• Title/Summary/Keyword: varying thickness

Search Result 763, Processing Time 0.064 seconds

Adhesion Properties of UV-curable Acrylic PSA Tape for Automotive Sidemolding and Emblem (자동차용 사이드 몰딩과 엠블럼 적용을 위한 UV 경화형 아크릴 점착 테이프의 점착물성)

  • Park, Ji-Won;Lee, Seung-Woo;Kim, Hyun-Joong;Won, Dong-Bok;Kim, Dong-Bok;Lee, Kang-Shin;Woo, Hang-Soo;Kim, Eun-Ah
    • Journal of Adhesion and Interface
    • /
    • v.12 no.3
    • /
    • pp.81-87
    • /
    • 2011
  • In this study, UV curing and crosslinking process was introduced for synthesis of acrylic foam tape that can be applied to the the automotive assembly process. Polymerized adhesive are laminated to baseform and varying the thickness of specimens were prepared. To measure basic mechanical properties, stainless steel was used. And in the test peel, dynamic shear and t-block were used. The acrylform adhesive show better results compare with typical adhesive and the properties depand on external factors - thick, wetting time -. To analysis functions of acrylic foam adhesive used to automobile production, evaluate the adhesive properties on the various plastic substrate. In PP and PE are categorized low surface energy materials, their properties have not been expressed. But dynamic shear tests show that some properties could be expressed by the difference break mechanism.

Colorimetric Analysis of Preformed Zirconia Anterior Crowns for Esthetic Restoration (심미수복용 기성 지르코니아 크라운의 색조 평가)

  • Lee, Changkeun;Park, Kibong;Yang, Yeonmi;Lee, Daewoo;Kim, Jaegon
    • Journal of the korean academy of Pediatric Dentistry
    • /
    • v.46 no.3
    • /
    • pp.318-327
    • /
    • 2019
  • The purpose of this study was to identify which combination of zirconia crowns and cements is most similar in color to the maxillary primary incisors by varying the color of zirconia crowns, crown thickness, and shade of cements. Prefabricated zirconia crowns in 3 shades and crowns fabricated using 6 types of zirconia blocks were used in this study. These were filled with A2-shade or translucent-shade resin cement and the $L^*$, $a^*$, and $b^*$ values were calculated using a spectrophotometer. The color differences between the natural teeth and the zirconia crowns were assessed. The shade of the final restoration was more similar to that of the natural teeth using A2-shade than translucent-shade resin cement. Application of A2-shade cement to a 0.5-mm-thick crown fabricated from a smile series 2 zirconia block resulted in the color most similar to that of the natural teeth. A2-shade resin cement is recommended for zirconia crown restoration in anterior primary teeth compared to TR-shade resin cement for more esthetic restoration. Since restorations with Nu-smile zirconia crowns were not esthetically favorable in terms of shade, improvement of the shade characteristics of the product or development of a new kind of zirconia crown is required.

Analysis of Composite Microporosity according to Autoclave Vacuum Bag Processing Conditions (오토클레이브 진공포장법의 공정 조건에 따른 복합재의 미세기공률 분석)

  • Yoon, Hyun-Sung;An, Woo-Jin;Kim, Man-Sung;Hong, Sung-Jin;Song, Min-Hwan;Choi, Jin-Ho
    • Composites Research
    • /
    • v.32 no.5
    • /
    • pp.199-205
    • /
    • 2019
  • The composite material has the advantage that the fibers can be arranged in a desired direction and can be manufactured in one piece. However, micro voids can be formed due to micro air, moisture or improper curing temperature or pressure, which may cause the deterioration in mechanical strength. In this paper, the composite panels with different thicknesses were made by varying the curing pressure in an autoclave vacuum bag process and their microporosities were evaluated. Microporosity was measured by image analysis method, acid digestion method, and combustion method and their correlation with ultrasonic attenuation coefficient was analyzed. From the test results, it was found that the acid digestion method had the highest accuracy and the lower the curing pressure, the higher the microporosity and the ultrasonic attenuation coefficient. In addition, the microporosity and the ultrasonic attenuation coefficient were increased as the thickness of the composite panel was increased at the same curing pressure.

