• Polymer(Korea)
• /
• v.25 no.2
• /
• pp.151-160
• /
• 2001

Polymeric membranes consisting of poly(d,1-lactide) as a polymer matrix and crystallizable progesterone as a drug were prepared by coagulating polymeric solutions. The homogeneous casting solutions in dimethyformamide were solidified by using three different coagulating processes : solvent evaporation under vacuum, solvent extraction via immersion into the nonsolvent bath, or vapor exposure at high humidity condition. With solvent removal via evaporation under vacuum, the cast solution film was vitrified to form a homogeneous film containing progesterone of spherical shape distributed evenly in the film. Being prepared by solvent extraction via immersion into a water bath, the resulting membrane showed an asymmetric structure, with progesterone of big crystallites distributed unevenly in the structure. On the other hand, the coagulation under high humidity transformed the cast film into a sponge-like structure, where progesterone took a shape like flake.

• Bulletin of the Korean Chemical Society
• /
• v.27 no.8
• /
• pp.1159-1163
• /
• 2006

Aluminum nanotube has been fabricated by a physical vapor deposition/atmospheric pressure injection using an anodic porous alumina film as a template. The pore external-, and inside diameters and the length of the aluminum nanotubes fabricated by this method are 60 nm, 35 nm and 2 $\mu$m, respectively. The structure of the fabricated aluminum nanotubes was examined by a kind of chemical treatment as extraction of copper on the cross-sectional area of these aluminum tubes in a mixed solution of $CuCl_2$ and HCl by difference of ionization tendency between aluminum and copper. The composition of the aluminum nanotube was identified by the two dimensional Hybrid Plasma Equipment Model (HPEM) employing the inductively coupled plasma.

• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 2004.09a
• /
• pp.286-289
• /
• 2004

On site, In situ soil remediation technologies are very important among the remediation technologies and in general efficiency of these technologies are turned to site characterization and environmental condition. specially using of only one technology has so many limitation factors. for example, existing state of tailing and channeling and so on. actually, filled land have high concentration cation exchange capacity because of existence in abundance soil organic matter. Therefore we used various on site in Situ technologies by phase for overcome the limitation factors. Target site is petroleum (diesel) impacted filled land and using technologies are SVE(Soil Vapor Extraction), BV(Bioventing), Bioremediation, Soil flushing, Chemical oxidation.

• Proceedings of the KSRS Conference
• /
• 2007.10a
• /
• pp.146-148
• /
• 2007

CMDPS (COMS Meteorological Data Processing System) is the operational meteorological products extraction system for data observed from COMS (Communication, Ocean and Meteorological Satellite) meteorological imager. CMDPS baseline products consist of 16 parameters including cloud information, water vapor products, surface information, environmental products and atmospheric motion vector. Additionally, CMDPS includes the function of calibration monitoring, and validation mechanism of the baseline products. The main objective of CMDPS validation module development is near-real time monitoring for the accuracy and reliability of the whole CMDPS products. Also, its long time validation statistics are used for upgrade of CMDPS such as algorithm parameter tuning and retrieval algorithm modification. This paper introduces the preliminary design on CMDPS validation module.

• Journal of environmental and Sanitary engineering
• /
• v.17 no.1
• /
• pp.52-56
• /
• 2002

The study was carried out to evaluate the characteristics of biodegradation by Pseudomonas putida G7 in soil column. The reactor system was used to investigate mass transfer of VOCs as Toluene in a column of unsaturated soil. Determination of the fate of VOCs in unsaturated soil is necessary to evaluate the feasibility of natural attenuation as a VOCs remediation strategy. The objective of this study was to develop a mechanistically based mathematical model that would consider the interdependence of VOC transport, microbial activity, and sorptive interactions in a moist, unsaturated soil. Because the focus of the model was on description of natural attenuation, the advective VOCs transport that is induced in engineered remediation processes such as vapor extraction was not considered. It can be concluded that the coefficient for gas liquid mass-transfer was found to be a key parameter controlling the ability of bacteria to VOCs. Finally, it appeared that bioremediation technology of VOCs which are difficult to be decomposed by chemical methods.

• 한국태양에너지학회:학술대회논문집
• /
• 2011.04a
• /
• pp.191-194
• /
• 2011

Low-grade waste heat has generally been discarded in industry due to lack of efficient recovery methods. In recent years, organic Rankine cycle(ORC) has become a field of intense research and appears as a promising technology for conversion of heat into useful work of electricity. In this work thermodynamic performance of ORC with superheating of vapor is comparatively assessed for various working fluids. Special attention is paid to the effects of system parameters such as the evaporating temperature on the characteristics of the system such as maximum possible work extraction from the given source, volumetric flow rate per 1 kW of net work and quality of the working fluid at turbine exit as well as thermal efficiency.

