• 한국수산과학회지
• /
• 제17권3호
• /
• pp.191-196
• /
• 1984

색광에 대한 말쥐치 Navodon modestus의 행동을 조사하기 위하여, 2가지씩의 서로 다른 색광을 조합하여 수조의 양단에서 동시에 광자극을 가했을 때의 반응을 주간과 야간으로 구분 조사한 결과는 다음과 갈다. 1. 수조내에서의 말쥐치의 구간별분포곡선은 양단 구간에 다소 많이 모여 대체로 U 자형이 되었다. 2. 양색선원쪽에서의 평균분포차는 $10.65\%(4.59{\sim}19.16\%)$였고, 주간($13.20\%$)보다 야간($8.09\%$) 에 적었다. 3. 말쥐치가 잘 모이는 색광은 주간과 야간의 구별없이 청색, 백색, 황색, 적색의 순으로 나타났다. 4. 조명시간의 경과에 따른 집어율의 변화는 일정한 증감추세를 보이지 않고 계속 불안정하게 변동했다. 5. 두가지 색광에 대한 집어율의 차는 비교적 뚜렸하지 않았는데 야간보다 주간에 그 차가 심했다.

• Nuclear Engineering and Technology
• /
• 제52권3호
• /
• pp.633-646
• /
• 2020

Imaging and scattering techniques using thermal neutrons allow to analyze complex specimens in scientific and industrial researches. Owing to this advantage, there have been a considerable demand for neutron facilities in the industrial sector. Among neutron sources, an accelerator driven compact neutron source is the only one that can satisfy the various requirements-construction budget, facility size, and required neutron flux-of industrial applications. In this paper, a target, moderator, and reflector (TMR) system for low-energy proton-accelerator driven compact thermal neutron source was designed via Monte Carlo simulations. For 10-30 MeV proton beams, the optimal conditions of the beryllium target were determined by considering the neutron yield and the blistering of the target. For a non-borated polyethylene moderator, the neutronic properties were verified based on its thickness. For a reflector, three candidates-light water, beryllium, and graphite-were considered as reflector materials, and the optimal conditions were identified. The results verified that the neutronic intensity varied in the order beryllium > light water > graphite, the compacter size in the order light water < beryllium < graphite and the shorter emission time in the order graphite < light water < beryllium. The performance of the designed TMR system was compared with that of existing facilities and were laid between performance of existing facilities.

• 한국세라믹학회지
• /
• 제42권3호
• /
• pp.178-181
• /
• 2005

Silicon oxynitride (SiON) 막은 플라즈마 화학기상증착법(PECVD)으로 $SiH_4,\;N_2O$와 $N_2$ 가스를 사용하여 $SiO_2/Si$ 위해 증착되었다. 증착 변수에 따라서 SiON 막의 굴절률은 prism coupler를 사용하여 1552nm 파장에서 $1.4480\~1.4958$까지 변화하였다. 평판 광도파로 코어로 사용되는 SiON 막의 두께는 $6{\mu}m$이고, buffer 막과의 굴절률 차이(An)는 $0.36\%$이다. 또한 식각 공정으로 $SiO_2$ 막 위에 증착된 SiON 막은 건식식각을 통해서 수행되었다. 광화이버에 $1.55{\mu}m$ 파장의 레이저론 입력단에 조사하였다. 결과적으로 저굴절률 차이 SiON 광도파로를 제작하였으며, 출력단에서 single-mode 형상을 확인하였다.

• 한국양식학회:학술대회논문집
• /
• 한국양식학회 2004년도 수산관련학회 공동학술대회 발표요지집
• /
• pp.513-513
• /
• 2004

Manila clam, Ruditapes philippinarum, is commercially and ecologically important marine bivalve in Korea and japan. However, clam landings in the two countries have dramatically declined since the 1980-1990's. In the present study, the protozoan parasite, Perkinsus sp., lectin (host's defense-related glycoprotein) and histopathological features were investigated in Manila clams collected from Gomso Bay in Korea and Ariake Bay in japan (one of the largest clam beds in each country) during summer and fall, 2002-2003. DNA sequences of non-transcribe spacer (NTS), internal transcribed space. (ITS) and 5.85 rRNA of Perkinsus sp. were identical to those of P. atlanticus that was reported in Europe and Korea. For diagnosis of Perkinsus, the fluid thioglycollate medium (FTM) and the 2 M NaOH lysis methods were used. Prevalence of the parasite varied from 92.5-98.7% in Gomso Bay and 35.5-37.9% in Ariake Bay. Infection intensity, in terms of the number of Perkinsuscells per gram tissue wet weight, in the clams of Gomso Bay in fall 2002 averaged 1,010,077-470,937 recording approximately100 times higher than that of Ariake Bay, and these were twice higher than those of summer samples in each location. Mean hemagglutination titer of the clams from Gomso Bay was approximately 60-folds higher than that of clams from Ariake Bay in 2002. In histological preparation of the clams from Gomso Bay in 2002, trophozoites of P. atlanticus were in groups and resulted in severe inflammatory response of host clam. Prevalence of the trematod, Cercaria tapes-like in the clams of Gomso Bay and Ariake Bay were 8.8 % and 10.5% respectively. In conclusion, the clams from Gomso Bay showed more severe pathologic symptoms and higher immune response than those of the clams from Ariake Bay.

