• Proceedings of the Korean Radioactive Waste Society Conference
• /
• 2005.11b
• /
• pp.119-125
• /
• 2005

A method of predicting the tritium concentration in the air leaving an atmospheric detritiation dryer was modeled for designing a fixed bed dryer and preparing an advanced dryer control. In order to quantify the bed utilization and the dynamic capacity against an inlet humidity and a flow rate, a series of quantitative tests based on the break-through behavior were carried out in an isothermal fixed bed of synthetic zeolites such type as molecular sieve 4A, 5A, 13X and mordenite. The amount of water vapor breaking during the adsorption was estimated to give a breakthrough capacity at the various inlet flow rates and humidity conditions. The molecular sieve 13X exhibited a better adsorption performance at a given bed height.

• Journal of the Korean Society of Safety
• /
• v.11 no.1
• /
• pp.84-89
• /
• 1996

The adsorption characteristics of active carbon used as a cartridge filler of organic vapor respirator were examined by humidity, particle size, challenge concentration and specific surface area. As a result, the 1% breakthrough time of Carbon Tetrachloride($CCl_4$) was decreased with increase of relative humidity, challenge concentration and particle size (0.6～2.0mm) of active carbon. The adsorbed amount of $CCl_4$ was about 1. 1mg/$m^2$ at RH 40% and 0. 5mg/$m^2$ at RH 80% . However in the case of prehumidified active carbon, humidity did not affected to 1% breakthrough time up to RH 40%.

• Journal of Powder Materials
• /
• v.6 no.3
• /
• pp.238-245
• /
• 1999

The preparation of $n-TiO_2$ powder by the Chemical Vapor Synthesis process (CVS) was studied using the liquid metal organic precursor (TTIP). The residence time and the collection methods were considered as main processing variables through the experiments. The CVS equipment consisted of a micropump and a flashvaporizer, a tube furnace and a tubular collection device. The synthesis was performed at $1000^{\circ}C$ with various sets of collection zone. The residence time and the total system pressure were controlled in the range of 3~20 ms and 10 mbar, respectively. Nitrogen adsorption, X-ray diffraction and electron microscopy were used to determine particle size, specific surface area and crystallographic structure. The grain size of the as-prepared $n-TiO_2$ powder was in the range of 2~8 nm for all synthesis parameters and the powder exhibited only little agglomeration. The relationship between particle characteristics and the processing variables is reviewed based on simple growth model.

• Journal of the Korean Wood Science and Technology
• /
• v.20 no.4
• /
• pp.21-30
• /
• 1992

An activation energy equation for moisture diffusion in wood was developed with an assumption that activation energy is directly proportional to wood specific gravity. Theoretical activation energies obtained from the activation energy equation were revealed to be always lower than actual activation energies, which implies that activation energy isn't affected only by wood specific gravity. The other affecting factors are possibly anatomical structures of wood which determine a ratio of vapor diffusion to bound water diffusion in wood. For the convenience of estimating actual activation energy by using the activation energy equation, thirteen kinds of species were categorized into three groups according to their anatomical structures.

• Transactions of the Korean hydrogen and new energy society
• /
• v.14 no.2
• /
• pp.146-154
• /
• 2003

The hybrids of zeolite and metal hydride were prepared to improve the absorption properties as media for hydrogen storage. The zeolites which was deposited on the surface by metal hydride vapor showed excellent absorption properties and sodalite was proved to be better than zeolite-A in the reaction velocity and hydrogen storage capacity. This suggests the metal hydride could be used effectively as catalytic active material for enhancing the hydrogen storage in zeolite containing $\alpha$-cages and furthermore the hydrogen molecules have preference tobe occluded in their cavities containing $\alpha$-cages more effectively than that containing a and $\beta$-cages.

• Journal of the Korean Wood Science and Technology
• /
• v.10 no.4
• /
• pp.38-52
• /
• 1982

The effect of propylene oxide, butylene oxide, furan resin, and vinylpyrrolidinone in controlling wood dimensional stability have been examined. Wood in the green or ovendry condition was treated with various chemical treatments using a vacuum-pressure procedure, and treated specimens were tested for tangential sweelling, moisture gain, and changes in sorption hysteresis. Results' indicate that propylene oxide, and butylene oxide enhanced with the crosslin king agent trimethylol propane trimethacrylate and applied to ovendry wood were the most efficient chemical treatments in controlling tangential sweeling caused by liquid water or water vapor, and in reducing water vapor adsorption. The sorption behavior of treated wood as depicted by the ratios of sorption was "very favorable" in most instances. In the particular case of furan resin treatments, ratios of sorption were improved from 25 to 100 percent as compared to those of untreated wood.