Carbon-nanotube-based Spacer Fabric Pressure Sensors for Biological Signal Monitoring and the Evaluation of Sensing Capabilities (생체신호 모니터링을 위한 CNT 기반 스페이서 직물 압력센서 구현 및 센싱 능력 평가)

  • Yun, Ha-yeong;Kim, Sang-Un;Kim, Joo-Yong
    • Science of Emotion and Sensibility
    • /
    • v.24 no.2
    • /
    • pp.65-74
    • /
    • 2021
  • With recent innovations in the ICT industry, the demand for wearable sensing devices to recognize and respond to biological signals has increased. In this study, a three-dimensional (3D) spacer fabric was embedded in a single-wall carbon nanotube (SWCNT) dispersive solution through a simple penetration process to develop a monolayer piezoresistive pressure sensor. To induce electrical conductivity in the 3D spacer fabric, samples were immersed in the SWCNT dispersive solution and dried. To determine the electrical properties of the impregnated specimen, a universal testing machine and multimeter were used to measure the resistance of the pressure change. Moreover, to examine the changes in the electrical properties of the sensor, its performance was evaluated by varying the concentration, number of penetrations, and thickness of the specimen. Samples that penetrated twice in the SWCNT distributed solution of 0.1 wt% showed the best performance as sensors. The 7-mm thick sensors showed the highest GF, and the 13-mm thick sensors showed the widest operating range. This study confirms the effectiveness of the simple process of fabricating smart textile sensors comprising 3D spacer fabrics and the excellent performance of the sensors.

Effects of Functional Improvement of Multiaxis Flat Continuous Soil Cement Earth Retaining Wall (다축 평면 연속형 SCW 흙막이 벽체의 개선 효과)

  • Chung, Choong-Sub;Yoo, Chan Ho;Nam, Ho Seong;Choi, In Gyu;Baek, Seung Cheol
    • Journal of the Korean Geotechnical Society
    • /
    • v.39 no.11
    • /
    • pp.7-22
    • /
    • 2023
  • In January 2022, a new legislation was enforced to enhance the safety of underground construction. Consequently, a comprehensive assessment of underground safety is now an integral part of the planning process, including an evaluation of its impact. Ensuring the stability of temporary retaining walls during underground excavation has become paramount, prompting a heightened focus on the assessment of underground safety. This study delves into the analysis of the Multi-axis Flat Continuous Soil Cement Wall retaining wall (MFS) construction method. This method facilitates the expansion of wall thickness in the ground and provides flexibility in selecting and spacing H-piles. Through laboratory model tests, we scrutinized the load-displacement behavior of the wall, varying the H-pile installation intervals using the MFS method. Additionally, a 3-dimensional numerical analysis was conducted to explore the influence of H-pile installation intervals and sizes on the load for different thicknesses of the MFS retaining wall. The displacement analysis yielded the calculation of the height of the arching effect acting on the wall. To further our understanding, a design method was introduced, quantitatively analyzing the results of axial force and shear force acting on the wall. This involved applying the maximum arching height, calculated by the MFS method, to the existing member force review method. The axial force and shear force, contingent on the H-pile installation interval and size applied to the MFS retaining wall, demonstrated a reduction effect ranging from 24.6% to 62.9%.

Reliability of Skeletal Muscle Area Measurement on CT with Different Parameters: A Phantom Study

