• Proceedings of the KIEE Conference
• /
• 2004.11c
• /
• pp.508-510
• /
• 2004

In this paper, we proposed the GPS position data correction method for autonomous land navigation using vanishing point property and a monocular vision system. Simulations are carried out over driving distances of approximately 60 km on the basis of realistic road data. In straight road, the proposed method reduces GPS position error to minimum more than 63% and positioning errors within less than 0.5m are observed. However, the average accuracy of the method is not presented. because it is difficult to estimate it in curve road or other road environments.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.12 no.1
• /
• pp.114-122
• /
• 2009

An adaptive Kalman filter is designed as a post-navigation filter to improve the accuracy of GPS receiver's navigation performance in high dynamic environments. Not only the adaptive Kalman filter reduces the large noise error of navigation data which is obtained by least square method, but also the filter is not degraded as normal Kalman filter in high acceleration movements because the system noise is estimated. Also an initialization structure of the filter is desisted in consideration for irregular output condition of navigation data by least squared method such as reacquisition status in GPS receiver. The filter performance is verified by GPS simulator which has the simulation capability of high velocity and acceleration. Finally, a vehicle test including DGPS is executed to conform the real improvement of that filter performance. This filter can be applied to various data measurement systems to improve accuracy in high dynamic conditions besides GPS receiver.

• Journal of Auto-vehicle Safety Association
• /
• v.11 no.2
• /
• pp.17-22
• /
• 2019

This paper describes the tracking algorithm performance evaluation for autonomous vehicle using a safety envelope based path. As the level of autonomous vehicle technologies evolves along with the development of relevant supporting modules including sensors, more advanced methodologies for path generation and tracking are needed. A safety envelope zone, designated as the obstacle free regions between the roadway edges, would be introduced and refined for further application with more detailed specifications. In this paper, the performance of the path tracking algorithm based on the generated path would be evaluated under safety envelop environment. In this process, static obstacle map for safety envelope was created using Lidar based vehicle information such as current vehicle location, speed and yaw rate that were collected under various driving setups at Seoul National University roadways. A level of safety was evaluated through CarSim simulation based on paths generated with two different references: a safety envelope based path and a GPS data based one. A better performance was observed for tracking with the safety envelop based path than that with the GPS based one.

• Journal of Institute of Control, Robotics and Systems
• /
• v.5 no.1
• /
• pp.62-68
• /
• 1999

The attitude of a vehicle can be precisely determined using GPS carrier phase measurements from more than two antennas attached to a vehicle and an efficient integer ambiguity resolution technique. Many methods utilizing the known baseline length as a constraint of independent elements of integer ambiguities are proposed to resolve integer ambiguity at real time. Three-dimensional search space is reduced to two-dimensional search space with this constraint. Thus the true integer ambiguity can be easily determined with less computational burden and fewer number of measurements. But there are still strong requirements for the real time integer ambiguity resolution, which uses single epoch measurement of long baseline. In this paper, a new constraint from the geometry of multiple baselines is derived. With this new constraint, two-dimensional search space is further reduced to one-dimensional search space. It makes possible to determine integer ambiguity with single epoch measurement. The proposed method is applied to real data to show its effectiveness.

• Journal of Ocean Engineering and Technology
• /
• v.34 no.6
• /
• pp.475-480
• /
• 2020

Underwater operating platforms face difficulties regarding power supply and communications. To overcome these difficulties, this study proposes a hybrid surface and underwater vehicle (HSUV) and presents the development of the platform, control algorithms, and results of field tests. The HSUV is capable of supplying reliable power to the unmanned underwater vehicle (UUV) and obtaining data in real time by using a tether cable between the UUV and the unmanned surface vehicle (USV). The HSUV uses global positioning system (GPS) and ultra-short base line sensors to determine the relative location of the UUV. Way point (WP) and dynamic positioning (DP) algorithms were developed to enable the HSUV to perform unmanned exploration. After reaching the target point using the WP algorithm, the DP algorithm enables USV to maintain position while withstanding environmental disturbances. To ensure the navigation performance at sea, performance tests of GPS, attitude/heading reference system, and side scan sonar were conducted. Based on these results, manual operation, WP, and DP tests were conducted at sea. WP and DP test results and side scan sonar images during the sea trials are presented.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.6 no.8
• /
• pp.1175-1180
• /
• 2002

In this paper, we implemented the sign board that is able to display the located based information by adding the GPS module to the board that display the DARC information and user`s message. The global positioning information from GPS module gets more correct by DGPS from DARC module. This information help this system select the located based information for broadcasting. From the experiment, we confirmed that this system displayed user`s data, DARC information data and located based information.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.10 no.6
• /
• pp.15-23
• /
• 2011

Driving directly in front of the driver of a vehicle driving in front of the vehicle and it is commonly known is affected. Responding to the car in front of the driver and the vehicle in front, and these follow the model is known as Three-Car-Following Model. Platoon vehicles to follow behind the driver's visibility is affected by the a tinted vehicle, and Parameters of the model is estimated to be affected also. In this study, in Three-Car-Followng Model parameters were estimated. and the parameter values differ about whether and how analysis was performed by the level of Visible Light Transmission Percentage. RTK GPS receiving data through field experiment analyzed based on sensitivity of three car by Visible Light Transmission Percentage and ${\gamma}$. And With statistical verification of driving directly in front of the driver in front of the vehicle and that the moving vehicle is influenced also confirmed. Also Visible Light Transmission Percentage is lowered, the vehicle in front of the driver's behavior showed sensitive reactions. In the further need to research for influence analysis of traffic flow capacity by the level of VLT.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.3 no.3
• /
• pp.126-135
• /
• 2008

The development of an unmanned vehicle basically requires the robust and reliable performance of major functions which include global localization, lane detection, obstacle avoidance, path planning, etc. The implementation of major functional subsystems are possible by integrating and fusing data acquired from various sensory systems such as GPS, vision, ultrasonic sensor, encoder, and electric compass. This paper focuses on implementing the functional subsystems, which are designed and developed by a graphical programming tool, NI LabVIEW, and also verifying the autonomous navigation and remote control of the unmanned vehicle.

• The Journal of the Korea Contents Association
• /
• v.7 no.6
• /
• pp.9-21
• /
• 2007

In this paper, the hybrid methods are suggested, which use the direction angle information to present running trajectory and track the past locations through a small amount of vehicle's location information. In order to prove the effectiveness of the new technique suggested here, vehicle's location information are collected by running the vehicles moving objects under various conditions. Using the location informations and direction angle information collected with time intervals, the vehicl e's location information is abstracted, compared and analyzed. and I have proved that the suggested techniques are more effective by comparing them with others in various methods such as GPS TrackMaker, difference image techniques, consistency comparison, quantity comparison, vehicle's running distances and so on.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.25 no.4
• /
• pp.355-363
• /
• 2007

The purpose of this study is to maximize the use of framework data by a method for updating road framework data using a economical, rapid, and accurate Vehicle-based kinematic survey to get the latest road data among "transportation framework data" which was built in 2003. We collected data using a Vehicle-based kinematic survey with DGPS (Differential Global Positioning System) in Daejeon and Pyeongtaek city and verified the accuracy of line and point features between surveying and previous results. The result showed that Daejeon city which is located near GPS CORS (Continuously Operating Reference Station)s and receive a signal well had lower errors than 1/5,000 digital base map, and Pyeongtaek city which is located far from the stations and receive a signal badly had errors beyond the limits. The study showed that postprocessing method or Total Station surveying should be used where signals cannot be detected well after analyzing a receiving rate from GPS CORSs, the stations of other organizations should be shared, and further studies are needed.