• Journal of Environmental Science International
• /
• v.22 no.9
• /
• pp.1131-1139
• /
• 2013

Desorption characteristics of VOCs were investigated for the effective recovery of gasoline vapor. The adsorption capacity and desorption capacity were excellent at relatively low temperatures. The differences in the desorption capacity were not large in the condition; desorption temperature $25^{\circ}C$, desorption pressure 760 mmHg, inlet air flow rate 0.5 L/min, but were relatively great in the condition; desorption temperature $0^{\circ}C$, desorption pressure 60 mmHg, inlet air flow rate 1.0 L/min. The desorption ability of pentane was increased to about 81.4%, and the desorption ability of hexane was increased to about 102%, also the desorption ability of toluene was increased to about 156.7% by changes of temperature, pressure, inlet air flow rate in the experimental conditions. The optimum desorption condition for the effective recovery of VOCs was in the conditions; desorption temperature $0^{\circ}C$, desorption pressure 60 mmHg, inlet air flow rate 1.0 L/min.

• Carbon letters
• /
• v.14 no.3
• /
• pp.186-189
• /
• 2013

We report a highly sensitive $NO_2$ gas sensor based on multi-layer graphene (MLG) films synthesized by a chemical vapor deposition method on a microheater-embedded flexible substrate. The MLG could detect low-concentration $NO_2$ even at sub-ppm (<200 ppb) levels. It also exhibited a high resistance change of ~6% when it was exposed to 1 ppm $NO_2$ gas at room temperature for 1 min. The exceptionally high sensitivity could be attributed to the large number of $NO_2$ molecule adsorption sites on the MLG due to its a large surface area and various defect-sites, and to the high mobility of carriers transferred between the MLG films and the adsorbed gas molecules. Although desorption of the $NO_2$ molecules was slow, it could be enhanced by an additional annealing process using an embedded Au microheater. The outstanding mechanical flexibility of the graphene film ensures the stable sensing response of the device under extreme bending stress. Our large-scale and easily reproducible MLG films can provide a proof-of-concept for future flexible $NO_2$ gas sensor devices.

• Applied Chemistry for Engineering
• /
• v.9 no.6
• /
• pp.798-802
• /
• 1998

Carbon granules were prepared by granulating a mixture of coconut shell powder and coal tar solution, and then by carbonizing at different temperatures. To control micropores of the carbonized granules, the deposition time of benzene vapor under nitrogen atmosphere was varied. For each prepared sample, SEM morphology and true density were investigated. The adsorption rates on the granules were measured with respect to oxygen and nitrogen by means of the Cahn D-200 system. Diffusivity, selectivity and amount of equilibrium adsorption for the gases were obtained from the measurement of adsorption rate. Based on the analysis of the adsorption characteristics, the optimum temperature and the deposition time for preparation of the molecular sieve carbon granules were found to be $800^{\circ}C$ and 10 minutes, respectively. At these optimal conditions, the selectivity coefficient, 26.4, 0f oxygen and nitrogen was obtained.

• Korean Chemical Engineering Research
• /
• v.53 no.3
• /
• pp.339-349
• /
• 2015

In this work, DAY (Dealuminated Y-type) zeolites were prepared to be used as easily regenerable and thermally stable adsorbent substituting activated carbon. NaY zeolites were transformed into DAY zeolites through ion exchange, calcination, steaming, and acid leaching. Calcination temperature and time, and steaming time were changed to increase the Si/Al ratio and maintain crystallinity. Adsorption of VOCs were done for prepared DAY, commercial NaY and Hisiv 1000 in air with relative humidity of 50%. The DAY zeolite prepared by calcination at $520^{\circ}C$ for 4 hrs and steaming for 7 hrs had a same structure and a Si/Al ratio of 80.4. Its adsorption capacity for water vapor was 10% of NaY, indicating its hydrophobicity. Its adsorption capacity for MEK was 0.8 times of Hisiv 1000, that for toluene 1.6 times, and that for EA 1.3 times.