• 대한수학회보
• /
• 제49권5호
• /
• pp.961-987
• /
• 2012

A compartment model of the flow driven by pumping without valves (valveless pumping) in an open tank system is proposed. By the open tank system, we mean that two rigid cylindrical tanks are connected with an elastic tube. An incompressible fluid fills this system up to a certain level in tanks under the gravity. The compartment model for analyzing such open system is derived from the energy principle which will be called the energy conserving compartment model or shortly the ECCM. Based on this ECCM of valveless pumping, we explore the occurrence of directional net flow or directional net power by a specific excitation at an asymmetric part of the elastic tube. The interaction between deformable elastic tube and the fluid inside is considered in the ECCM. The reliability of the ECCMis investigated through some physical examples. The ECCM shows the existence of directional net power of the valveless pump system with open tanks and confirms that the direction and magnitude of the net power depend on the pumping frequency as well. Furthermore, the phase synchronization in time between the fluid pressure difference and the external pinching force over the pumping region is highly related to the direction of energy storing or net power.

• Journal of the Korean Society for Industrial and Applied Mathematics
• /
• 제15권2호
• /
• pp.97-122
• /
• 2011

Fluid dynamics driven by pumping without valves (valveless pumping) shows interesting physics. Especially, the driving function to generate valveless pump mechanism is one of important factors. We consider a closed system of valveless pump which consists of flexible tube part and stiffer part. Fluid and structure (elastic tube) interaction motions are generated by the periodic compress-and-release actions on an asymmetric location of the elastic loop of tubing. In this work, we demonstrate how important the driving forcing function affects a net flow in the valveless circulatory system and investigate which parameter set of the system gives a more efficient net flow around the loop.

• 대한기계학회논문집B
• /
• 제37권2호
• /
• pp.111-117
• /
• 2013

탄성튜브가 연결된 펌핑 챔버를 이용한 무밸브 펌프를 가상경계방법을 이용하여 수치적으로 연구하였다. 탄성 튜브와 펌핑 챔버 사이의 상호작용으로 인하여 무밸브 펌프 내의 유동이 생성되었으며, 탄성튜브의 스트레칭 계수, 벤딩 계수, 종횡비가 무밸브 펌프의 전체 유량에 미치는 영향을 살펴보았다. 펌프의 메커니즘을 이해하고자, 시간에 따른 탄성 튜브의 움직임과 그에 따른 유동 속도의 변화를 자세히 살펴보았으며, 탄성 튜브의 직경 크기와 펌프의 평균 유량 사이의 관계를 분석하였다.

• 대한수학회보
• /
• 제52권6호
• /
• pp.1973-2000
• /
• 2015

In this study, we present a multidimensional open system for valveless pumping (VP). This system consists of an elastic tube connected to two open tanks filled with a fluid under gravity. The two-dimensional elastic tube model is constructed based on the immersed boundary method, and the tank model is governed by a system of ordinary differential equations based on the work-energy principle. The flows into and out of the elastic tube are modeled in terms of the source/sink patches inside the tube. The fluid dynamics of this system is generated by the periodic compress-and-release action applied to an asymmetric region of the elastic tube. We have developed an algorithm to couple these partial differential equations and ordinary differential equations using the pressure-flow relationship and the linearity of the discretized Navier-Stokes equations. We have observed the most important feature of VP, namely, the existence of a unidirectional net flow in the system. Our computations are focused on the factors that strongly influence the occurrence of unidirectional flows, for example, the frequency, compression duration, and location of pumping. Based on these investigations, some case studies are performed to observe the details of the ow features.

• 한국유체기계학회 논문집
• /
• 제11권3호
• /
• pp.14-21
• /
• 2008

A numerical simulation on the flow field of a valveless bidirectional piezoelectric micropump has been performed. In this type of micropump, the oscillation of the piezoelectric diaphragm generates the blowing and suction flow through the oblique channel from the pumping chamber. The angle between the oblique and main channel causes the variation of flow distribution through upstream and downstream channels in suction and blowing modes. In the suction flow mode, the working fluid flows from both the upstream and downstream of the main channel to the pumping chamber through the oblique channel. However, in the blowing flow mode, the fluid pushed out of the pumping chamber flows more toward the downstream of the main channel due to the inertia of the fluid. In the present study, the effects of geometries such as the angle of oblique channel and the shape of main channel on the flow rate of the up/downstream were investigated. The flow rate obtained from the pump and the energy required to the pump were also analyzed for various displacements and frequencies of the oscillation of the diaphragm.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회B
• /
• pp.2672-2677
• /
• 2007

