• 제목/요약/키워드: variable speed controller

검색결과 348건 처리시간 0.024초

라인스캔 카메라 시스템을 이용(利用)한 스크랩 자동선별(自動選別) 연구(硏究) (Automated scrap-sorting research using a line-scan camera system)

  • 김찬욱;김행구
    • 자원리싸이클링
    • /
    • 제17권6호
    • /
    • pp.43-49
    • /
    • 2008
  • 본 연구에서는 라인스캔 카메라를 이용한 색도인식 스크랩 선별시스템을 설계 제작하고 제작한 시스템을 이용하여 철스크랩에 혼합되어 있는 Cu 스크랩을 자동으로 분리하는 연구를 수행하였다. 스크랩 자동선별 시스템은 크게 측정부, 이송부 그리고 이젝터로 구분되며 라인스캔 카메라, 광원 및 frame grabber로 구성된 측정부에서 스크랩 표면의 색도를 이메지 프로쎄싱 알고리즘에 의해 인식함으로써. 임의로 지정한 특정한 표면색상의 스크랩만에 에어노즐을 작동케 하여 선별하도록 되어 있다. 본 연구에서는 선별처리의 고속화에 대응하기 위하여 주파수 가변 광원시스템을 제작하여 선별시스템에 적용하였으며, 최적실험조건으로 스크랩 이송속도 25 m/min.에서 철스크랩중에 포함되어 있는 Cu스크랩을 90%이상 인식하여 약 80%의 선별효율을 얻었다.

인터넷 웹 기반의 PMSM원격제어시스템 (Internet Web-Based Remote Control System For Permanent Magnet Synchronous Motor Drives)

  • 김대현;최양광;김영석
    • 전자공학회논문지SC
    • /
    • 제41권2호
    • /
    • pp.9-16
    • /
    • 2004
  • 산업이 발전되어감에 따라 일반 가정에서 산업의 각 분야에 이르기까지 각종 전동기의 사용이 증가하고 있으며, 그 종류도 날로 다양해지고 있다. 이러한 이유로 산업전반에 널리 보급된 인터넷을 이용하여, 가변속 구동 시스템에 대해 원격조작하고, 일괄 관리하거나 실시간으로 관리기기의 상태를 파악하고, 데이터를 수집, 처리하는 것이 요구된다. 또한 인터넷을 통해 기기를 직접 제어, 관리함으로써 시간과 공간, 비용절감의 측면에서 큰 효과를 기대 할 수 있다. 따라서 본 논문에서는 인터넷 웹 기반의 PMSM 원격제어시스템 개발을 연구하였다. 인터넷을 이용한 원격제어를 위해 DSP 제어기 및 TCP/IP를 사용한 클라이언트/서버 시스템과 PMSM의 상태와 Data를 확인할 수 있는 웹 인터페이스를 개발하였다. 이 시스템은 웹 기반의 관리 프로그램을 통해 실시간으로 PMSM의 기동, 정지 및 가변속에 대한 제어와 모니터링이 가능하다.

리니어 왕복운동 제어시스템 구동용 가동코일형 리니어 액츄에이터의 설계제작 및 제어정수 도출 (Design and Extraction of Control Parameters of a Moving-Coil-Type Linear Actuator for Driving of Linear Reciprocating Motion Control Systems)

  • 장석명;정상섭;박희창;문석준;박찬일;정태영
    • 대한전기학회논문지:전기기기및에너지변환시스템부문B
    • /
    • 제48권5호
    • /
    • pp.241-248
    • /
    • 1999
  • Recently, many linear motion generators and motors are rapidly finding applications that ranges from short stroke linear motion vibrators, such as dynamic cone type loudspeakers to stirling engine driven linear reciprocating alternators, compressors, textile machines etc. The stroke-length may go up to 2m, and the maximum speed is in the range of 5 to 10m/s with oscillating frequency as high as 15 kHz. Therefore, the linear oscillating actuators(LOAs) may be considered as variable speed drivers of precise controller with stoke-length and reversal periods during the reciprocating motion. In this paper, the design, fabrication, experiments, and extraction of control parameters of a moving coil type LOA for driving of linear reciprocating motion control systems, are treated. The actuator consists of the NdFeB permanent magnets with high specific energy as the stator produced magnetic field, a coil-wrapped nonmagnetic hollow rectangular bobbin structure, and an iron core as a pathway for magnetic flux. Actually, the design is accomplished by using FEM analysis for the basic configuration of a magnetic circuit, and characteristic equations for coil design. In order to apply as the drivers of a linear motion reciprocating control system, the control parameters and circuit parameters, such as input voltage-stoke, exciting frequency-stoke, coil inductance and so on, are extracted from the analysis and experiments on concerning a fabricating LOA.