• 천문학회지
• /
• 제48권1호
• /
• pp.57-66
• /
• 2015

Monte-Carlo radiative models of the diffuse Galactic light (DGL) in our Galaxy are calculated using the dust radiative transfer code MoCafe, which is three-dimensional and takes full account of multiple scattering. The code is recently updated to use a fast voxel traversal algorithm, which has dramatically increased the computing speed. The radiative transfer models are calculated with the generally accepted dust scale-height of 0.1 kpc. The stellar scale-heights are assumed to be 0.1 or 0.35 kpc, appropriate for far-ultraviolet (FUV) and optical wavelengths, respectively. The face-on optical depth, measured perpendicular to the Galactic plane, is also varied from 0.2 to 0.6, suitable to the optical to FUV wavelengths, respectively. We find that the DGL at high Galactic latitudes is mostly due to backward or large-angle scattering of starlight originating from the local stars within a radial distance of r < 0.5 kpc from the Earth. On the other hand, the DGL measured in the Galactic plane is mostly due to stars at a distance range that corresponds to an optical depth of $${\sim_\sim}$$ 1 measured from the Earth. Therefore, the low-latitude DGL at the FUV wavelength band would be mostly caused by the stars located at a distance of $r{\leq}0.5$ kpc and the optical DGL near the Galactic plane mainly originates from stars within a distance range of $1{\leq}r{\leq}2kpc$. We also calculate the radiative transfer models in a clumpy two-phase medium. The clumpy two-phase models provide lower intensities at high Galactic latitudes compared to the uniform density models, because of the lower effective optical depth in clumpy media. However, no significant difference in the intensity at the Galactic plane is found.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제14권5호
• /
• pp.2156-2170
• /
• 2020

This paper presents a fire detection algorithm with a minimal false detection rate, intended for a thermal imaging surveillance environment, whose properties vary depending on temporal conditions of day or night and environmental changes. This algorithm was designed to minimize the false detection alarm rate while ensuring a high detection rate, as required in fire detection applications. It was necessary to reduce false fire detections due to non-flame elements occurring when existing fixed threshold-based fire detection methods were applied. To this end, adaptive flame thresholds that varied depending on the characteristics of input images, as well as the center of gravity of the heat-source and hot-source regions, were analyzed in an attempt to minimize such non-flame elements in the phase of selecting flame candidate blocks. Also, to remove any false detection elements caused by camera shaking, one of the most frequently raised issues at outdoor sites, preliminary decision thresholds were adaptively set to the motion pixel ratio of input images to maximize the accuracy of the preliminary decision. Finally, in addition to the preliminary decision results, the texture correlation and intensity of the flame candidate blocks were averaged for a specific period of time and tested for their conformity with the fire decision conditions before making the final decision. To verify the fire detection performance of the proposed algorithm, a total of ten test videos were subjected to computer simulation. As a result, the fire detection accuracy of the proposed algorithm was determined to be 94.24%, with minimum false detection, demonstrating its improved performance and practicality compared to previous fixed threshold-based algorithms.

