• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.25 no.7
• /
• pp.993-999
• /
• 2021

Recently, many studies on VNDN technology have been conducted to graft Named Data Networking (NDN) into VANET as a core network technology. VNDN can use the content name to deliver various infotainment application content data through name-based forwarding. When VNDN is used as a communication technology for infotainment applications in connected vehicles, it is possible to realize data-centric networking technology in which data is the subject of communication. It can overcome the limitations of connected vehicle infotainment application service technology based on the host-centric current Internet, such as security attack/hacking, performance degradation in long-distance data transmission, frequent data cut-off. In this paper, we present the main functions provided by VNDN technology, and systematically analyze and organize the issues necessary to realize infotainment application services for connected vehicles in the VNDN environment. Based on this, it can be utilized as basic information necessary to establish infotainment application requirements in VNDN environment.

• The Journal of Korean Institute of Next Generation Computing
• /
• v.13 no.5
• /
• pp.51-70
• /
• 2017

The reliability of broadcasting over vehicular ad hoc networks (VANETs) is one of the most critical factors for driving safety applications. There exists limitations to improve the reliability of broadcast transmissions in saturated VANETs where previous proposals in literature tackle the problem by heuristically adapting the size of the contention window (CW). This paper considers improving the reliability by proposing a new probability model based on the counting methods of permutations and combinations, which counts all the possible cases of broadcast failures in a single-hop broadcast transmission for a given CW. From the model, we calculate the best CW size given the number of contention nodes, which significantly improves the reliability and satisfying the timely dissemination of emergency broadcasting messages. Through extensive VANET simulations with varying densities, we show that our model maintains near 100 percent success rate for single-hop broadcast as well as multi-hop broadcast (e.g. 40 hops) and achieves minimal broadcast delay.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.39C no.10
• /
• pp.957-966
• /
• 2014

Video Stabilization For Vehicular Applications Is An Important Method Of Removing Unwanted Shaky Motions From Unstable Videos. In This Paper, An Improved Video Stabilization Method With Image Stitching Has Been Proposed. Scale Invariant Feature Transform (Sift) Matching Is Used To Calculate The New Position Of The Points In Next Frame. Image Stitching Is Done In Every Frame To Get Stabilized Frames To Provide Stable Video As Well As A Better Understanding Of The Previous Frame'S Position And Show The Surrounding Objects Together. The Computational Complexity Of Sift (Scale-Invariant Feature Transform) Is Reduced By Reducing The Sift Descriptors Size And Resticting The Number Of Keypints To Be Extracted. Also, A Modified Matching Procedure Is Proposed To Improve The Accuracy Of The Stabilization.

• Journal of the Korean Institute of Telematics and Electronics B
• /
• v.32B no.10
• /
• pp.1247-1258
• /
• 1995

Input-output decoupling is well-known to be effective in the control of the nonlinear systems. This paper points out some problems of this technique in applications, and obtains a new digital input-output decoupling feedback law by using the inherent structure of the system. The effectiveness (accuracy) of our new control technique are confirmed by simple computer simulations. Finally, a digital compensator is also designed. The problems we study are of importance in the field of nonlinear control of robots, aerospace navigation, and vehicular control. The methodology to be employed involves both algebraic and geometric aspects of the systems.

• 한국신재생에너지학회:학술대회논문집
• /
• 2005.06a
• /
• pp.227-230
• /
• 2005

There is a worldwide interest In the development and commercialization of PEMFCs for vehicular and stationary applications. The major problem in the practical use of PEMFCs is the deactivation of the Pt anode electrocatalyst by the adsorption of carbon monoxide. Therefore, intensive work has been devoted to finding electrocatalysts that are tolerant to CO in hydrogen at operating temperatures bellow $100^{\circ}C$. Also, DMFC is considered to be one of the most promising technologies for energy generation. But, the most important problem associated with the DMFC is the slow reaction rate of methanol oxidation and the second major problem is fuel crossover. So, the performance of a state-of-the-art DMFC is considerably lower than that of hydrogen-fuelled PEMFC. In this research, the preparation and characterization of electrode materials will be introduced. Also, some electrochemical techniques for the characterization of PEMFCs will be presented.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.58 no.2
• /
• pp.116-121
• /
• 2009

