• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• 제27권1호
• /
• pp.92-96
• /
• 2001

Velopharyngeal function refers to the combined activity of the soft palate and pharynx in closing and opening the velopharyngeal port to the required degree. In normal speech, various muscles of palate & pharynx function as sphincter and occlude the oropharynx from the nasopharynx during the production of oral consonant sounds. Inadequate velopharyngeal function caused by neurologic disorder - cerebral apoplexy, regressive diseases - disseminated sclerosis, Parkinson's disease, congenital deformity - cleft palate, cerebral palsy and etc. may result in abnormal speech characterized by hypernasality, nasal emission and decreased intelligibility of speech due to weak consonant production. In our study, we constructed speech aids prosthesis - Palatal lift in acquired idiophathic VPI patient and assessed velopharyngeal function with various diagnostic instruments which can evaluate the speech characteristics objectively.

• The Journal of the Korean life insurance medical association
• /
• 제3권1호
• /
• pp.142-148
• /
• 1986

Liver is an oragan which has various functions. For this functions in liver disease change variously, many methods of examination of them are invented. Each liver disease impairs these functions diversly rather than uniformly, thus it is possible to differentiate each disease by using various methods of testing it. Liver has high reproductive capacity and despite partial impairment of its function localized disease may not show any abnormality in liver function test due to compensation of remaining intact tissue of the liver. Thus the result of liver function test should be interpreted under adequate clinical investigation with other test, not depending on the liver function test only. This thesis deals with the composition, distribution in living body and clinical significance of liberating enzyme, GOT, GPT, and LDH which are included in serum enzyme that show abnormality in liver disease.

• Journal of information and communication convergence engineering
• /
• 제19권1호
• /
• pp.54-60
• /
• 2021

Various digital devices were supplied throughout the Fourth Industrial Revolution. Accordingly, the importance of data processing has increased. Data processing significantly affects equipment reliability. Thus, the importance of data processing has increased, and various studies have been conducted on this topic. This study proposes a modified Gaussian filter algorithm based on a fuzzy membership function. The proposed algorithm calculates the Gaussian filter weight considering the standard deviation of the filtering mask and computes an estimate according to the fuzzy membership function. The final output is calculated by adding or subtracting the Gaussian filter output and estimate. To evaluate the proposed algorithm, simulations were conducted using existing additive white Gaussian noise removal algorithms. The proposed algorithm was then analyzed by comparing the peak signal-to-noise ratio and differential image. The simulation results show that the proposed algorithm has superior noise reduction performance and improved performance compared to the existing method.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 한국정보통신학회 2021년도 춘계학술대회
• /
• pp.72-74
• /
• 2021

The deep learning process currently utilized in various fields consists of data preparation, data preprocessing, model generation, model learning, and model evaluation. In the process of model learning, the loss function compares the value of the model with the actual value and outputs the difference. In this paper, we analyze various loss functions used in the deep learning model for biomarker extraction, which measure the degree of loss of neural network output values, and try to find the best loss function through experiments.

• Proceedings of the Korean Vacuum Society Conference
• /
• 한국진공학회 2014년도 제46회 동계 정기학술대회 초록집
• /
• pp.166.1-166.1
• /
• 2014

We have controlled the graphene surface in two ways to improve the device performance of optoelectronics based on graphene transparent conductive films. We controlled multilayer graphene (MLG) work function and localized surface plasmon resonance wavelength using a silver nanoparticles formed on graphene surface. Graphene substrates were prepared using a chemical vapor deposition and transfer process. Various size of silver nanoparticles were prepared using a thermal evaporator and post annealing process on graphene surface. Silver nanoparticles were confirmed by using scanning electron microscopy (SEM). Work functions of graphene surface with various sizes of Ag nanoparticles were measured using ultraviolet photoelectron spectroscopy (UPS). The result shows that the work functions of MLG could be controlled from 4.39 eV to 4.55 eV by coating different amounts of silver nanoparticles while minimal changes in the sheet resistance and transmittance. Also the Localized surface plasmon resonance (LSPR) wavelength was investigated according to various sizes of silver nanoparticles. LSPR wavelength was measured using the absorbance spectrum, and we confirmed that the resonance wavelength could be controlled from 396nm to 425nm according to the size of silver nanoparticles on graphene surface. To confirm improvement of the device performance, we fabricated the organic solar cell based on MLG electrode. The results show that the work function and plasmon resonance wavelength could be controlled to improve the performance of optoelectronics device.

