• 대한의용생체공학회:의공학회지
• /
• 제5권2호
• /
• pp.121-126
• /
• 1984

A new approach to texture classification for quantitative ultrasound liver diagnosis using run difference matrix was developed. The run difference matrix comprised the gray level difference along with a distances. From this run difference matrix, we defined several vectors and parameters such as DOD, DGD, DAD vector, SHP, SMO, SMG, LDE, LDEL etc.Each parameter values calculated in fatty, cirrhotic, normal and chronic hepatitic liver images were plotted in a plane and we found that RDM method was more sensitive to small structural changes than the conventional run length method and showed improved classification ability between the diseases.

• Journal of Advanced Marine Engineering and Technology
• /
• 제36권8호
• /
• pp.1129-1135
• /
• 2012

NMF를 이용하여 음악을 전사할 때 표적음악에서 특징행렬과 가중치 행렬을 동시에 추출해 내는 방법을 이용하기 위해서는 특징행렬의 크기(특징벡터의 수)를 미리 알아야 할 뿐 아니라, 추출된 각각의 특징벡터들의 음고를 결정하는 어려운 과정을 거쳐야한다. 또 이 방법은 음악에 포함된 음고의 수가 커질수록 특징행렬을 정확하게 추출해 내기 어려워진다는 단점도 있다. 본 연구에서는 이러한 단점을 피하기 위해 특징행렬 데이터베이스를 미리 준비한 다음 이를 실제 음악에 이용하는 방법을 실험한다. 먼저 특징행렬 데이터베이스를 만든 다음, 특징행렬을 추출한 피아노에서 연주된 음악, 그리고 제 3의 피아노에서 연주된 같은 음악을 각각 전사하여 성능을 비교한다. 또 이들 결과와 비교하기 위하여 특징행렬과 가중치행렬을 동시에 추출하는 방법도 실험하여 결과를 비교하였다. 특징행렬 데이터베이스를 이용하는 방법이 특징행렬과 가중치행렬을 동시에 추출하는 방법보다 좋은 성능을 가짐을 확인하였다.

• 한국음향학회지
• /
• 제39권5호
• /
• pp.490-496
• /
• 2020

본 논문에서는 잡음 환경에서 다채널 위너 필터의 성능을 향상시키기 위한 방법을 제안한다. 부공간(subspace) 기반의 다채널 위너 필터를 설계하는 경우, 목적 신호가 단일 음원인 경우는 음성 상관 행렬의 주성분 부공간에서 음성 성분을 추정할 수 있다. 이 때, 음성 상관 행렬은 음성과 간섭 잡음의 교차 상관도가 음성 상관 행렬에 비해 무시할만한 수준이라는 가정하에 신호 상관 행렬에서 간섭 잡음의 상관 행렬을 차감하여 추정하게 된다. 그러나 간섭 잡음 수준이 높아지게 되면 이러한 가정이 더 이상 유효하지 않게 되며 이에 따라 주성분 부공간 추정 오차도 증가하게 된다. 본 연구에서는 음성 존재 확률과 목적 신호의 방향 벡터를 이용하여 주성분 부공간을 보정하는 방법을 제안한다. 주성분 부공간에서 다채널 음성 존재 확률을 유도하고 주성분 부공간 벡터를 보정하는데 적용하였다. 실험을 통해 제안하는 방법이 잡음 환경에서 다채널 위너 필터의 성능을 향상시키는 것을 확인할 수 있다.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2005년도 전력전자학술대회 논문집
• /
• pp.638-642
• /
• 2005

This paper proposes a modified space-vector pulse width modulation (PWM) strategy which can restrict the common-mode voltage for three-phase to three-phase matrix converter and still keep sinusoidal input and output waveforms and unity power factor at the input side. The proposed control method has been developed based on contributing the appropriate space vectors instead of using zero space vectors. The advantages of this proposed method is to reduce the peak value of common-mode voltage to 42% beside the lower high harmonic components as compared to the conventional SVM method. Hence, the new table is also presented with the new space vector rearrangement. Furthermore, the voltage transfer ratio is unaffected by the proposed method. A simulation of the overall system has been carried out to validate the advantages of the proposed method.

