in the flow mode is assigned to the densification process in the competition of the electric field-induced particle attractive interaction forces and the hydrodynamic forces, unlike that in the shear mode determined by the aggregation process.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.6 no.1
• /
• pp.51-57
• /
• 1981

Carriers moving in a semiconductor can impart gain or loss to an acousic wave traveling through Piezo-electric materials. In this paper, surface a coustic wave amplifiers, which employ the interaction between carriers drifting in a semiconduct or film and electic fields accompanying a Rayleigh wave propagating on a Piezoelectric substrate, are described. The effect of various electromagnetic boundary condition on th propagation of surface waves in Piezoelectrics is considered. An expression for the dependence of surface wave velocity on electic boundary conditions is derived. Calculations show that, for properly prepared material, significant amplification is expected up to the microwave frequencies. At high frequencies, gain is reduced because electro diffusion smooths out the electron bucning necessary for amplification.

• Proceedings of the KIEE Conference
• /
• 2004.07c
• /
• pp.1766-1768
• /
• 2004

This paper describes the prediction of location of PD signals in GIS using the difference in the measured time between first and second wave arrival by the external-type PD sensors. It is well accepted that the electromagnetic wave in GIS propagates at the velocity of $3{\times}10^8$m/s. Consequently, we could identify the location of PD with high accuracy. The experience at the fields and the problems for the judgment are also discussed in detail.

• Proceedings of the Korea Association of Crystal Growth Conference
• /
• 1997.10a
• /
• pp.39-43
• /
• 1997

Mercurous chloride (Hg$_2$Cl$_2$) has many advantages in its applications to acousto-optic, and opto-electronic devices because it has the unique properties of a broad transmisson range, well into the far infra-red, a low acoustic velocity, a large birefringence, and a high acousto-optic figure of merit[1]. Hg$_2$Cl$_2$ has a high vapor pressure, hence single crystals are usually grown by physical vapor transport(PVT) method in closed silica glass ampoules. We discuss the application of the laser Doppler velocimetry to measure the flow field inside a closed ampoule. The experimental results, are discussed its relationship to computational model and compared to their expectations.

• Korean Journal of Computational Design and Engineering
• /
• v.15 no.2
• /
• pp.106-114
• /
• 2010

The swept volume, the region of a moving object, is applied in many fields such as valid paths for motions of tools, visualization in robot paths and interference tests for parts assembling or disjointing. The shape of a swept volume depends on an generators computed with normal vectors of an object and velocity vectors of a motion. Although free-from surfaces are widely used to represent geometric models in CAD, computing the generators for a free-form object is a formidable task. Previous approaches exploit the closed form expressions of generators but limited to planer or quadric faces. In this paper, we propose the algorithm to compute swept volumes generated by free-form objects in screw motions. For the algorithm a tracing method is applied to the computation of generators. It considers curvatures of surfaces of an object to increase the computational accuracy. We implemented our algorithm in the CATIA V.5 environment to test the validity of our algorithm and to generate examples.