• 한국세라믹학회지
• /
• 제47권4호
• /
• pp.343-352
• /
• 2010

A zirconia gel/polymer hybrid nanofiber was produced in a nonwoven fabric mode by electrospinning a sol derived from hydrolysis of zirconium butoxide with a polyvinyl butyral. Results indicated that the hydroxyl groups on the vinyl alcohol units in the backbone of the polymer were involved in the hydrolysis as well as grafting the hydrolyzed zirconium butoxide. In addition, use of acetic acid as a catalyst resulted in further hydrolysis and condensation in the sol, which led to the growth of -Zr-O-Zr- networks among the polymer chains. These networks gradually transformed into a crystalline zirconia structure upon heating. The as-spun fiber was smooth but partially wrinkled on the surface. The average fiber diameter was $690{\pm}110\;nm$. The fiber exhibited a strong but broad blue photoluminescence with its maximum intensity at a wavelength of ~410 nm at room temperature. When the fiber was heat-treated at $400^{\circ}C$, the fiber diameter shrunk to $250{\pm}60\;nm$. Nanocrystals which belonged to a tetragonal zirconia phase and were ~5 nm in size appeared. A strong white photoluminescence was observed in this fiber. This suggests that oxygen or carbon defects associated with the formation of the nanocrystals play a role in generating the photoluminescence. Further heating to $800^{\circ}C$ resulted in a monoclinic phase beginning to form In the heat-treated fibers, coloring occurred but varied depending on the heating temperature. Crystallization, coloring, and phase transition to the monoclinic structure influenced the photoluminescence. At $600^{\circ}C$, the fiber appeared to be fully crystallized to a tetragonal zirconia phase.

• 성인간호학회지
• /
• 제14권3호
• /
• pp.459-469
• /
• 2002

Purpose: Experience of chest pain may be different in women from that of men and this discrepancy may cause misdiagnosis of angina contribute to mortality by this disease in women. The purpose of this study was to analyze the characteristics of chest pain and responses to the symptoms in women. Method: A content analysis was conducted with interviewed data obtained from women who underwent the treadmill test Result: Seven major categories were identified from this content analysis: attributes of chest pain; accompanied symptoms; precipitating factors; relief strategies; family support; communication with physicians; and effects of chest pain on their lives. Characteristics of pain were described as heaviness, tightness, heating sensation, tearing, and others. Duration and intensity of pain varied in a wide range. Radiating pain presented in 9 patients, and the locations of radiation were throat, neck, shoulder arm and fingers. Women tended not to respond actively to their chest pain, and didn't get appropriate support either from their family or from their physicians when they reported chest pain. Conclusion: Women express non-typical as well as typical patterns of pain when they experience chest pain. Clinicians have to consider the variability of symptoms when they assess women with suspicions of angina.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2008년도 춘계학술대회논문집
• /
• pp.54-60
• /
• 2008

The atomization characteristics of the dual air supplying twin-fluid nozzle were investigated experimentally using PIV and PDA systems. The two-fluid nozzle is composed of three main parts: the feeding injector to supply fluid that is controlled by a PWM (pulse-width modulation) mode, the adaptor as a device with the ports for supplying the carrier and assist air and the main nozzle to produce the spray. The main nozzle has the swirl tip with four equally spaced tangential slots, which give the injecting fluid an angular momentum. The angle of the swirl tip varied with 0$^{\circ}$ 30$^{\circ}$, 60$^{\circ}$ and 90$^{\circ}$, and the ratios of carrier air to assist air and ALR(total air to liquid) were 0.55 and 1.23, respectively. The macroscopic behavior of the spray was investigated using PIV system, and the mean velocity, turbulent intensity and SMD distributions of the sprays were measured using PDA system. As the results, the mean axial velocity at the spray centerline decrease with the increase of the swirl angle. The turbulent intensities of the axial and radial velocity were increased with the increase of the swirl angle. The mean SMD (Sauter mean diameter) of the radial direction along the axial distance shows the lowest value at the swirl angle of 60$^{\circ}$.

• 대한기계학회논문집B
• /
• 제20권12호
• /
• pp.4013-4026
• /
• 1996

A numerical simulation has been carried out for the jet impinging on a flat plate and a semi-circular concave surface. In this computation finite volume method was employed to solve the full Navier-Stokes equation based on a non-orthogonal coordinate with non staggered variable arrangement. The standard k-.epsilon. turbulent model and low Reynolds number k-.epsilon. model(Launder-Sharmar model) with Yap's correction were adapted. The accuracy of the numerical calculations were compared with various experimental data reported in the literature and showed good predictions of centerline velocity decay, wall pressure distribution and skin friction. For the jet impingement on a semi-circular concave surface, potential core length was calculated for two different nozzle(round edged nozzle and rectangular edged nozzle) to consider effects of the nozzle shape. The result showed that round edged nozzle had longer potential core length than rectangular edged nozzle for the same condition. Heat transfer rate along the concave surface with constant heat flux was calculated for various nozzle exit to surface distance(H/B) in the condition of same jet velocity. The maximum local Nusselt number at the stagnation point occurred at H/B = 8 where the centerline turbulent intensity had maximum value. The predicted Nusselt number showed good agreement with the experimental data at the stagnation point. However heat transfer predictions along the downstream were underestimated. This results suggest that the improved turbulence modeling is required.