• Korean Journal of Medicinal Crop Science
• /
• v.8 no.1
• /
• pp.49-57
• /
• 2000

To understand the effects of drying conditions on changes of volatile compounds in fruits of Schizandra chinensis, we analyzed SDE (steam distillation and extraction) extract and Headspace vapor of fresh and dried samples using GC/MS (Gas chromatograph/Mass spectrometer). Contents of essential oils from samples with different drying conditions were 0.58% in fresh ones, 0.60% in freeze dried ones, and 0.30% in hot-air dried ones. In SDE extract, major volatile compounds in fresh samples were terpinen-4-ol(9.01%), ${\gamma}-terpinene(7.02%),\;{\beta}-myrcene(7.55%)$, unidentified sesquiterpenes(28.48%), showing almost the same composition as that in freeze-dried ones, but those in hot-air dried samples at $60^{\circ}C$ were ${\gamma}-terpinene(5.40%),\;{\alpha}-elemene(8.28%)$, unidentified sesquiterpenes(50.38%), indicating the chemical changes during drying procedure. In Headspace vapor, major compounds in fresh samples were ${\beta}-myrcene(22.05%),\;{\gamma}-terpinene(9.47%),\;{\alpha}-pinene(8.91%)$, sabinene(8.48%), which were different from those in SDE extract. In chemical compositions of volatile compounds in dried samples, ${\beta}-myrcene,\;{\alpha}-terpinene$ decreased in the order of freeze-drying > hot-air drying at $60^{\circ}C$ > hot-air drying at $60^{\circ}C$, and ${\alpha}-ylangene,\;{\alpha}-pinene$, camphene increased in the reverse order of the former. We observed the changes of the contents and compositions of essential oils compounds during drying procedure, especially a decrease in monoterpenes and alcohols and an increase in sesquiterpenes with relatively weak volatility.

• Journal of Soil and Groundwater Environment
• /
• v.9 no.1
• /
• pp.39-46
• /
• 2004

Removal efficiencies for diesel fuel and diesel hydrocarbons ($C_10$∼$C_22$) using microwave-enhanced SVE process were evaluated with dry and moist soil, respectively. Diesel removal rates of microwave-enhanced SVE process were 7 times for dry soil and 1580 times for moist soil as great as those of the SVE process without microwave heating. High dielectric property of water contents may accelerate the absorption of microwave energy into soil and thus vaporized the diesel fuel components drastically. The diesel removals were 67.7∼78.4% for $C_10$ and $C_12$, and 0∼18.5% for $C_14$∼$C_22$ for dry and moist soil with SVE process only. On the other hand, dry soil with microwave-enhanced SVE process showed 89.3∼99.4% removal for $C_10$ to and $C_12$ and 35.6∼67.0% for hydrocarbons over $C_14$. All hydrocarbons ($C_10$∼$C_22$) studied were significantly removed (93.6∼99.8%) for moist soil with microwave-enhanced SVE process.

• Journal of the Korean Chemical Society
• /
• v.38 no.12
• /
• pp.898-907
• /
• 1994

The solvent extraction of an inorganic trace mercury in sea water samples was studied using zinc diethyldithiocabamate $Zn(DDC)_2$ as chelating agent. The $Zn(DDC)_2$ which maintained the stability of DDC- in the acidic aqueous solution in the course of extraction was synthesized from NaDDC and $ZnSO_4$ in this laboratory. The trace of mercury(Ⅱ) was extracted at pH 3.0 from 100 ml of sea water into 10ml of chloroform containing 0.05 M $Zn(DDC)_2$ by shaking for 5 minutes. And from the organic phase, the $Hg(DDC)_2$ was back-extracted into 10ml of 1 to 1 mixed acid of each 3% (v/v) nitric acid and hydrochloric acid by shaking for 25 minutes. The mercury back-extracted was determined by a cold vapor atomic absorption spectrophotometry. The trace mercury(Ⅱ) was so successfully extracted that this procedure could be applied to its determination in the sea water. That is, the recoveries of mercury in two kinds of samples into which as given amount of Hg(Ⅱ) was spiked were 90.0% and 93.3%, respectively.

• Journal of the Korean GEO-environmental Society
• /
• v.9 no.2
• /
• pp.39-46
• /
• 2008

Due to the growth in industrialization, potential hazards in subsurface environments are becoming increasingly significant. The extraction of the contaminant from the soil and movement of the water are restricted due to the low permeability and adsorption characteristics of the reclaimed soils. There are a number of approaches to in-situ remediation that are used in contaminated sites for removing contaminants. These include soil flushing, dual phase extraction, and soil vapor extraction. Among these techniques, soil flushing was the focus of the investigation in this paper. Incorporated technique with PVDs has been used for dewatering from fine-grained soils for the purpose of ground improvement by means of prefabricated vertical drain systems. The laboratory model tests were performed by using the flushing tracer solutions for silty soils and recorded the tracer concentration changes with the elapsed time and flow rates. The modeling was intended to predict the effectiveness and time dependence of the remediation process. Modeling has been performed on the extraction, considering tracer concentration and laboratory model test characteristics. The computer model used herein are SEEP/W and CTRAN/W, this 2-D finite element program allows for modeling to determine hydraulic head and pore water pressure distribution, efficiency of remediation for the subsurface environment. It is concluded that the coefficient of permeability of contaminated soil is related with vertical velocity and extracted flow rate. The vertical velocity and extracted flow rate have an effect on dispersivity and finally are played an important role in-situ soil remediation.