An investigation of low Reynolds number flow in nozzles and diffusers which are widely used in the valveless micropump is presented. Flow characteristics in the nozzle and diffuser are explained in view of viscous effect and flow oscillation induced by pumping membrane. These calculation results show that the rectification property of valveless micropump is due to a flow separation in the diffuser and the separation is largely originated from the flow oscillation. Under the assumptions of steady flow velocity profile and flow separation in the diffuser, simplified analytical models are provided to see the dependency of rectification on the micropump geometry. Geometric parameters of channel length, nozzle throat, chamber size, and converging/diverging angle are depicted through the analytical models in low Reynolds number flow, and the prediction and experimental results are compared. This theoretical study can be used to determine the optimum geometry of valveless micropump.

• 한국항공우주학회지
• /
• 제36권1호
• /
• pp.7-13
• /
• 2008

본 논문에서는 유한요소법을 기반으로 한 소프트웨어 COMSOL Multiphysics를 이용하여 압전 복합재료 작동기를 이용하여 제작한 무밸브 마이크로펌프의 성능을 연구하였다. 압전 마이크로펌프는 4층의 경량 압전 복합재료 작동기, PDMS으로 된 챔버와 2개의 디퓨저로 이루어졌다. 시뮬레이션에서는 압전 재료 영역, 구조 영역과 유체 영역을 완전 연성하여 해를 계산하였다. 물을 유체로 사용하였으며, 유량을 마이크로펌프의 구조적 파라미터에 대하여 계산하였다. 이 연구에 기초하여 보다 성능이 좋은 마이크로펌프를 제시하였다.

• KSTLE International Journal
• /
• 제3권2호
• /
• pp.101-109
• /
• 2002

This paper presents the fabrication and performance inspection of a peristaltic micropump by flow simulation. The valve-less micropump using the diffuser/nozzle is consists of base plate, mid plate, top plate and connection tubes fur inlet and outlet. In detail, the base plate is composed of two diffuser nozzles and three chambers, the mid plate consists of a glass diaphragm for the volumetric change of the pumping chamber. The inlet and outlet tubes are connected at the top plate and the actuator fur pressing the diaphragm is located beneath the top plate. The micropump is fabricated on the silicon wafer by DRIE (Deep Reactive ion Etching) process. The pumping performances are tested by the pneumatic test rig and compared with the simulated results fur various dimensions of diffuser nozzles. The pumping characteristics of the micropump by the volumetric change at the pumping chamber is modeled and simulated by the commercial software of FLOW-3D. The simulated results shows that reverse flow is the inherent phenomena in the diffuser nozzle type micropump, but it can be reduced at the dual pumping chamber model.

• 대한기계학회논문집B
• /
• 제30권4호
• /
• pp.350-357
• /
• 2006

A new valveless micropump for bi-directional application has been developed and tested. The micropump was fabricated on silicon and glass substrates by micromachining process. The micropump in this study consists of a membrane actuator, a pumping chamber, fluidic channels and two piezoelectric ceramic films. The channels and pumping chamber were etched on a glass wafer and the membrane was made on a silion wafer which is actuated by a piezoelectric ceramic (PZT) film. The geometry of the micropump was optimized by numerical analysis and the performance of the micropump was investigated by the experiments. The maximum flow rate was $323{\mu}L/min$ and the maximum back pressure was 294 Pa when the membrane actuator of $10{\times}10mm^2$ was driven at 130 Hz and 385 V.

• 한국항공우주학회지
• /
• 제37권8호
• /
• pp.744-750
• /
• 2009

본 논문에서는 압전 작동기로 구동되는 무밸브 마이크로 펌프의 펌프 성능을 계산하였다. 선행연구에서 개발된 마이크로 펌프는 4층의 경량 압전 복합재료 작동기, PDMS로 된 챔버와 2개의 디퓨져로 이루어져 있다. 유한요소 해석은 압전 영역, 구조 영역 및 유체 영역을 완전 연성하여 수행되었다. 구조 및 압전 영역의 해석은 ANSYS를 사용하였으며, 유체영역의 해석은 ANSYS CFX를 사용하여 수행하였다. 작동 주파수가 10 Hz와 40 Hz인 경우에 대한 해석을 수행하여 작동 주파수가 유동 특성에 미치는 영향을 고찰하였다. 또한 300 Hz까지의 유동 해석을 통하여 작동 주파수에 따른 유량을 계산하였다.