• Journal of Welding and Joining
• /
• 제11권3호
• /
• pp.34-47
• /
• 1993

Finite element models were developed for thermal and residual stress analysis for the specific welding problems. They were used to evaluate the effectiveness of the various welding heat input models, such as ramp heat input function and lumped pass models. Through the parametric studies, thermal-mechanical modeling sensitivity to the ramp function and lumping techniques was determined by comparing the predicted results with experimental data. The kinetics for residual stress formation during welding can be developed by iteration of various proposed mechanisms in the parametric study. A ramp heat input function was developed to gradually apply the heat flux with variable amplitude to the model. This model was used to avoid numerical convergence problems due to an instantaneous increase in temperature near the fusion zone. Additionally, it enables the model to include the effect of a moving arc in a two-dimensional plane. The ramp function takes into account the variation in the out of plane energy flow in a 2-D model as the arc approaches, travels across, and departs from each plane under investigation. A lumped pass model was developed to reduce the computation cost in the analysis of multipass welds. Several weld passes were assumed as one lumped pass in this model. Recommendations were provided about ramp lumping techniques and the optimum number of weld passes that can be combined into a single thermal input.

• Journal of the Korean Institute of Rural Architecture
• /
• 제14권4호
• /
• pp.37-45
• /
• 2012

The villages in island were established overcoming natural environment through Shamanism and changed by developing various industrials like transportation. Gapa Island located in southern part of Jejudo is flat topography different from the other islands. The purpose of this study is to clarify characteristics on transformation of community space in Gapa Island. For purpose, community spaces in Gapa Island are researched such as establishment, function, change, and use of community space. Spatial components in Gapa Island are like as spaces in faith, residential area, area for production, commercial zone, community space, education facilities, public offices, port, and roads. The methods of this study are literature research and interview survey for residents in Gapa Island. The results are as followings: First, community space is in charge about social, industrial, and religious function. Second, for traditional spaces separated for male and female, demarcation of space does not exist in industrial side but the demarcation has still been exist in religious side. Finally, by development of tourism new community space has been charge in festival function as well as function of space like agora for meeting with people freely, which is relatively various in function of community space in social side. Role of the dock for ship, main transportation of island, is being increasing as square.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• 제41권3호
• /
• pp.145-153
• /
• 2018

Taguchi regarded the concept of quality as 'total loss to society due to fluctuations in quality characteristics from the time of supplied to the customer.' The loss function is a representative tool that can quantitatively convert the loss that occurs due to the deviation of the quality characteristic value from the target value. This has been utilized in various studies with the advantage that it can change the social loss caused by fluctuation of quality characteristics to economic cost. The loss function has also been used extensively in the study of producer specification limits. However, in previous studies, only the second order loss function of Taguchi is used. Therefore, various types of losses that can occur in the process can't be considered. In this study, we divide the types of losses that can occur in the process considering the first and second loss functions and the Spiring's reflected normal loss function, and perform total inspection before delivering the customer to determine the optimal producer specification limit that minimizes the total cost. Also, we will divide the quality policy for the products beyond the specification limits into two. In addition, we will show the illustration of expected loss cost change of each model according to the change of major condition such as customer specifications and maximum loss cost.

• The Journal of Information Systems
• /
• 제7권1호
• /
• pp.99-128
• /
• 1998

The increasing importance of IT rose to the top of list of marketing managers' key concerns and IT has been used widely in performing various marketing activities and decisions. However, little was known about how to employ IT in various marketing activities and how to use IT as a strategic marketing means. Also, comprehensive empirical studies have rarely been conducted. This study examines the effectiveness of integrative use of marketing and IT. More specifically, this study attempts to identify the factors that influence the effectiveness of marketing information systems. The manufacturing firms listed in the Korean Stock Market were surveyed. the major findings of this study are as follows. First, the variables of organizational characteristics such as formalization of decision making cooperation between marketing function and IS function, and degree of decentralization were significantly related to the success of marketing information systems. The variables of user highly associated with the success of marketing information systems. Second, it was also found that the support capability of marketing information systems is the major factor of the effectiveness of marketing information systems. Third, the variables marketing function and IS function, and ratio of export sales to total sales were three variables such as marketing knowledge of marketing managers, cooperation were the main factors to affect the users' satisfaction with the information system. These results imply that, in order to increase the effectiveness of marketing information systems, a firm should enhance a cooperation between marketing function and IS function, diversify the support capability of IS, and strengthen the computer mind and computer knowledge of end-uses.

• Communications of the Korean Mathematical Society
• /
• 제32권2호
• /
• pp.305-319
• /
• 2017

Recently many authors have investigated so-called Aleph (${\aleph}$)-function and its various properties. Here, in this paper, we aim at establishing certain integral formulas involving the Aleph (${\aleph}$)-function. Precisely, integrals with product of Aleph (${\aleph}$)-function with Jacobi polynomials, Bessel Maitland function, general class of polynomials were under consideration. Some interesting special cases of our main result are also considered and shown to be connected with certain known ones.