• 한국습지학회지
• /
• 제20권1호
• /
• pp.63-71
• /
• 2018

강우유출 조건에서 침투도랑의 여과기작은 수리학적 조건에 따라 변화할 수밖에 없다. 침투도랑에서 유출시간에 따른 다양한 여과조건이 입자상 물질의 제거에 미치는 영향을 이해하는 것은 매우 중요하다. 본 연구에서는 도로강우 유출수 처리를 위해 설치된 우드칩 충진 침투도랑에서 일어나는 여과기작을 조사 분석하였다. 유출수문곡선을 몇 개의 영역으로 분리하고 각 영역에서의 여과 메커니즘을 분석한 결과 여과는 수직흐름과 수평흐름, 그리고 불포화 흐름, 부분 포화흐름, 그리고 포화흐름을 거치면서 진행되는 것으로 나타났다. 불포화 흐름조건에서는 입자상 물질의 제거효율은 55-76%를 나타냈으며 주요 기작은 물리적인 억류(trapping)로 나타났으며 유출유량이 크게 증가하여 침투도랑에서 포화흐름이 조성되었을 때 제거효율은 75-95%로 크게 증가하였는데 이는 확산기작의 작용 때문인 것으로 분석되었다. 강우 중단 후 유출량 감소로 침투도랑이 부분 포화흐름으로 전환되는 시점에는 음으로 하전된 공기와 물의 경계면의 존재로 여과효율이 감소한 것으로 추정된다. 강우시 급격히 변화하는 수리학적 조건에서 발생하는 흐름조건 및 여과 메커니즘과 이와 같은 인자가 여과효율에 미치는 영향을 도출하기 위하여 변수통제가 비교적 용이한 실험실 규모의 침투도랑에 대한 연구가 필요하다.

• 한국세라믹학회지
• /
• 제56권4호
• /
• pp.374-386
• /
• 2019

A process for nitrogen doping of TiO₂ ceramics was developed, whereby polycrystalline titania particles were prepared at 450-1000℃ with variation of the firing schedule under N₂ atmosphere. The effect of nitrogen doping on the polycrystallites was investigated by X-ray diffraction (XRD) and Raman analysis. The microstructure of the TiO₂ ceramics changed with variation of the firing temperature and the firing atmosphere (N₂ or O₂). The microstructural changes in the nitrogen-doped TiO₂ ceramics were closely related to changes in the Raman spectra. Within the evaluated temperature range, the nitrogen-doped titania ceramics comprised anatase and/or rutile phases, similar to those of titania ceramics fired in air. Infiltration of nitrogen gas into the titania ceramics was analyzed by Raman spectroscopy and XRD analysis, showing a considerable change in the profiles of the N₂-doped TiO₂ ceramics compared with those of the TiO₂ ceramics fired under O₂ atmosphere. The nitrogen doping in the anatase phase may produce active sites for photocatalysis in the visible and ultraviolet regions.

• 대한토목학회논문집
• /
• 제42권3호
• /
• pp.359-369
• /
• 2022

산사태에 대한 비탈면 안정해석시, 산지 비탈면의 경사와 지형의 변화가 심한 경우에는 엄밀한 해석으로 안정성을 평가해야 한다. 본 연구에서는 불포화층에서 강우로 인한 침투 현상을 해석하여 간극수압의 변동을 고려한 산사태 안정성 분석을 수행하였다. 비탈면 안정해석 시 실제 산사태가 발생한 지역을 선정하여 3차원 비탈면 안정해석을 수행하였고 무한비탈면 해석결과와 비교하였다. 세밀한 지반정보를 기반하여 3차원 비탈면 안정해석으로 지형에 따라 변동하는 산사태의 발생위치와 규모를 예측할 수 있다고 판단되었다.

• 설비공학논문집
• /
• 제22권2호
• /
• pp.57-63
• /
• 2010

Air curtains are widely used for gates of shopping mall, warehouse, cold stores and refrigerated display cabinets. The purpose of the air curtain is to reduce the infiltration of outdoor air and heat loss from the air conditioning space to ambient air. The discharge angle of air curtain is very important as the sealing efficiency is affected by it. This paper presents a performance of single jet air curtain in heating space when the discharge angle of nozzle changes. A numerical simulation is used to study the influence of various parameters on the efficiency of the downward-blowing air curtain device which is installed inside of the wall above the door. The performance of the air curtain is evaluated by sealing efficiency which provides the assessment of the energy savings. A condition of discharge angle that has the highest sealing efficiency is proposed.

