• Journal of Korean Society of Environmental Engineers
• /
• v.27 no.4
• /
• pp.409-413
• /
• 2005

A method to estimate the autotrophic maximum specific growth rate is presented in this paper. First of all, the concentration of nitrifier is simulated based on the amount of N nitrified, the sludge age and the default value for the decay coefficient. Secondly the OUR of the sludge with access of ammonia is measured. The maximum specific growth rate can be calculated as ${\mu}_{max,A}\;=\;OUR_{max,A}/Y_A$. It was demonstrated that the maximum specific growth rate of autotrophic biomass is not a constants but a time variable parameter. It is concluded that using $OUR_{max,A}$ for dynamic estimating maximum specific growth rate is a good approach and that using a constant value for the maximum specific growth rate over a longer period of time could not predict the performance of activated sludge plants.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.12
• /
• pp.7118-7133
• /
• 2014

To derive an efficient operating system for business incubators, this study examined the operating performance according to incubator operating system and incubator manager. The survey targets were tenants of business incubators and factor analysis. Regression analysis was performed according to the reliability analysis, correlation analysis, regression analysis and parameter using the 19 Ver program SPSS analysis. As a result, the business incubators and business incubators operating system were found to be an important factor and among these, the H / W and system S / W systems were identified as significantly influential factors. On the other hand, this hypothesis of the performance of the support system and characteristics of the incubator manager was rejected for the variable parameters, which always appear to influence the other characteristic factors of the manager. Operational performance can be divided into an incubator performance center and tenant's performance, and the performance of the tenants were analyzed by the significant effect on the managers characteristics.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.8 no.4
• /
• pp.351-358
• /
• 2003

This paper describes distribution characteristics of switching surge voltage in stator windings of induction motor driven by IGBT PWM inverter. To analyze the voltage distribution between the turns and coils of stator winding, equivalent circuit model of induction motor including cable was proposed and high frequency parameter is computed by using finite-element method (FEM). From the electro-magnetic transient program (EMTP) simulation of the whole system for induction motor, feeder cable, and PWM inverter, the variable effect on rising time of the inverter, cable length, and switching frequency on the voltage distribution is also presented. In order to experiment, an induction motor, 380[V], 50[HP], with taps from one phase are built to consider the voltage distribution so that these results can be helpful when filter was designed to remove high dv/dt.

• The Korean Journal of Applied Statistics
• /
• v.31 no.5
• /
• pp.621-636
• /
• 2018

Research on the application of informative sampling technique has been conducted in order to reduce the influence of non-response. Chung and Shin (Korean Journal of Applied Statistics, 30, 993-1004, 2017) showed that the estimation accuracy improved when using exponential response rate information for the parameter estimation if the distribution of errors included in the super population model follows normal distribution. However this method divides the stratum into equally spaced substrata to obtain the sample weight of the informative sampling technique and shows that the accuracy of the estimation improves as the number of substrata increases. In this study, with the given number of total sample size, the optimal substratum boundary points are calculated using equal space, quantile, and LH algorithm; consequently, the results using those methods are compared through simulation. We also studied the criteria to determine the number of substrata and substratum boundaries that can be used in practice with various types of auxiliary variable distributions.

• Journal of the Korean Solar Energy Society
• /
• v.30 no.4
• /
• pp.9-14
• /
• 2010

The main cause of global warming is carbon dioxide generated from the use of fossil fuels, and active research on the reduction of carbon is in progress to slow down the increasing global warming. Wind turbines generate electricity from kinetic energy of wind and are considered as representative for an energy source that helps to reduce carbon emission. Since the kinetic energy of wind is proportional to the cube of the wind speed, the intensity of wind affects wind farm construction validity the most. Therefore, to organize a wind farm, validity analysis should be conducted first through measurement of the wind resources. To facilitate the approval and permission and reduce installation cost, measuring sensors should be installed at locations below the actual wind turbine hub. Wind conditions change in shape with air density, and air density is most affected by the variable sterrain and surface type. So the magnitude of wind speed depends on the ground altitude. If wind conditions are measured at a location below the wind turbine hub, the wind speed has to be extrapolated to the hub height. This correction of wind speed according to height is done with the Deacon equation used in the statistical analysis of previously observed data. In this study, the optimal Deacon equation parameter was obtained through the analysis of the correction of the wind speed error with the Deacon equation based on the characteristics of terrain.