  • PDF

Wind Energy Interface to Grid with Load Compensation by Diode Clamped Multilevel Inverters

  • Samuel, Paulson;Naik, M. Kishore;Gupta, Rajesh;Chandra, Dinesh
    • Journal of Power Electronics
    • /
    • 제14권2호
    • /
    • pp.271-281
    • /
    • 2014
  • Fluctuating wind conditions necessitate the use of a variable speed wind turbine (VSWT) with a AC/DC/AC converter scheme in order to harvest the maximum power from the wind and to decouple the synchronous generator voltage and frequency from the grid voltage and frequency. In this paper, a combination of a three phase diode bridge rectifier (DBR) and a modified topology of the diode clamped multilevel inverter (DCMLI) has been considered as an AC/DC/AC converter. A control strategy has been proposed for the DCMLI to achieve the objective of grid interface of a wind power system together with local load compensation. A novel fixed frequency current control method is proposed for the DCMLI based on the level shifted multi carrier PWM for achieving the required control objectives with equal and uniform switching frequency operation for better control and thermal management with the modified DCMLI. The condition of the controller gain is derived to ensure the operation of the DCMLI at the fixed frequency of the carrier. The converter current injected into the distribution grid is controlled in accordance with the wind power availability. In addition, load compensation is performed as an added facility in order to free the source currents being fed from the grid of harmonic distortion, unbalance and a low power factor even though the load may be unbalanced, non-linear and of a poor power factor. The results are validated using PSCAD/EMTDC simulation studies.

진화전략을 이용한 도립진자의 안정화 및 위치제어 (Position Control and Stabilization of Inverted Pendulum using the Evolution Strategies)

  • 이동욱;심귀보
    • 한국지능시스템학회논문지
    • /
    • 제6권4호
    • /
    • pp.71-80
    • /
    • 1996
  • 본 논문은 진화연산 중 실수값 탐색에 유리한 진화전략(Evolution Strategies)을 이용하여 대표적인 비선형 시스템인 도립전자(Inverted Pendulum)의 안정화 및 위치제어를 실현한다. 도립진자의 제어입력은 진자의 상태변수 x, $, $, $ 의공간을 나누어 그 공간에해당되는 염색체의 원소가 된다. 일바적으로 염색체의 길이가 길어지면 최적의해를 탐색하기 위한 진화시간은 길어진다. 따라서 본 논문에서는 진화속도를 개선하기 위하여, 서로 대칭이 되는 진자의 구간에 대해서는 제어입력을 따로 구하지 않고 그 제어입력의 부호만 바꾸어 주는 방식을 채용하여 상태공간을 반으로 줄이는 방법을 제안하였으며, 진자의 수레가 제어 목표점에서 멀리 떨어져 있는 경우와 가까이 있는 경우로 나누어, 염색체의 진화과정을 2단계에 걸쳐 수행하게 함으로써 염색체의 진화속도의 개선은 몰룬 시스템 전체의 성능을 향상시켰다. 또 하나의 방법으로 신경회로망과 진화전략을 융합한 방법을 제안하고, 제안한 제어방식은 컴퓨터 시뮬레이션을 통하여 그 유효성을 확인한다.

