• 한국지하수토양환경학회:학술대회논문집
• /
• 한국지하수토양환경학회 2004년도 임시총회 및 추계학술발표회
• /
• pp.286-289
• /
• 2004

On site, In situ soil remediation technologies are very important among the remediation technologies and in general efficiency of these technologies are turned to site characterization and environmental condition. specially using of only one technology has so many limitation factors. for example, existing state of tailing and channeling and so on. actually, filled land have high concentration cation exchange capacity because of existence in abundance soil organic matter. Therefore we used various on site in Situ technologies by phase for overcome the limitation factors. Target site is petroleum (diesel) impacted filled land and using technologies are SVE(Soil Vapor Extraction), BV(Bioventing), Bioremediation, Soil flushing, Chemical oxidation.

• 신재생에너지
• /
• 제19권1호
• /
• pp.41-52
• /
• 2023

Various carbon upcycling technologies have been proposed and are under development to achieve Korea's carbon neutrality target. Many chemical reactions are under development through various chemical reaction pathways, and different technological maturity levels are shown for each country and company. In this situation, it is essential to establish investment decisions such as research funds and human resources allocation through technological and economic analysis for close commercialization technologies and basic technologies with low technology readiness levels (TRL). Therefore, in this study, the technology development priority for developing carbon upcycling items was selected according to the domestic Carbon Capture & Utilization (CCU) technology roadmap using the stakeholder selection tool released by EU CarbonNext. As a result of the analysis, the TRL level of Korea's major carbon upcycling technologies was analyzed to be lower than that of other carbon resource technologies, and it was considered desirable to invest in mineral carbonization technologies among various candidate technologies.

• 디지털산업정보학회논문지
• /
• 제18권4호
• /
• pp.41-46
• /
• 2022

In the fourth industrial era, when various technologies are fused and combined, new and advanced technologies from other industries are used extensively in the maritime industry field. New security threats are also increasing along with the development of new technologies. In addition, in incorporating convergence technologies into the maritime industry, various problems, such as communication definitions and procedures between technologies and customer-customized delays, occur. In this paper, for the problems mentioned above, research results on the network configuration of safer autonomous vessels by supplementing and fusing existing solutions rather than developing new technologies are proposed. In conclusion, the entire network consists of VDI and presents additional configurations to ensure confidentiality, integrity, and availability, which are the three security elements. According to the composition of such a convergence network, it is intended to help prepare countermeasures to protect internal data from external threats.

• 한국전자거래학회지
• /
• 제4권3호
• /
• pp.213-234
• /
• 1999

Currently, various international standard organizations, academic institutes, and private organizations are making efforts to improve and expand the traditional EDI. The next generation EDI has potential to impact on the existing and planned EDI systems. Major objective of this study is to systematically analyze and compare various next generation EDI technologies. In order to accomplish the research objective, this paper presented the following three issues. First, overall development trend and types of the next generation EDI were analyzed. Secondly, basic concepts of a few important next generation EDI technologies were presented. Lastly, models to be used to analyze the various next generation EDI technologies were proposed and results of the analyses peformed based on the proposed models were presented.

• 국제학술발표논문집
• /
• The 5th International Conference on Construction Engineering and Project Management
• /
• pp.616-623
• /
• 2013

One of the oldest, most common engineering problems is measuring the dimensions of different objects and the distances between locations. In AEC/FM, related uses vary from large-scale applications such as measuring distances between cities to small-scale applications such as measuring the depth of a crack or the width of a welded joint. Within the last few years, advances in applying new technologies have prompted the development of new measuring devices such as ultrasound and laser-based measurers. Because of wide varieties in type, associated costs, and levels of accuracy, the selection of an optimal measuring technology is challenging for construction engineers and facility managers. To tackle this issue, we present an overview of various measuring technologies adopted by experts in the area of AEC/FM. As the next step, to evaluate the performance of these technologies, we select one indoor and one outdoor case and measure several dimensions using six categories of technologies: tapes, total stations, laser measurers, ultrasound devices, laser scanners, and image-based technologies. Then we evaluate the results according to various metrics such as accuracy, ease of use, operation time, associated costs, compare these results, and recommend optimal technologies for specific applications. The results also revealed that in most applications, computer vision-based technologies outperform traditional devices in terms of ease of use, associated costs, and accuracy.

• 전자통신동향분석
• /
• 제36권4호
• /
• pp.103-109
• /
• 2021

Industrial measurement technologies are essential in the semiconductor and display fields, which are our flagship industries. These technologies are also critical to the future rechargeable battery industry and smart factories. Although existing industrial measurement technologies have been developed primarily for 2D measurement, the demand for 3D measurement technology is increasing gradually in the era of the Fourth Industrial Revolution. In this paper, to understand the trends in industrial measurement technologies, we introduce various industrial measurement fields and representative technologies.