• Journal of Power Electronics
• /
• 제16권3호
• /
• pp.936-945
• /
• 2016

Large magnitude common-mode voltage (CMV) and its variation dv/dt have an adverse effect on motor drives that leads to early winding failure and bearing deterioration. For matrix converters, the switch states that connect each output line to a different input phase result in the lowest CMV among all of the valid switch states. To reduce the output CMV for matrix converters, this paper presents a new space vector modulation (SVM) strategy by utilizing these switch states. By this mean, the peak value and the root mean square of the CMV are dramatically decreased. In comparison with the conventional SVM methods this strategy has a similar computation overhead. Experiment results are shown to validate the effectiveness of the proposed modulation method.

• Journal of the Optical Society of Korea
• /
• 제18권6호
• /
• pp.746-752
• /
• 2014

In a multi-camera measurement system, the determination of the external parameters is one of the vital tasks, referred to as the calibration of the system. In this paper, a new geometrical calibration method, which is based on the theory of the vanishing line, is proposed. Using a planar target with three equally spaced parallel lines, the normal vector of the target plane can be confirmed easily in every camera coordinate system of the measurement system. By moving the target into more than two different positions, the rotation matrix can be determined from related theory, i.e., the expression of the same vector in different coordinate systems. Moreover, the translation matrix can be derived from the known distance between the adjacent parallel lines. In this paper, the main factors effecting the calibration are analyzed. Simulations show that the proposed method achieves robustness and accuracy. Experimental results show that the calibration can reach 1.25 mm with the range about 0.5m. Furthermore, this calibration method also can be used for auto-calibration of the multi-camera mefasurement system as the feature of parallels exists widely.

• Journal of the Korean Data and Information Science Society
• /
• 제26권6호
• /
• pp.1557-1563
• /
• 2015

Multiclass classification is typically performed using the voting scheme method based on combining binary classifications. In this paper we propose multiclass classification method for large data, which can be regarded as the revised one-vs-all method. The multiclass classification is performed by using the hat matrix of least squares support vector machine (LS-SVM) ensemble, which is obtained by aggregating individual LS-SVM trained on each subset of whole large data. The cross validation function is defined to select the optimal values of hyperparameters which affect the performance of multiclass LS-SVM proposed. We obtain the generalized cross validation function to reduce computational burden of cross validation function. Experimental results are then presented which indicate the performance of the proposed method.

• Journal of the Korean Data and Information Science Society
• /
• 제14권3호
• /
• pp.451-459
• /
• 2003

The present paper suggests a method to estimate confidence interval using SV(Support Vector) in LS-SVM(Least-Squares Support Vector Machine). To get the proposed method we used the fact that the values of the hessian matrix obtained by full data set and SV are not different significantly. Since the suggested method implement only SV, a part of full data, we can save computing time and memory space. Through simulation study we justified the proposed method.

• Journal of Power Electronics
• /
• 제19권6호
• /
• pp.1380-1392
• /
• 2019

Input filters are very important to matrix converters (MCs). They are used to improve grid side current waveform quality and to reduce the input voltage distortion supplied to the grid side. Due to the effects of the input filter and the output power, the grid side power factor (PF) is not at unity when the input power factor angle is zero. In this paper, the displacement angle between the grid side phase current and the phase voltage affected by the input filter parameters and output power is analyzed. Based on this, a new grid side PF unity compensation method implemented in the indirect space vector pulse width modulation (ISVPWM) method is presented, which has a larger compensation angle than the traditional compensation method, showing a higher grid side PF at unity in a wide output power range. Simulation and experimental results verify that the analysis of the displacement angle between the grid side phase current and the phase voltage affected by the input filter and output power is right and that the proposed compensation method has a better grid side PF at unity.

• 한국공작기계학회논문집
• /
• 제10권1호
• /
• pp.16-22
• /
• 2001

In this study for reduction degree of freedom of dynamic model, a mixed method to combined finite element method and transfer matrix method is presented. This offers the advantages of an automatic reduction in the size of the eigenvalues problem and of a straightforward means of dynamic substructuring. The analytical procedure in this method for dynamic analysis of 3-dimensional cantilevered box beam are described. the result of numerical example is shown to demonstate the efficiency and accuracy of this method. The result form this example agree well those obtained by ANSYS, By using this technique, the number of nodes required in the regular finite element method is reduced and therefore a smaller com-puter can be used.