  • PDF

Dynamometer Test for the CVT System using Spring

  • Kwon, Young-Woong;Yang, Seung-Bok
    • International journal of advanced smart convergence
    • /
    • 제11권3호
    • /
    • pp.222-228
    • /
    • 2022
  • As a means to cope with the climate change crisis caused by global warming, automobile manufacturers continue to make efforts to use the driving energy of vehicles as electricity. As a result, parts industry such as battery, motor, and controller are attracting attention. China is often seen in large cities, with electric vehicles such as electric bicycles, electric motorcycles, and small electric vehicles popularized and commercialized, mainly in large cities. However, small electric vehicles are not popular in Korea, which is why the country's topography is high in hills. In order to drive the hilly domestic roads, power performance including vehicle climbing ability should be improved. In order to improve the power performance and the climbing capacity of small electric vehicles, the capacity of the motor should be increased. However, when the performance of the motor is improved, the weight of the motor becomes heavy and the price competitiveness is likely to decrease. In addition, in order to operate a high-performance motor, the power consumption of the battery is rapidly increased, so various problems must be solved. In order to commercialize a small electric vehicle for one or two people who do not emit harmful exhaust gas to the human body in a hilly domestic terrain, it is effective to have a separate transmission system. In this study, we were conducted dynamometer test to produce a continuously variable transmission(CVT) system prototype using a spring that can be applied to a small electric vehicle and to install a CVT system prototype manufactured in a small electric vehicle. The dynamometer test results showed that the maximum speed performance, acceleration performance, and climbing performance were improved.

산업용 ROBOT와 공작기계를 위한 AC SERVO MOTOR 제어기 개발 (DEVELOPMENT OF AC SERVO MOTOR CONTROLLER FOR INDUSTRIAL ROBOT AND CNC MACHINE SYSTEM)

  • 임상권;이진원;문용기;전동렬;진상현;오인환;김동일;김성권
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 1992년도 하계학술대회 논문집 B
    • /
    • pp.1211-1214
    • /
    • 1992
  • 본 논문에서 제안한 Fara DS Series의 AC SERVO (DC BRUSHLESS) MOTOR 제어기는 ROBOT, CNC, 각종 공작기계및 FA기기에서 MOTOR를 구동 원으로 사용하는데 사용되는 제품이다. AC SERVO MOTOR DRIVE의 Inverter에 IGBT(Insulated Gate Bipoler Transistor)를 사용하여 Switching 주파수를 높임으로써 Motor를 가변속 제어할때 발생하는 소음 및 진동을 극소화 하였다. 또한 일반적으로 Motor 속도제어를 급감속으로 제어할때 Servo Motor의 비선형 특성으로 인한 전류위상을 보상하여 모든 동작구간에서 최적의 상태의 제어가 되도록 개발하였다. 그리고 다양한 User Option 기능을 내장하여 User가 원하는 제어대상에 효과적으로 적용할 수 있도록 하였다. 아울러 MOTOR 제어기에 내장 된 다수의 보호기능을 통해서 Motor운전중 발생하는 이상상태에 대해 제어기를 보호할 수 있도록 하였다. 제안한 제어기는 부하변동, 전압변동, 온습도변동에 대해 속도변동율을 최소화 함으로써 ROBOT, CNC등 FA분야에서 폭넓게 이용할수 있다.

  • PDF

Memory Organization for a Fuzzy Controller.

