• Journal of ILASS-Korea
• /
• v.4 no.3
• /
• pp.32-41
• /
• 1999

In this research, internal-mixing twin-fluid atomizer using sonic energy is designed and manufactured. We are trying to intimate high efficiency twin-fluid atomizer to obtain good liquid atomization in the low pressure region. Define of geometric form of atomizer, characteristics of spray is influenced by position, depth and height variation of cavity resonator, variation of sound intensity and resonant sound frequency with liquid flow rate. The liquid atomization is promoted by multi-stage disintegration of mixing flow of gas with liquid and the optimum condition of position and depth of cavity resonator according to sonic energy is obtained from the condition at a=2.5mm and L=2mm. The velocity distribution of droplets shows negative value due to recirculation region at the center of axial, and as the radial direction distance is far, the velocity distribution of droplets decrease slowly after having a maximum value. However velocity and SMD show nearly uniform distribution at the down stream and as result compared to Nukiyama and Tanasawa's equation. atomization of mixing flow with air and liquid dispersing from the outlet of the nozzle is promoted by the effect of collision at the cavity resonator.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2003.05a
• /
• pp.65-71
• /
• 2003

This research deals with how to select connection positions of two substructures to be synthesized. The goal of this research is to find optimal connection positions in order to maximize the fundamental natural frequency of the synthesized structure. The natural frequencies of a connected structure are obtained by modal-force equations. Optimal connection positions can be selected through optimization process. In the optimization process, the natural frequencies of a connected structure are set to object function value and connection positions become design variables. The method described above is applied to synthesis problems of plates, which is initially conducted for FE models and verified through experiments. Especially in experiments, FRE(frequency Response function)s are obtained by means of the Modal Testing technique to be used in modal-force equations for synthesizing. Once the substructures are synthesized, the Modal Testing technique is again applied to spot-welded structure using the result from the optimization procedure. It is found that the fundamental natural frequency of the synthesized structure with the optimized result gives higher value than those with the initially given connection positions.

• Journal of Oral Medicine and Pain
• /
• v.18 no.1
• /
• pp.31-43
• /
• 1993

To evaluate the correlationship between sign/symptoms of craniomandibular disorder(CMD) and possible contributing occlusal factors, the author analyzed craniomandibular index(CMI), clinical dysfunction index(CDI) and occlusal index(Oi) obtained from 88 subjects (32 males, 56 females, mean age 28.7) consisted of 49 CMD patients(15 males, 34 females, mean age 28.7) and 39 non-CMD patients (17 males, 22 females, mean age 24.5). The obtained results were as follows : 1. There was very high significant correlation bebween CMI and CDI in total subjects (r=0.83, p<0.01) 2. There was very low correlation between working-side interference and TMJ noise which was observed as a statistically significant value(p<0.05). And also there ws very low correlation between nonworking side interference and muscle tenderness, CDI, dysfunction index(DI), palpation index(PI) which were observed as statistically significant value (p<0.01) 3. There was very low correlation between as ymmetry of tetruded contact position(RCP)-intercuspal position(ICP) slide and muscle tenderness, TMJ tenderness, TMJ noise, CMI, DI, PI which were observed as statistically significant values(p<0.05) 4. In general there was low correlation between Oi and muscle tenderness, CDI, CMI, DI, PI which were observed as statistically significant values (p,0.05). But Oi had a relatively higher correlation with muscle tenderness, PI than whith CDI, DI.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.2
• /
• pp.712-717
• /
• 2011

Option issuers generally utilize Dynamic Delta Hedging(DDH) technique to avoid the risk resulting from continuously changing option value. DDH duplicates payoff of option position by adjusting hedge position according to the delta value from Black-Scholes(BS) model in order to maintain risk neutral state. DDH, however, is not able to guarantee optimal hedging performance because of the weaknesses caused by impractical assumptions inherent in BS model. Therefore, this study presents a methodology for dynamic option hedge using artificial neural network(ANN) to enhance hedging performance and show the superiority of the proposed method using various computational experiments.

• Korean Journal of Applied Biomechanics
• /
• v.15 no.3
• /
• pp.61-70
• /
• 2005

The purpose of study was to investigate the kinematic variables of Kenmotsu motion in Parallel bars. To this study, by 3 dimensional kinematical analysis of 4 male national gymnasts participants in the 28th Athens Olympic Game in 2004, kinematic data collected using video camera. Coordinate data were smoothed by using a fourth-order Butterworth low pass digital filter with cutoff frequency of 6Hz. The conclusions were as follows. 1. In P2, because the constrained swing movement made the movement of a rising back difficult7, the movements of Reg. were performed at low position after Air phase. 2. In E5 event, for the shake of a stable handstand and applied techniques like a Belle(E-value), a Belle Piked(super E-value), a vertical velocity in E2, a horizontal velocity in E3 and a vertical velocity in E4 were necessary for high velocities. 3. In E4 event, it was appeared that for a flexible body's movement of a vertical up-flight, the large angle of the shoulder joint and the flexion & extension of the hip joint were necessary in Air phase and a long flight time and vertical displacement made Reg. movements stable at the high position.

