• Proceedings of the Korean Vacuum Society Conference
• /
• 1998.02a
• /
• pp.178-178
• /
• 1998

Bacuum ppower tubes (gyrotron klystron gyro-klystron etc) are attractive for high ppower applications such as radar/communications pplasma heating accelrator naterial pprocessing etc. Over the ppast two decades considerable efforts on the developpment of gyrotron-ppower coherent microwave and millimeter wave sources were made. Expperimental pperformance on the gyro-devices will be ppresented.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2008.08a
• /
• pp.356-356
• /
• 2008

• Journal of the Korean Vacuum Society
• /
• v.14 no.4
• /
• pp.180-185
• /
• 2005

The possibility of generation of the vacuum scale using the vapour pressure of water was evaluated. The range of vacuum from 3.3 kPa to 101.3 kPa was corresponds the vapour pressure of water in the temperature range from $25^{\circ}C$ to $100^{\circ}C$ The measured values of the vapour pressure of water were agreed within the deviation of $5\%$ comparing to reference value. This result shows the vapour pressure of water can be used as an secondary reference of the vacuum scale. Moreover it shows the thermo-dynamical properties such as, triple point, temperature-pressure curve of a material have a applicability in the vacuum scale as a reference in corresponding range of vacuum.

• Journal of the Korean Vacuum Society
• /
• v.15 no.6
• /
• pp.547-555
• /
• 2006

The Pohang Light Source (PLS) of Pohang Accelerator Laboratory (PAL), which was constructed in 1994, is a 3rd generation synchrotron light source user facility. It consists of 2.5 GeV linear accelerator and a storage ring with circumference of 280 m. Presently, 27 beamlines around the storage ring are in operation providing synchrotron radiations to users. In addition, PAL has a construction project of the 4th generation light source. In this paper, the operation status of the PLS is described and the prospect of the 4th generation light source is reviewed.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2004.08a
• /
• pp.59-60
• /
• 2004

• Proceedings of the Korean Vacuum Society Conference
• /
• 2006.08a
• /
• pp.214-214
• /
• 2006

• Vacuum Magazine
• /
• v.3 no.2
• /
• pp.4-10
• /
• 2016

Photovoltaic technology has been intensively developed as one of the most powerful renewable energies, replacing a fossil fuel such as coal and petroleum. Every country in the world has emphasized on development of photovoltaic technology and our government has invested heavily in low cost and high efficiency. Korea institute of industrial technology (KITECH) has lastingly constructed PV R&D infra for development of cost-effective and high efficiency solar cells as well as support of commercialization in PV's small and medium enterprises. In this paper, we introduce the next generation PV R&D and infra in KITECH.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2014.02a
• /
• pp.151.1-151.1
• /
• 2014

Wake field effect on the electron beam from the undulator chamber in PAL-XFEL is analyzed. The wake field takeover some energy from the electron beam which will increase the energy spread of the electron beam. This will cause the degradation of the radiation power in PAL-XFEL. To decrease the effect, the surface of the undulator vacuum chamber should be fabricated with 200 nm surface roughness and 5 nm oxidation layer. In this presentation, the numerical calculation of the wake will be shown. Simulation results of the radiation generation in PAL-XFEL also will be presented.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2004.10a
• /
• pp.912-915
• /
• 2004

A vacuum environment is very important for NGL(Next Generation Lithography) apparatuses such as EUVL(Extreme Ultra Violet Lithography) or EPL(Electron Projection Lithography) and so on. The performance of these systems is dominated by vacuum level of processing and positioning accuracy of a stage. So, ultra-precision stage usable in a high vacuum level is needed for the improved performance of these devices. In contrast to atmospheric condition, a special attention must be paid to guide bearing, actuator and other elements. In this paper, air bearing is adopted because of its very high motional accuracy. So, air bearing is designed to be vacuum compatible using differential exhaust method, which prevents air from entering into vacuum chamber. For this, leakage analysis is performed theoretically and verified from experiment.

• Environmental Engineering Research
• /
• v.12 no.3
• /
• pp.109-117
• /
• 2007

The characteristics of carbonaceous particles collected from the combustion of Vacuum Residue (VR) in a test furnace have been investigated. The physical and chemical characterization includes particle size, scanning electron microscopy of the surface structure, measurement of porosity, surface area and density, EDX/XRD analyses and measurement of chemical composition. The studies show that the carbonaceous VR particles are very porous and spheroidal, and have many blow-holes on the surface. The particles become smaller and more sponge-like as the reaction proceeds. The present porosity of VR particles is similar to that of cenospheres from the combustion of heavy oil, and the majority of pores are distributed in macro-pores above $0.03\;{\mu}m$ in diameter. Measurements of pore distribution and surface area showed that the macro-pores contributed most to total pore volume, whereas the micro-pores contributed to total surface area.