  • Dong Wook Kim;Jiyeon Ha;Yousun Ko;Kyung Won Kim;Taeyong Park;Jeongjin Lee;Myung-Won You;Kwon-Ha Yoon;Ji Yong Park;Young Jin Kee;Hong-Kyu Kim
    • Korean Journal of Radiology
    • /
    • v.22 no.4
    • /
    • pp.624-633
    • /
    • 2021
  • Objective: To evaluate the reliability of CT measurements of muscle quantity and quality using variable CT parameters. Materials and Methods: A phantom, simulating the L2-4 vertebral levels, was used for this study. CT images were repeatedly acquired with modulation of tube voltage, tube current, slice thickness, and the image reconstruction algorithm. Reference standard muscle compartments were obtained from the reference maps of the phantom. Cross-sectional area based on the Hounsfield unit (HU) thresholds of muscle and its components, and the mean density of the reference standard muscle compartment, were used to measure the muscle quantity and quality using different CT protocols. Signal-to-noise ratios (SNRs) were calculated in the images acquired with different settings. Results: The skeletal muscle area (threshold, -29 to 150 HU) was constant, regardless of the protocol, occupying at least 91.7% of the reference standard muscle compartment. Conversely, normal attenuation muscle area (30-150 HU) was not constant in the different protocols, varying between 59.7% and 81.7% of the reference standard muscle compartment. The mean density was lower than the target density stated by the manufacturer (45 HU) in all cases (range, 39.0-44.9 HU). The SNR decreased with low tube voltage, low tube current, and in sections with thin slices, whereas it increased when the iterative reconstruction algorithm was used. Conclusion: Measurement of muscle quantity using HU threshold was reliable, regardless of the CT protocol used. Conversely, the measurement of muscle quality using the mean density and narrow HU thresholds were inconsistent and inaccurate across different CT protocols. Therefore, further studies are warranted in future to determine the optimal CT protocols for reliable measurements of muscle quality.

Experimental and analytical study of squat walls with alternative detailing

  • Leonardo M. Massone;Cristhofer N. Letelier;Cristobal F. Soto;Felipe A. Yanez;Fabian R. Rojas
    • Computers and Concrete
    • /
    • v.33 no.5
    • /
    • pp.497-507
    • /
    • 2024
  • In squat reinforced concrete walls, the displacement capacity for lateral deformation is low and the ability to resist the axial load can quickly be lost, generating collapse. This work consists of testing two squat reinforced concrete walls. One of the specimens is built with conventional detailing of reinforced concrete walls, while the second specimen is built applying an alternative design, including stirrups along the diagonal of the wall to improve its ductility. This solution differs from the detailing of beams or coupling elements that suggest building elements equivalent to columns located diagonally in the element. The dimensions of both specimens correspond to a wall with a low aspect ratio (1:1), where the height and length of the specimen are 1.4 m, with a thickness of 120 mm. The alternative wall included stirrups placed diagonally covering approximately 25% of the diagonal strut of the wall with alternative detailing. The walls were tested under a constant axial load of 0.1f'cAg and a cyclic lateral displacement was applied in the upper part of the wall. The results indicate that the lateral strength is almost identical between both specimens. On the other hand, the lateral displacement capacity increased by 25% with the alternative detailing, but it was also able to maintain the 3 complete hysteretic cycles up to a drift of 2.5%, reaching longitudinal reinforcement fracture, while the base specimen only reached the first cycle of 2% with rapid degradation due to failure of the diagonal compression strut. The alternative design also allows 46% more energy dissipation than the conventional design. A model was used to capture the global response, correctly representing the observed behavior. A parametric study with the model, varying the reinforcement amount and aspect ratio, was performed, indicating that the effectiveness of the alternative detailing can double de drift capacity for the case with a low aspect ratio (1.1) and a large longitudinal steel amount (1% in the web, 5% in the boundary), which decreases with lower amounts of longitudinal reinforcement and with the increment of aspect ratio, indicating that the alternative detailing approach is reasonable for walls with an aspect ratio up to 2, especially if the amount of longitudinal reinforcement is high.

Effects of Varying Levels of Dietary Metabolizable Energy and Crude Protein on Performance and Egg Quality of Organic Laying Hens (유기 산란계 에너지.단백질 수준이 산란 생산성 및 계란 품질에 미치는 영향)