• Journal of The Korean Association of Information Education
• /
• v.20 no.4
• /
• pp.323-332
• /
• 2016

A robot's recognition and diagnosis of pronunciation and its speech are the most important interactions in RALL(Robot Assisted Language Learning). This study is to verify the effectiveness of robot TTS(Text to Sound) technology in assisting Korean English language learners to acquire a native-like accent by correcting the prosodic errors they commonly make. The child English language learners' F0 range and speaking rate in the 4th grade, a prosodic variable, will be measured and analyzed for any changes in accent. We compare whether robot with the currently available TTS technology appeared to be effective for the 4th graders and 1st graders who were not under the formal English learning with native speaker from the acoustic phonetic viewpoint. Two groups by repeating TTS of RALL responded to the speaking rate rather than F0 range.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.48 no.2
• /
• pp.89-97
• /
• 2020

In this study, a numerical analysis was performed on 26 inch single and coaxial propeller using the ANSYS Fluent 19.0 Solver to analyse the effect of the distance between coaxial propellers as one of the design parameter. The Moving Reference Frame (MRF) method was used for single propeller, while the sliding mesh method was used for a coaxial propeller to analyse the flow field varying with azimuth angle. The thrust and power are decreased as the upper and lower propeller approaching each other. As H/D is increased, interference between the propellers is decreased. According to the flow field variable contour of the coaxial propeller, it appears that the change in aerodynamic performance is due to the loading effect and the tip vortex wake effect.

• ALGAE
• /
• v.32 no.4
• /
• pp.325-336
• /
• 2017

Intertidal community recovery and resilience were investigated with quantitative and qualitative perspectives as a function of disturbance timing. The study was conducted in a lower intertidal rock bed of the southern coast of South Korea. Six replicates of artificial disturbance of a $50cm{\times}50cm$ area were made by clearing all visible organisms on the rocky substrate in four seasons. Each of the seasonally cleared plots was monitored until the percent cover data reached the control plot level. There was a significant difference among disturbance timing during the recovery process in terms of speed and community components. After disturbances occurred, Ulva pertusa selectively preoccupied empty spaces quickly (in 2-4 months) and strongly (50-90%) in all plots except for the summer plots where non-Ulva species dominated throughout the recovery period. U. pertusa acted as a very important biological variable that determined the quantitative and qualitative recovery capability of a community. The qualitative recovery of communities was rapid in summer plots where U. pertusa did not recruit and the community recovery rate was the lowest in winter plots where U. pertusa was highly recruited with a long duration of distribution. In this study, U. pertusa was a pioneer species while being a dominant species and acted as a clearly negative element in the process of qualitative recovery after disturbance. However, the negative effect of U. pertusa did not occur in summer plots, indicating that disturbance timing should be considered as a parameter in understanding intertidal community resilience in temperate regions with four distinct seasons.

• Computers and Concrete
• /
• v.1 no.3
• /
• pp.325-354
• /
• 2004

Slabs in buildings and bridge decks, which are restrained against lateral displacements at the edges, have ultimate strengths far in excess of those predicted by analytical methods based on yield line theory. The increase in strength has been attributed to membrane action, which is due to the in-plane forces developed at the supports. The benefits of compressive membrane action are usually not taken into account in currently available design methods developed based on plastic flow theories assuming concrete to be a rigid-plastic material. By extending the existing knowledge of compressive membrane action, it is possible to design slabs in building and bridge structures economically with less than normal reinforcement. Recent research on building and bridge structures reflects the importance of membrane action in design. This paper describes the finite element modelling of membrane action in reinforced concrete slabs through optimisation of a simple concrete model. Through a series of parametric studies using the simple concrete model in the finite element simulation of eight fully clamped concrete slabs with significant membrane action, a set of fixed numerical model parameter values is identified and computational conditions established, which would guarantee reliable strength prediction of arbitrary slabs. The reliability of the identified values to simulate membrane action (for prediction purposes) is further verified by the direct simulation of 42 other slabs, which gave an average value of 0.9698 for the ratio of experimental to predicted strengths and a standard deviation of 0.117. A 'deflection factor' is also established for the slabs, relating the predicted peak deflection to experimental values, which, (for the same level of fixity at the supports), can be used for accurate displacement determination. The proposed optimised concrete model and finite element procedure can be used as a tool to simulate membrane action in slabs in building and bridge structures having variable support and loading conditions including fire. Other practical applications of the developed finite element procedure and design process are also discussed.

• The Journal of Korean Association of Computer Education
• /
• v.17 no.6
• /
• pp.147-159
• /
• 2014

This study aims to offer a wide range of practical implications for Smartphone addiction prevention by verifying the effect of mind health as a factor that is influenced by Smartphone addiction, and testing the relationships between Smartphone addiction and mind health with school life adaptation as a mediation effect. For this research, a survey was conducted of 250 elementary school students who use Smartphones. The relationships between Smartphone addiction, mind health and school life adaptation were set as the structural equation model, and they were verified by the mediation effect of school life adaptation. The results showed that school life adaptation turned out to be an entirely mediating variable on the relationship between mind health and Smartphone addiction. The statistical significance of the effect on school life adaptation was verified by the Sobel test. The mediation effect resulted in mind health reducing the occurrence of negative emotion of school life adaptation, and also reinforced decreased Smartphone use.