• 한국농공학회지
• /
• 제17권3호
• /
• pp.3833-3839
• /
• 1975

The object of this experiment is to find out some flow characteristics of water through sand layer, to prevent moving sands in the filters of the fill Dam, infiltration gallery, well and Deversion Weir. This experiment was accomplished with different particle Sizes of Six Samples and different hydraulic gradient. The results obtained are Summarized as follows. 1. The critical hydraulic gradients for laminar flow was found to be between 1 and 2 when the sand used had the effective diameter, D10 of between 0.18cm and 0.45cm. 2. The critical hydraulic gradients for different particle sizes of sands were varied considerably. 3. There was a negative correlation between critical hydraulic gradient and critical Velocity, and between effective particle diameter D10 and critical hydraulic gradient respectively. 4. In spite of relatively small variation of void ratio of sands used, the values of the coefficient of permeability varied considerably. There was a negative correlation between coefficient of permeability and void ratio.

• Journal of the Optical Society of Korea
• /
• 제15권4호
• /
• pp.398-402
• /
• 2011

In this paper, we have proposed a principle to design wideband, low dispersion and temperature stabilized slow light structure in slotted photonic crystal waveguide (SPCW). The infiltration of the silicon photonic crystal with polymer will enhance the slow light and increase the group index, whereas the different signs of thermo-optic coefficients of polymer and silicon make the proposed structure stable on temperature variation over $60^{\circ}C$ and improves the group index-bandwidth products of the designed structure. The SPCW structure is modified to maximize the slow light effect and minimize the dependence of the group index and hence the group velocity dispersion to temperature.

• 한국세라믹학회지
• /
• 제31권5호
• /
• pp.561-571
• /
• 1994

For the preparation of SiC composite, the properties of reaction sintering in the SiC-C-Si-Ti system with the titanium contents variation were investigated. Either the case of titanium additions or the case of direct infiltration of titanium in SiC+C preform, the newly formed fine-grained $\beta$-SiC, which was reacted from the molten silicon with graphite, was intergranulated between the original $\alpha$-SiC particles. Also titanium disilicide (TiSi2) was discontinuously formed isolated pocket in silicon matrix. The amount of titanium disilicide was gradually increased as titanium content increase. With the results of hardness and fracture toughness measurement, SiC-titanium disilicide (TiSi2) composite represented high properties compared with the system of the infiltrated pure silicon.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1994년도 추계학술대회 논문집
• /
• pp.169-175
• /
• 1994

This study attempts to develop a process which can produce three-dimensional shapes of metals directly from CAD data. Prototypes made from metals, can not only be used to test the mecchanical properties of the product, but also potentially become the actual die or product itself. The test-device of the process has been designed and manufactured. The laser scanning method using a scanning path schedule composed of circle and arc elements, scanning speed variation method and dwell method have been developed, which resist warping phenomenon and increase the adhesiveness between the layers. For the production of prototypes with pure iron powder, the optimal values of the principal process parameters have been determined, through which cross-shaped and twisted clover-shaped prototypes have been fabricated. In order to improve the strength of the prototype, the experimental studies of solid-phase sintering, and copper infiltration have been done.

• 한국농공학회:학술대회논문집
• /
• 한국농공학회 1998년도 학술발표회 발표논문집
• /
• pp.1-7
• /
• 1998

To investigate the water balance in a paddy rice field with the pumping station for irrigation water supply, flow measurements and analysis on various components of water balance were carried out. The investigated area is 103.7 ha, and the irrigation water was supplied for 102 days during the total irrigation period starting from June 1. It was found that the consumption rate was increased as the growing stage was progressed. The variation of evapotranspiration rate was shown same tendency as the consumption rate, while no apparent tendency was found in infiltration rate upon different growing stages. And the ground water input to the area was predominant during the early stage of growing period, while ground water output from the study area was predominant at the end of the growing stage. The range of return flow rate, the ratio of total outflow to total inflow in every decad, was 57.6 to 85.7%. These values are slightly higher than reported values from the other investigation projects.

• 한국농공학회논문집
• /
• 제56권4호
• /
• pp.53-58
• /
• 2014

The objective of this study is to suggest rainfall threshold for landslide forecasting and warning. For this study, we chose the research area where landslide have occurred. And we performed infiltration-stability analysis with rainfall intensity-duration. As the results of this study, slope stability variation chart with rainfall intensity-duration are established. This kind of chart is believed to be able to be used for forecasting and warning the landslide caused by rainfall.