  • Yu, Dong-Jo;Na, Jae-Cheon;Choi, Hee-Chul;Bang, Han-Tae;Kim, Sang-Ho;Kang, Geun-Ho;Kang, Hwan-Ku;Suh, Ok-Suk
    • Korean Journal of Poultry Science
    • /
    • v.35 no.4
    • /
    • pp.367-373
    • /
    • 2009
  • This experiment was conducted to determine optimum dietary levels of dietary energy and protein for laying performance and egg quality in organic laying hens. In a $2{\times}3$ factorial arrangement, 360 Hy-Line pullets (21 wk of age) were randomly assigned to experimental diets with 2,800, 3,080, and 3,360 kcal of ME/kg of diet, each containing 16 and 18% CP, respectively. Each dietary treatment was replicated 4 times, and feed and water were provided ad libitum. Experimental birds were raised in floor and received 14h of light throughout 52 weeks of experimental period. The birds were observed for feed consumption, egg production, egg weight, egg mass, feed conversion ratio, Haugh unit, shell thickness, and shell color at 30, 50, and 70 wk of age. Egg production, egg weight, and egg mass were higher (P<0.05) in hens receiving diets with 2,800 kcal/kg of ME/kg of feed than those fed diets containing 3,080 and 3,360 kcal of ME/kg of diets. Eggshell breaking strengths were not significantly different among the dietary ME and CP concentrations. Eggshell thickness was higher (P<0.05) in hens receiving diets with 3,360 kcal of ME/kg of feed than those fed diets containing 2,800 and 3,080 kcal of ME/kg of diets at 50 and 70 week. With increasing in dietary energy levels, the concentrations of blood total cholesterol were also significantly increased. Overall, the laying hens fed organic diet of 2,800 kcal ME/kg and 16% CP showed superior egg production than those of other dietary regimens.

A study for detection of melt flow zone about polyethylene butt fusion joints (폴리에틸렌 배관 버트융착부 열용융거리 측정에 대한 연구)

  • Kil, Seonghee;Kim, Younggu;Jo, NYoungdo;Lee, Yeonjae
    • Journal of Energy Engineering
    • /
    • v.25 no.4
    • /
    • pp.103-109
    • /
    • 2016
  • Polyethylene pipes has useful benefits which are anti-corrosive and flexible material, so it is used to gas pipes but also class 3 water pipes of nuclear power plant, process pipes of petrochemical plant and chemical plant. So the usage of polyethylene pipes is widely increased. But it has been limited for the usage of polyethylene, because it can not be directly detected to fusion joints by using non destructive evaluation. Polyethylene pipes are connected by two methods, one is butt fusion and the other is electrofusion. Butt fusion is widely used to connecting the pipes. It is proposed to method for determining the reliability of joints in this study that is detection of the melt flow zone at fusion joints. In this study, middle density polyethylene is used, outside diameter of the test specimen is 225mm and thickness is 20.5mm. Speed of ultrasonic of this test specimen is 2,200m/s. Test specimens were fabricated by varying the heating time which means from 0% to 130% applying time through heating plate to polyethylene for detecting melt flow zone. Also 4 additional test specimens were made, one was made that not scrapping attached surface of pipes but applying 100% of the proper heating time and the others were made to include of soil, gravel and vinly tape paper at fusion joints, that were also applied 100% of proper heating time. Ultrasonic testing to measure the melt flow zone of 20 test specimens was conducted by using 3.5MHz and 5.0MHz ultrasonic probes and melt flow zone measuring was conducted to three times at different point to one specimen. To differentiate the melt flow zone signal, post image processing was equally conducted to all test results and image levels, contrast, sharpen, threshold were adopted to all teat results and the test results were displayed gray scale. From the results, for the shorter heating times the reflection area of multiple echo have been increased, so the data was obtained from the position where it can be eliminated as much as possible. At 80% of proper heating time(168 sec.), the signal of melt flow zone was obtained clearly, so measuring could be conducted. From 7% of proper heating time(15 sec.) to shorter heating times. we could not obtain the signal because test specimen was not fused. From the result, we can verify that measuring of melt flow zone by using phased array ultrasonic imaging method is possible. And we can verify to complete and incomplete butt fusion by measuring the melt flow zone.

The Influence of Food Habits on Body Stature of Children (어린이의 식습관(食習慣)이 체위(體位)에 미치는 영향(影響)에 관한 연구(硏究))