  • Jee, K.D.S.;Poluzzi, R.;Russo, B.
    • 한국지능시스템학회:학술대회논문집
    • /
    • 한국퍼지및지능시스템학회 1993년도 Fifth International Fuzzy Systems Association World Congress 93
    • /
    • pp.1041-1043
    • /
    • 1993
  • Fuzzy logic based Control Theory has gained much interest in the industrial world, thanks to its ability to formalize and solve in a very natural way many problems that are very difficult to quantify at an analytical level. This paper shows a solution for treating membership function inside hardware circuits. The proposed hardware structure optimizes the memoried size by using particular form of the vectorial representation. The process of memorizing fuzzy sets, i.e. their membership function, has always been one of the more problematic issues for the hardware implementation, due to the quite large memory space that is needed. To simplify such an implementation, it is commonly [1,2,8,9,10,11] used to limit the membership functions either to those having triangular or trapezoidal shape, or pre-definite shape. These kinds of functions are able to cover a large spectrum of applications with a limited usage of memory, since they can be memorized by specifying very few parameters ( ight, base, critical points, etc.). This however results in a loss of computational power due to computation on the medium points. A solution to this problem is obtained by discretizing the universe of discourse U, i.e. by fixing a finite number of points and memorizing the value of the membership functions on such points [3,10,14,15]. Such a solution provides a satisfying computational speed, a very high precision of definitions and gives the users the opportunity to choose membership functions of any shape. However, a significant memory waste can as well be registered. It is indeed possible that for each of the given fuzzy sets many elements of the universe of discourse have a membership value equal to zero. It has also been noticed that almost in all cases common points among fuzzy sets, i.e. points with non null membership values are very few. More specifically, in many applications, for each element u of U, there exists at most three fuzzy sets for which the membership value is ot null [3,5,6,7,12,13]. Our proposal is based on such hypotheses. Moreover, we use a technique that even though it does not restrict the shapes of membership functions, it reduces strongly the computational time for the membership values and optimizes the function memorization. In figure 1 it is represented a term set whose characteristics are common for fuzzy controllers and to which we will refer in the following. The above term set has a universe of discourse with 128 elements (so to have a good resolution), 8 fuzzy sets that describe the term set, 32 levels of discretization for the membership values. Clearly, the number of bits necessary for the given specifications are 5 for 32 truth levels, 3 for 8 membership functions and 7 for 128 levels of resolution. The memory depth is given by the dimension of the universe of the discourse (128 in our case) and it will be represented by the memory rows. The length of a world of memory is defined by: Length = nem (dm(m)+dm(fm) Where: fm is the maximum number of non null values in every element of the universe of the discourse, dm(m) is the dimension of the values of the membership function m, dm(fm) is the dimension of the word to represent the index of the highest membership function. In our case then Length=24. The memory dimension is therefore 128*24 bits. If we had chosen to memorize all values of the membership functions we would have needed to memorize on each memory row the membership value of each element. Fuzzy sets word dimension is 8*5 bits. Therefore, the dimension of the memory would have been 128*40 bits. Coherently with our hypothesis, in fig. 1 each element of universe of the discourse has a non null membership value on at most three fuzzy sets. Focusing on the elements 32,64,96 of the universe of discourse, they will be memorized as follows: The computation of the rule weights is done by comparing those bits that represent the index of the membership function, with the word of the program memor . The output bus of the Program Memory (μCOD), is given as input a comparator (Combinatory Net). If the index is equal to the bus value then one of the non null weight derives from the rule and it is produced as output, otherwise the output is zero (fig. 2). It is clear, that the memory dimension of the antecedent is in this way reduced since only non null values are memorized. Moreover, the time performance of the system is equivalent to the performance of a system using vectorial memorization of all weights. The dimensioning of the word is influenced by some parameters of the input variable. The most important parameter is the maximum number membership functions (nfm) having a non null value in each element of the universe of discourse. From our study in the field of fuzzy system, we see that typically nfm 3 and there are at most 16 membership function. At any rate, such a value can be increased up to the physical dimensional limit of the antecedent memory. A less important role n the optimization process of the word dimension is played by the number of membership functions defined for each linguistic term. The table below shows the request word dimension as a function of such parameters and compares our proposed method with the method of vectorial memorization[10]. Summing up, the characteristics of our method are: Users are not restricted to membership functions with specific shapes. The number of the fuzzy sets and the resolution of the vertical axis have a very small influence in increasing memory space. Weight computations are done by combinatorial network and therefore the time performance of the system is equivalent to the one of the vectorial method. The number of non null membership values on any element of the universe of discourse is limited. Such a constraint is usually non very restrictive since many controllers obtain a good precision with only three non null weights. The method here briefly described has been adopted by our group in the design of an optimized version of the coprocessor described in [10].

  • PDF