• Journal of the Korean Society of Industry Convergence
• /
• v.22 no.6
• /
• pp.657-664
• /
• 2019

While the 4^th Industrial Revolution (4^th IR) is actively being discussed in Korea, the core and common point is that in the era of the 4^th IR, computer networking is becoming more common due to the generalization of ICT(Information and Communication Technology). There may be a variety of factors that have allowed ICT to occupy a core position in the 4^th IR, but the most important may be the position of ICT as a foundation technology. ICT has important technical value in itself, but when it is converged with other technology or industry, or when it acts as a foundation technology of such technology or industry, it greatly improves the value of existing technology or industry. Thus, this paper focused on ICT, the core technology of the 4^th IR, to examine the past, present and future of ICT-related R&D and ICT-based convergence industries. In other words, the purpose of this study is to identify which areas ICT has been actively researched from past to present and what changes have been made in such areas.

• Journal of the Korea Society of Computer and Information
• /
• v.26 no.12
• /
• pp.11-18
• /
• 2021

This paper shows the applicability of deep learning algorithm in predicting target position and getting correction value of impact point in order to improve the accuracy of naval gun firing. Predicting target position, the proposed model using LSTM model and RN structure is expected to be more accurate than existing method using kalman filter. Getting correction value of impact point, the another proposed model suggests a reinforcement model that manages factors which is related in ballistic calculation as data set, and learns using the data set. The model is expected to reduce error of naval gun firing. Combining two models, a ballistic calculation model for improving accuracy of naval gun firing based on deep learning algorithm was designed.

• Journal of the Korea Society of Computer and Information
• /
• v.26 no.6
• /
• pp.37-46
• /
• 2021

In this paper, we designed and implemented a program to measure and to judge the accuracy of yoga postures using Azure Kinect. The program measures all joint positions of the user through Azure Kinect Camera and sensors. The measured values of joints are used as data to determine accuracy in two ways. The measured joint data are determined by trigonometry and Pythagoras theorem to determine the angle of the joint. In addition, the measured joint value is changed to relative position value. The calculated and obtained values are compared to the joint values and relative position values of the desired posture to determine the accuracy. Azure Kinect Camera organizes the screen so that users can check their posture and gives feedback on the user's posture accuracy to improve their posture.

• Health Policy and Management
• /
• v.33 no.2
• /
• pp.129-140
• /
• 2023

Background: This study aims to compare the burden of disease in Korea with other Organization for Economic Cooperation and Development (OECD) countries using the OECD health statistics from 1985 to 2020. Methods: We analyzed potential years of life lost (YLL) per 100,000 population using the Positive value for relative comparison (PARC) index, trend test, and average annual percentage change (AAPC) with logistic regression analysis. Results: The relative disease burden was good for many diseases, but the disease burden was severe for a few diseases in Korea. Diseases with a high relative burden of disease in Korea are as follows; intentional self-harm (YLL2020 575.6, AAPCYLL 2.6%; PARC2020 -1.000, AAPCPARC -15.8%), malignant neoplasms of the liver (YLL2020 136.6, AAPCYLL -3.9%; PARC2020 -1.000, AAPCPARC 0.0%), malignant neoplasms of the stomach (YLL2020 9.0, AAPCYLL 3.2%; PARC2020 -0.556, AAPCPARC -22.9%), Parkinson's disease (YLL2020 575.6, AAPCYLL 2.6%; PARC2020 -1.000, AAPCPARC -15.8%). Conclusion: Diseases with a high burden of disease are needed to be prioritized in the planning and execution of healthcare policies that can contribute to the efficient use of healthcare resources.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2005.06a
• /
• pp.1381-1384
• /
• 2005

In these days, the piezoresistive material has been applied to various sensors in order to measure the change of physical quantities. But the relationship between the sensitivity of a sensor and the position and size of piezoresistor has rarely been studied. Therefore, this paper was focused on the distribution of the resistance change ratio on the diaphragm and bridge surface where piezoresistor would be formed, and proposed the proper size and position of piezoresistor with which the sensitivity of sensor was increased. As the width of mass and boss was increased, the distance between piezoresistors was closed and the maximum value of resistance change ratio was decreased by the increase of the structure stiffness. And according to the increment of seismic mass size, the value of resistance change ratio is decreased by increase of the structure stiffness. Y directional piezoresistor is formed in the position of $100\mu{m}\;apart\;from\;cantilever\;edge\;and\;length\;of\;that\;is\;800\mu{m}$.