Distributed power systems (DPSs) has been widely used various industrial/military applications due to their various advantages. Furthermore, the "All electric" concept, in conjunction with DC DPS, appears to be more advanced and mature in the AEV(All-Electric Vehicular) industry. Generally, AEV carry many loads with varied functions. However, there may be large pulsed loads with short duty ratios which can affect the normal operation of other loads. In this paper, a converter with spilt capacitors and a simple adaptive controller is proposed as a active damping device to mitigate the voltage transients on the bus. The proposed converter allows the smaller capacitive storage. In addition, the proposed control approach has the advantage of requiring only one sensor and performing both the functions of mitigating the voltage bus transients and maintaining the level of energy stored. The control algorithm has been implemented on a TMS320F2812 Digital Signal Processor (DSP). Simulation and experimental results are presented which verify the proposed control principle and demonstrate the practicality of the circuit topology.

• Journal of the Korean Electrochemical Society
• /
• v.12 no.2
• /
• pp.167-172
• /
• 2009

Direct methanol fuel cells(DMFCs) are receiving significant attention in the portable power source and electric vehicular transportation because of its high energy efficiency as liquid fuel, low cost, and no requirement of fuel reforming process. In this study, we synthesized the Sulfonated poly(ether ether ketone) (SPEEK) to evaluate the possibility of use as a proton exchange membrane for DMFC. And poly(vinylidienedifluoride) (PVDF) was used to increase proton conductivity in SPEEK and simultaneously to prevent methanol transport through the cross linked membrane. Furthermore, in order to improve the electrical composite properties for DMFC applications.

• Proceedings of the IEEK Conference
• /
• 2006.06a
• /
• pp.235-236
• /
• 2006

IEEE 802.16 networks support mobile stations (MSs) to access broadband wireless networks while moving at a vehicular speed. However, IEEE 802.16 networks do not provide link layer native multicast capability because of point-to-multipoint connection characteristic. Due to this feature, it is not easy to adopt protocols or applications which need native link layer multicast capability. In order to solve the multicast support problem, we use the built-in LAN emulation feature of IEEE 802.16 which is based on Convergence Sublayer (CS). Our proposed operational procedures support not only the delivery of link local scope multicast packets, but also the delivery of non-link local scope multicast packets such as site local or global scope multicast packets. We also present the method of forming multicast Connection Identifier (CID) which is used to transport IP packets over IEEE 802.16 networks.

• Journal of Communications and Networks
• /
• v.15 no.2
• /
• pp.179-190
• /
• 2013

Given the bandwidth assignment for dedicated short range communications for use in vehicular ad-hoc network (VANET) and the expected introduction of equipment in the next few years, we elaborate on how VANET can support infotainment services. We define an architectural model for the integration of VANETs and cellular networks, according to a push mode paradigm where VANETs are used primarily to disseminate service announcements and general interest messages. Cooperation with cellular network is addressed by comparing architecture alternatives. A set of information dissemination protocols for VANETs is compared via simulations on a real urban map. Some results from a lab testbed based on IEEE 802.11p boards are presented along with an application developed for Android operating system to demonstrate the concept of the paper.

• Journal of Korea Society of Industrial Information Systems
• /
• v.15 no.4
• /
• pp.1-5
• /
• 2010

To operate safely VANET applications, authenticaton is necessary to identify val d participants and prevent malicious parties from modifying messages. This paper proposes an efficient authentication protocol for the vehicle registration in VANET environment. The topology of VANET changes rapidly due to high-speed movement of vehicles, thus it is need to reduce the computational burden of the authentication protocol. Therefore, this protocol uses only one-way hash functions and EOR operations to register vehicles.