• Ocean Systems Engineering
• /
• v.9 no.4
• /
• pp.391-407
• /
• 2019

Tracking the location (position) of a surface or underwater marine vehicle is important as part of guidance and navigation. While the Global Positioning System (GPS) works well in an open sea environment but its use is limited whenever testing scaled-down models of such vehicles in the laboratory environment. This paper presents the design, development and implementation of a low energy ultrasonic augmented single beacon-based localization technique suitable for such requirements. The strategy consists of applying Extended Kalman Filter (EKF) to achieve location tracking from basic dynamic distance measurements of the moving model from a fixed beacon, while on-board motion sensor measures heading angle and velocity. Iterative application of the Extended Kalman Filter yields x and y co-ordinate positions of the moving model. Tests performed on a free-running ship model in a wave basin facility of dimension 30 m by 30 m by 3 m water depth validate the proposed model. The test results show quick convergence with an error of few centimeters in the estimated position of the ship model. The proposed technique has application in the real field scenario by replacing the ultrasonic sensor with industrial grade long range acoustic modem. As compared with the existing systems such as LBL, SBL, USBL and others localization techniques, the proposed technique can save deployment cost and also cut the cost on number of acoustic modems involved.

• Journal of ILASS-Korea
• /
• v.23 no.3
• /
• pp.128-135
• /
• 2018

In this study, the following conclusions could be obtained from the analysis of emissions contribution rates and features for contaminated emissions by 13,456 gasoline vehicles passed in the vehicle load test (ASM-idle) under the inspection year 2013 to 2017. It was confirmed that the contamination of the CO, HC, NOx by the displacement is reduced on over 3L engine. As a result of comparing the exhaust gas in the low speed idle mode and the AS2525 mode, the exhaust gas in the low speed idle mode was measured high. It is estimated that if ISG function is applied, emissions from idle condition will be reduced. NOx emissions were reduced when the engine power was above 200HP. It has been confirmed that the amount of exhaust emissions are significantly reduced for vehicles manufactured after 2004. As a result of analyzing the exhaust gas according to the season, it is judged that there is a correlation between HC and NOx according to the ambient temperature. The concentration of exhaust emission in vehicles with high accumulated distance increases, which is considered to be the result of aging of the vehicle.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.28 no.2
• /
• pp.8-17
• /
• 2005

This paper dealt with a kind of heterogeneous vehicle routing problem with known demand and time deadline of customers. The customers are supposed to have one of tight deadline and loose deadline. The demand of customers with tight deadline must be fulfilled in the deadline. However, the late delivery is allowed to customers with loose deadline. That is, the paper suggests a model to minimize total acquisition cost, total travel distance and total violation time for a fleet size and mix vehicle routing problem with time deadline, and proposes a heuristic algorithm for the model. The proposed algorithm consists of two phases, i.e. generation of an initial solution and improvement of the current solution. An initial solution is generated based on a modified insertion heuristic and iterative Improvement procedure is accomplished using neighborhood generation methods such as swap and reallocation. The proposed algorithm is evaluated using a well known numerical example.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.17 no.2
• /
• pp.153-159
• /
• 2018

This paper suggests a way to improve the strength of the driveshaft, which is a vulnerable part of the drive axle system, for a 3.5-ton commercial vehicle. The driveshaft is composed of a universal joint with a spider and yoke, yoke shaft, etc. The driveshaft is developed by choosing design parameters for the spider and yoke such as the diameter and distance through the structural analysis of the driveshaft's components. Some driveshaft design cases have been made and analyzed with ANSYS; the strength of the driveshaft parts are validated from these results to propose an optimal design case. Finally, we suggest a driveshaft system that satisfies the working conditions for a 3.5-ton commercial vehicle.