  • Lee, Mi-Suk;Mo, Su-Mi
    • Journal of Nutrition and Health
    • /
    • v.9 no.1
    • /
    • pp.7-15
    • /
    • 1976
  • The Purpose of this study was to determine every possible correlation between food habits and body statures of primary school children, aged ten years old. This study was conducted from July to October of 1975. In July, prepared questionaires concerning life style, anthropometry, food preference, and food behavior were distributed through school teachers to 425 children; 219 boys and 206 girls, in the 5th grade of three elementary schools in the city of Seoul. Then, in October, when subjects had been classified into underweight/obese by statistical analysis, mothers of obese or underweight children were interviewed by the authors to determine weaning history, daily food consumption of their children, and opinions of various snacks for children. Analysis of results in terms of correlation coefficient, chisquare test and percentage calculations, are as follows: 1. Physical growth and development Boys Girls Height (cm) $134.8{\pm}5.74\;134.4{\pm}5.97$ Weight (kg) $30.0{\pm}4.27\;29.5{\pm}5.16$ Chestgirth (cm) $64.1{\pm}3.59\;63.3{\pm}3.81$ Arm circumference (cm) $18.3{\pm}1.61\;18.2{\pm}1.70$ Triceps skinfold thickness (mm) $10.9{\pm}5.13\;12.7{\pm}4.86$ Various indices of nutrition such as relative weight, relative chestgirth, $R{\ddot{o}}hrer's$ index, Kaup index, Vervaeck index were determined. 2. Food habits 1) Food $preference{\cdots}{\cdots}A$ varying number of foods were selected from 60 items were accepted. It was found that the food which children liked best was fruit and snacks were popular one. Lowest ranking among LIKED foods were from strongly flavored vegetables and organ meat. In general, girls had more food dislikes than did boys. Selected as liked foods were fruits, rice noodle soup, biscuits, and peanuts. Disliked foods were liver, green onions, onions, green pepper, mushrooms, oysters, shellfish, and pork. Items which children never ate before were liver, mushrooms, fish cake, boiled rice mixed with sorghum, mayonnaise, and fresh water firsh. Reasons which children gave for dislike were undesirable flavor and odor. 2) Food $behavior{\cdots}{\cdots}It$ was found that boys liked sweet and salty flavors more than did the girls who more often liked sour flavor. The majority of children enjoyed evening meals more than lunch and breakfast. A number of children skipped breakfast because of lack of appetite or lack of time before going to school. Snacks were the most popular food, especially among girls. Their snacking habits were formed by the encouragement of the mother, and the relieve boredom. Educational backgrounds of mothers and family economical levels of children were remarkable correlated with mothers' attitudes toward feeding of children. There were several interesting findings relating body stature to some other responses; such as that the obese child has a small number of brothers, higher birth order, higher educated mothers and higher family cultural background. It was also discovered that food perference, except for fat and oil group foods was not related to body stature. Sweet taste was liked best and pepperly taste was mostly disliked. Sour taste was popular in the group of underweight. Underweight children were more finicky, disliked snacking, and didn't get much attention from their mothers. 3) Correlation between body stature and nutrition during their infancy. The majority of children, both from obese and underweight, were breast fed as infant. Twenty five per cent of obese children and 17.4 per cent of underwight children started weaning at $1{\sim}6$ months old. The most popular supplemental food of weaning was cereal gruel for the obese group, while boiled white rice and cereal gruel were most common for the underweight group. Highly significant relationships were found between stature of parents and their children. In the obese group 47.8 per cent of fathers and 45.9 per cent of mothers were overweight; however, none of the fathers and only one mother was found to be underweight. In daily food consumption patterns, meals consisting of bread or noodle were popular in the obese group but disliked by the underweight group. The study found clear contrast in that the obese group liked meat and fish while the underweight group liked fruits and vegetables, especially kimchee. The obese children desired to eat cereal foods, milk and milk products, and fat foods while the underweight group desired to eat fruits and vegetables. Frequency of snacks per day was much greater in the obese group. Foods which mothers believed to be good for the health were carrots, cucumbers, fruits, milk, potatoes, sweet potatoes, and breads, while sweet foods such as candies, drinks. chocolate were considered not good for the teeth. Watching television was not significantly related to statures of children. Most significant relationships were found beween frequencies of family guest meals/and eating-out, and children's statures. Nutritional problems which have been considered for the malnourished children in addition to those of children who have a tendency toward obesity, must be taken into consideration in the development of proper nutrition education through the channels of regular school teaching and teaching by parents in the homes. Korean standards of anthropometric measurements for children should be revised, current measurements show much higher figures than present Korean standards.

  • PDF