• 융합보안논문지
• /
• 제3권3호
• /
• pp.67-74
• /
• 2003

가정 내의 각종 기기를 유선 또는 무선으로 연결하는 홈 네트워크 (Home Network) 기술과 액세스 네트워크 기술, 그리고 각종 서비스 제공 기술 또한 괄목할만한 성장을 거듭하고 있다. 이러한 홈 네트워킹 기술을 이용하여 가정에 서비스를 제공하기 위해서는 홈 네트워크 환경, 액세스 네트워크 환경, 그리고 다양한 서비스 및 콘텐츠 제공 기술 등이 유기적으로 이루어져야한다. 이러한 기술들 중에서 강력한 인증 및 보안 기능이 요구되는 홈 네트워크에서 체계적이고 효과적인 홈 네트워크의 관리 방법의 정립은 홈 네트워킹 서비스의 안전성과 신뢰성을 제공하기 위한 가장 시급하고도 중요한 요소이다. 본 논문에서는 SNMPv3을 이용한 홈 게이트웨이 보안 관리 체계와 방식을 제안하였다. 또한 다양한 홈 네트워킹 보안 시나리오를 지원하기 위한 홈 네트워크 관리 시스템의 구조와 기능에 대해서도 제안한다.

• 융합경영연구
• /
• 제12권5호
• /
• pp.1-8
• /
• 2024

Purpose: The purpose of this study is to study promotion strategies so that the research results of national strategic technologies can lead to technology commercialization. National strategic technology is being promoted in various fields, but the reality is that review of the commercialization aspect is lacking. In order to lead to commercialization, the strategic goals and direction of the promotion process must be consistent, and a strategic review must be conducted in terms of technology commercialization. Research design, data and methodology: In this study, the direction of strategic technology was analyzed and commercialization problems and solutions were presented based on case studies and existing literature research. Although technology commercialization methods have been discussed, research on specific strategies is lacking. Results: It is necessary to pursue full-cycle technology commercialization to solve various problems for commercialization of cutting-edge science and technology and advance to the commercialization stage. We will cover topics such as understanding successful commercialization of special strategic technology fields, establishing appropriate commercialization strategies, government-wide cooperation, and investment support. Conclusions: Research results showed that discovery of excellent technologies, investment support, and multi-ministerial cooperation support are necessary to commercialize strategic technologies based on cutting-edge science and technology. This study should discuss various promotion strategies for strategic technologies to improve the efficiency of research and development investment.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2007년도 7th International Meeting on Information Display 제7권2호
• /
• pp.1711-1714
• /
• 2007

Various manufacturing methods are analyzed by using manufacturing metrics to validate which method would be applicable to flexible microelectronics. Among others, Roll-to-Roll method is revealed to inherently have an excessive WIP resulting in long cycle time and limited diversity as well as low equipment efficiency.

• 한국문헌정보학회지
• /
• 제27권
• /
• pp.161-181
• /
• 1994

As information technologies are applied to the libraries in information society, the library services have been changing its feature. Therefore, the purpose of this paper is to explore and to establish a paradigm of the library services in information society. It is hypothesized that the application of information technologies leads to the change of the library services in information society. To prove the hypothesis, the data were collected from various research results carried out in the developed countries and by observing various libraries where the information technologies are extensively applied. The findings are as follows: 1. As information technologies are applied to the library, many new library services emerge for the society. 2. As the electronic data replace the paper data, the collection of a library becomes the collection of the libraries in the world. Therefore, the accessibility to the information network is more important than to own information in the library. Librarians select various electronic data according to the library policy which distinguishes their own library collection from others. The policy also solves the various problems related to weeding and preserving library collection. And the use of CD-ROM selection tools enable library users to select their own data. Now, the censorship becomes the concems of the library users, not the library. 3. The catalogs are reorganized for the electronic data for the international use. The most important information in the catalog is the location of the data and the multi access to the data are necessary. 4. As the information technologies are applied in book selection, cataloguing, information retreival and circulation, the library users are enable to service themselves in the library. And most of the routine works related to the information service are taken over by the library staffs. Professional librarians engage in user education, information marketing and fund raising. 5. Public libraries in information society serves those who have no access to the information. They help the illiterates. patients in the hospital, prisoners, and homeless in the city. Therefore, the information technologies enhance the role of librarians in professional work in the library as well as in the information society.