• Journal of Korean Institute of Industrial Engineers
• /
• v.37 no.2
• /
• pp.144-152
• /
• 2011

Most of the models for the vehicle routing problems studied in the literature assumed constant travel times. However, those approaches may give infeasible solutions when traffic congestion causes delays in travel time. To overcome such difficulty, there have been some researches considering the change of the travel time which is called the time dependent vehicle routing problem (TDVRP). TDVRP assumes that the travel time between two locations is not only affected by the distance traveled, but by many other factors including the time of the day. In this paper, we propose a branch-and-price algorithm to solve the TDVRP. The time dependent property of the travel time is dealt with an enumeration scheme with bounding procedures in the column generation procedure identifying a profitable route. The proposed algorithm guarantees the "Non-passing" property to be held in the solutions. The algorithm was tested on problems composed of the Solomon's benchmark instances for 25 and 50 nodes. Computational results are reported.

• Journal of the Korean Society of Safety
• /
• v.23 no.2
• /
• pp.45-50
• /
• 2008

The purpose of the present study was to investigate the age difference in driving behavior(more specifically, left-turn). The participants were instructed to report whether they can turn left their car in the T-shape road(road and other vehicles' behavior relating to driver's tasks were recorded in advance and projected the simulation screen) after the leading vehicle passed them(i.e., before the target vehicle arrived). The participants' judgment accuracy and response bias were analyzed by using signal detection theory. The results showed that the old group tended to be less sensitive but more confident in their judgement of turning left their car. In particular, both age groups appeared to more depend on the distance from observation location to approaching vehicle rather than arrival times or driving speeds of the approaching vehicle.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.25 no.1
• /
• pp.19-27
• /
• 2017

In this paper, a simulator hardware and control design for an electronic parking brake (EPB) are proposed for emergency vehicle braking when the hydraulic break and anti-lock brake systems (ABS) fail to function. EPB systems are designed specifically for park braking and are usually installed on the rear wheels. However, in an emergency situation when all vehicle brake systems fail, the EPB can be utilized to stop the vehicle and track the target slip ratio as the ABS. This paper analyzed the non-linear EBP of the type of motor on caliper (MoC) based on experiments. A simulator hardware is also designed to validate the performance of the designed EPB controller in terms of braking distance and performance in tracking the target slip ratio. Through the experimental analysis, it is confirmed that a sliding mode controller can be applied on a non-linear EPB to track the target slip ratio.

• The Journal of the Korea Contents Association
• /
• v.8 no.3
• /
• pp.47-54
• /
• 2008

In order to realize Intelligent Transport System (ITS) without any road facilities support, Inter-vehicle Communication (IVC) is increased attention. IVC makes it possible to exchange real-time information among vehicles without centralized infrastructure. The IVC systems use multi-hop broadcast to disseminate information. In this paper, we propose the improved AODV routing protocol based on location information. The proposed AODV routing protocol transmits Hello packet with location information to calculate the distance between nodes. Then it achieves fast link recovery. We confirm the throughput performance of the proposed AODV routing protocol compared with the AODV routing protocol using Qualnet ver.3.8 simulator.

• Journal of Advanced Navigation Technology
• /
• v.4 no.2
• /
• pp.143-151
• /
• 2000

In this paper, short range IVC(Inter-Vehicle Communication) channel is modeled in three kinds considering rain attenuation and oxygen absorption. And the performance of DS/CDMA communication system in one path Rician model suitable for platton driving which is the final goal of AVHS(Advanced Vehicle & Highway System) is analyzed. Also, the reflection coefficients in 60 GHz is calculated. For the performance improvement both BCH channel coding and MRC diversity reception technique are adopted. The BER performance is evaluated as a function of packet length, Rician depth and the distance between vehicles.

• Journal of Korea Multimedia Society
• /
• v.14 no.12
• /
• pp.1536-1543
• /
• 2011

Video stabilization is a very important step for vision based applications in the vehicular technology because the accuracy of these applications such as obstacle distance estimation, lane detection and tracking can be affected by bumpy roads and oscillation of vehicle. Conventional methods suffer from either the zooming effect which caused by a camera movement or some motion of surrounding vehicles. In order to overcome this problem, we propose a novel video stabilization method using FOE(Focus of Expansion). When a vehicle moves, optical flow diffuses from the FOE and the FOE is equal to an epipole. If a vehicle moves with vibration, the position of the epipole in the two consecutive frames is changed by oscillation of the vehicle. Therefore, we carry out video stabilization using motion vector estimated from the amount of change of the epipoles. Experiment results show that the proposed method is more efficient than conventional methods.