• Proceedings of the KIEE Conference
• /
• 2009.07a
• /
• pp.828_829
• /
• 2009

본 논문에서는 가변속 펌프 시스템에 적합한 SRM의 최적 구동을 위한 예측 방법에 대해 나타내었다. 회전자의 위치에 따른 쇄교 자속 곡선 모델링을 통하여 제안된 방법에 의해 전류의 최적 인가 시점을 테이블로 구성하였으며, 이를 기반으로 SRM 제어기 및 알고리즘을 Matlab/Simulink를 이용하여 시뮬레이션을 통해 결과값을 나타내었다.

• Proceedings of the KIPE Conference
• /
• 2002.07a
• /
• pp.427-430
• /
• 2002

The switched reluctance motor (SRM) drive system provides a good adjustable speed characteristics. But driving of SRM is nonlinear changed according to rotor position angle and phase current because of saturation in magnetic circuit, and it is difficult to drive the high efficiency. This paper proposes find point of high efficiency in variable load that are used to control switch-on/off angles and input voltage.

• Proceedings of the KIEE Conference
• /
• 1994.07a
• /
• pp.30-32
• /
• 1994

In this paper, in order to design Linear Pulse Motor(LPM) effectively, the flux density and the thrust force of LPM have been calculated in the air gap by using Finite Element Method(FEM). The kinds of magnetic circuit arc the variable reluctance(VR), hybrid(HB), and permanent magnet(PM) type. Tooth and slot shape arc rectangular, wedge head(tapcr; 10, 20 degree), and semi-circle type.

• Proceedings of the KIEE Conference
• /
• 1998.07a
• /
• pp.18-21
• /
• 1998

A stabilization scheme of a missile actuator using fuzzy controller is proposed. A variable-reluctance stepping motor adopted as a actuator is critically restricted useful operation since pronounced oscillatory behaviour at a certain input frequencies. The previous stabilization scheme. which employs frequency modulation, of the clock-pulse source using derived from the modulation envelope of the total intake current is modified using fuzzy control. The proposed scheme has apparent advantage, particularly in size, mass and flexibility.

• Proceedings of the KIEE Conference
• /
• 1996.07a
• /
• pp.92-94
• /
• 1996

The switched reluctance motor(SRM) has a simple structure with a doubly-salient and is studied as a variable speed motor since it has a good performance in a wide range of speed and torque. This paper presents the control scheme in which ON/OFF angles are controlled by PI controller that compensates the error between the command and real speeds, and the speed response is improved by braking operation in motor decelerating.

• Journal of Power Electronics
• /
• v.11 no.3
• /
• pp.285-293
• /
• 2011

This paper proposes two SRM driving systems using a variable dc-link voltage controlled by a single-phase inverter. Two SRM converter topologies of a half bridge type and a full bridge type are proposed according to the power circuits of an inverter. The phase current can be controlled by means of a PWM controller at the inverter, and the turn-on/off angle at the phase switches can be controlled by a position sensor at the converter in the drive system. The inverter acts as a peak-current limiter if the transient current exceeds its maximum value. SRMs using the proposed topologies maintain high efficiency due to energy regeneration after the turn-off of power switches. The operational modes of the proposed topologies are verified by simulation and experimental results.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.25 no.1
• /
• pp.59-63
• /
• 2011

In small-power applications, variable-speed motors having high efficiency and controllability become more dominant than brushed DC motors. BLDC motors with permanent magnets in the rotor and SRMs directed by reluctance torque due to no permanent magnets have been strongly studied as a candidate. Compared to the BLDC motors, SRMs are more suitable for low-cost applications since the magnetic structure is simple, mechanically robust, and cheap due to no additional excitation in the rotor such as copper wire, aluminum, and permanent magnets. In addition, relatively small number of phases in single and two-phase SRMs allows more cost savings with regards to material in the motor and switching devices in the converter. In this paper, several 2 phase SRMs are compared to a 3 phase 6/4 SRM in terms of flux distribution in key parts of the motors.

• Proceedings of the KIPE Conference
• /
• 2004.07a
• /
• pp.224-227
• /
• 2004

The goal of this paper is optimal switching angle of switched reluctance motor drive system for maximum energy ratio. A new magnetizing method with a low-frequency increasing the energy conversion ratio that is related to the efficiency of motor is proposed. As results, it improved the efficiency about $2[\%]$. And a torque ripple is also sufficiently reduced compared with that of the conventional switching angle magnetizing approach. In order to start softly regardless of a large ripple torque, the profile of phase current is predicted by the ANFIS, and current control mode was adapted when it is operated under the starting speed. Variable implementations on the fields will guarantee the more practical drive system.

• The Transactions of the Korean Institute of Electrical Engineers B
• /
• v.51 no.4
• /
• pp.165-173
• /
• 2002

The goal of this paper is optimal switching angle of switched reluctance motor drive system fur maximum energy ratio. A new magnetizing method with a low-frequency increasing the energy conversion ratio that is related to the efficiency of motor is proposed. As the results, it improved the efficiency about 2[%]. And a torque ripple is also sufficiently reduced compared with that of the conventional approach. In order tn start softly regardless of large ripple torque, the profile of phase current is predicted by the ANFIS, and current control mode was adapted when it is operated under the starting speed. Variable implementations en the fields will guarantee the more practical drive system.

• Proceedings of the KIEE Conference
• /
• 1993.07b
• /
• pp.1091-1094
• /
• 1993

Recently, in the industrial applications, the direct drive method with linear pulse motor(LPM) has been introduced and studied for practical use. This paper describes the analysis result of hybrid(HB), permanent magnet(PM), and variable reluctance(VR) type LPM. First, calculation of the flux density distribution in the air gap at these LPM by finite element method. And by mean of Maxwell's stress tensor with above magnetic flux density, calcurated the static thrust force and normal force.