• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.61 no.11
• /
• pp.1601-1605
• /
• 2012

Three-phase voltage and current is applied to the three-phase alternating current motors which are commonly used in industry. Three phase variables of a, b, c are converted into d, q, 0 axis and the AC machines are modeled and analyzed. Basically the coordinate transformation or d-q transformation is used for convenience, a few steps are needed to analyze the motor performances - separating d and q components, establishing each equivalent circuit, and solving the differential equations of the circuits. In this study, a modeling technique of induction motor using complex vector is proposed and it can explain the induction motor physically. This method does not need the separating process of d and q components. With this technique, the model becomes simple, is easy to understand in physical, and can get the same results with those from the other models. These simulation results of the proposed model are compared with them for the conformation of the proposed method.

• Journal of Power Electronics
• /
• v.12 no.3
• /
• pp.477-486
• /
• 2012

This paper proposes a novel current control scheme for vector-controlled induction machine (IM) drives in the overmodulation (OVM) range, with which the voltage utilization of the voltage-source inverter (VSI) can be maximized. In the OVM region, the original voltage reference is modified by changing its magnitude and angle, which causes the motor current to be distorted, resulting in a deterioration of the current control performance. To meet with this situation, the harmonic components in the feedback currents should be eliminated before being input to the PI current controllers. For this, a composite observer is applied to extract the fundamental and harmonic components from the distorted currents, which gives a good performance without a delay and the effect of a fundamental frequency variation. In addition, through a detailed analysis of the response of the PI current controllers in the OVM range, the effectiveness of using the composite observer is demonstrated. Simulation and experimental results for a 3-kW induction motor drive are shown to verify the validity of the proposed method.

• The KIPS Transactions:PartB
• /
• v.15B no.4
• /
• pp.285-292
• /
• 2008

Color histograms have been used as feature vectors to characterize the color features of given images, but they have a limitation in efficiency by generating high-dimensional feature vectors. In this paper, we present a method to reduce the dimension of the feature vectors by applying PCA (principal components analysis) to the color histogram of a given vehicle image. With SVM (support vector machine) method, the dimension-reduced feature vectors are used to recognize the colors of vehicles. After reducing the dimension of the feature vector by a factor of 32, the successful recognition rate is reduced only 1.42% compared to the case when we use original feature vectors. Moreover, the computation time for the color recognition is reduced by a factor of 31, so we could recognize the colors efficiently.

• Structural Engineering and Mechanics
• /
• v.72 no.1
• /
• pp.31-41
• /
• 2019

Structural integrity assessment of piping components is of paramount important for remaining life prediction, residual strength evaluation and for in-service inspection planning. For accurate prediction of these, a reliable fracture parameter is essential. One of the fracture parameters is stress intensity factor (SIF), which is generally preferred for high strength materials, can be evaluated by using linear elastic fracture mechanics principles. To employ available analytical and numerical procedures for fracture analysis of piping components, it takes considerable amount of time and effort. In view of this, an alternative approach to analytical and finite element analysis, a model based on relevance vector machine (RVM) is developed to predict SIF of part through crack of a piping component under fatigue loading. RVM is based on probabilistic approach and regression and it is established based on Bayesian formulation of a linear model with an appropriate prior that results in a sparse representation. Model for SIF prediction is developed by using MATLAB software wherein 70% of the data has been used for the development of RVM model and rest of the data is used for validation. The predicted SIF is found to be in good agreement with the corresponding analytical solution, and can be used for damage tolerant analysis of structural components.

• The Korean Journal of Applied Statistics
• /
• v.24 no.6
• /
• pp.995-1006
• /
• 2011

A time series can be decomposed into simple components with a multiscale method. Empirical mode decomposition(EMD) is a recently invented multiscale method in Huang et al. (1998). It is natural to apply a classical prediction method such a vector autoregressive(AR) model to the obtained simple components instead of the original time series; in addition, a prediction procedure combining a classical prediction model to EMD and Hilbert spectrum is proposed in Kim et al. (2008). In this paper, we suggest to adopt principal component analysis(PCA) to the prediction procedure that enables the efficient selection of input variables among obtained components by EMD. We discuss the utility of adopting PCA in the prediction procedure based on EMD and Hilbert spectrum and analyze the daily worm account data by the proposed PCA adopted prediction method.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2005.05a
• /
• pp.435-440
• /
• 2005

This study describes a new method of constructing Reconfigurable machine tools configurations from a set of modules or components. This proposed method defines combinability vector for each module and mutual combinability coefficient matrix for adjacent two modules. All of machine configurations possible to be generated from any two adjacent modules can be determined by quadratic form of two associated combinability vectors. Furthermore, all of possible RMT configurations generating from a series of multiple modules also can be obtained by multiplying quadratic form of two adjacent conbinability vectors recursively. Our proposed RMT configuration generating method can be successfully applied to determining all of possible machine configurations from several modules or components at conceptual- or preliminary- design stage.

• Communications of the Korean Mathematical Society
• /
• v.16 no.1
• /
• pp.125-135
• /
• 2001

In this article we investigate the dependence between components of the random vector which is given as an asymptotic limit of an array of random vectors with interlaced mixing conditions. We discuss the cross covariance of the limiting vector process and give a stronger condition to have a central limit theorem for an array of random vectors with mixing conditions.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2015.05a
• /
• pp.475-478
• /
• 2015

The objective of this study is to apply a hybrid model for estimating solar radiation and investigate their accuracy. A hybrid model is wavelet-based support vector machines (WSVMs). Wavelet decomposition is employed to decompose the solar radiation time series into approximation and detail components. These decomposed time series are then used as inputs of support vector machines (SVMs) modules in the WSVMs model. Results obtained indicate that WSVMs can successfully be used for the estimation of daily global solar radiation at Champaign and Springfield stations in Illinois.

• Journal of Microbiology and Biotechnology
• /
• v.8 no.5
• /
• pp.509-516
• /
• 1998

A plasmid vector, pXGPRMATG-lac-Tgx, was developed for overproduction of $\beta$-galactosidase in Escherichia coli using the genetic components of groEx, a heat-shock gene cloned from symbiotic X-bacteria in Amoeba proteus. The vector is composed of intragenic promoters P3 and P4 of groEx, the structural gene of lac operon, transcription tenninator signals of lac and groEx, and ColEl and amp'of pBluescript SKII. The optimized host, E. coli DH5$\alpha$, transfonned with the vector constitutively produced 117,310-171,961 Miller units of $\beta$-galactosidase per mg protein in crude extract. The amount of enzyme in crude extract was 53% of total water-soluble proteins. About 43% of the enzyme could be purified to a specific activity of 322,249 Miller units/mg protein after two-fold purification, using two cycles of precipitation with ammonium sulfate and one step of gel filtration. Thus, the expression system developed in this study presents a low-cost and simple method for purifying overproduced $\beta$-galactosidase in E. coli.

• The Transactions of the Korea Information Processing Society
• /
• v.7 no.12
• /
• pp.3986-3994
• /
• 2000

A multiple vector reductive processing occurs during the vector inner product operation ([C] = [A] $\bigodot$,$\square$ [B]) and proceeds at the hardware dyadic pipeline unit. Every scalar result has to be generated with the component merging delay time in the multiple vector reduction($\bigodot$). In this paper we propose a new design method by which the component merging time could be eliminated from the multiple reduction and the scalar results from the reduction($\bigodot$) could be generated nearly in the almost same condensed time as the input components are fel>ded in the dyadic pipeline unitlo) or the output components are drained out of the dyadic pipeline unit($\square$), so called a dedicated chained pipeline unit for only a inner product operation.