• Analytical Science and Technology
• /
• v.15 no.3
• /
• pp.263-269
• /
• 2002

After porous filters were manufactured using cordierite powder whose mean particle size was 200 ${\mu}m$, they were loaded with catalysts such as Pt, Pd, Cu, Co, La, $V_2O_5$ by vacuum impregnation method. And we investigated the activity of catalysts used for catalytic oxidation of VOC by passing toluene through catalyst-loaded filters. The porous filters had the apparent porosity of 62%, the compressive strength of about 10 MPa and the pressure drop of 15 mmHg at the face velocity of 5 cm/sec. The loading of catalyst decreased the porosity of the filters and increased the pressure drop and the compressive strength of them. Among the catalysts, Pt had the highest activity for catalytic oxidation and could remove more than 90% of toluene at 250 $^{\circ}C$. Below 250 $^{\circ}C$, the content of Pt catalyst had an influence on the conversion of toluene but didn't show any influence above 250 $^{\circ}C$.

• Journal of the Korean Magnetics Society
• /
• v.17 no.3
• /
• pp.141-146
• /
• 2007

A new class of LC-resonator for micro magnetic sensor device was invented and fabricated by means of MEMS technique. The micro LC-resonator consists of a solenoidal micro-inductor with a bundle of soft magnetic microwire cores and a capacitor connected in parallel to the micro-inductor. The core magnetic material is a tiny glass coated $Co_{83.2}B_{3.3}Si_{5.9}Mn_{7.6}$ microwire fabricated by a glasscoated melt spinning technique. The core materials were annealed at various temperatures $150^{\circ}C,\;200^{\circ}C\;,250^{\circ}C\;,$ and $300^{\circ}C$ for 1 hour in a vacuum to improve soft magnetic properties. The solenoidal micro-inductors fabricated by MEMS technique were $500{\sim}1,000{\mu}m$ in length with $10{\sim}20$ turns. The changes of inductance as a function of external magnetic field in micro-inductors with properly annealed microwire cores were varied as much as 370%. Since the permeability of ultra soft magnetic microwire is changing rapidly as a function of external magnetic field. The inductance ratio as well as magnetoimpedance ratio (MIR) in a LC-resonator was varied drastically as a function of external magnetic field. The MIR curves can be tuned very precisely to obtain maximum sensitivity. A prototype magnetic sensor device consisting of the developed microinductors with a multivibrator circuit was test successfully.

• Journal of the Korean Society of Industry Convergence
• /
• v.7 no.3
• /
• pp.259-263
• /
• 2004

In the manufacture progress of LCD or semiconductor, there are used many kinds of gas like erosion gas, dilution gas, toxic gas as a progress which used these gas there are required high puritize to increase accumulation rate of semiconductor or LCD materials work progress of semiconductor or LCD it demand many things like the material which could minimize metallic dust that could be occured by reaction between gas and transfer pipe laying material, illumination of the surface, emition of the gas, metal liquation, welding etc also demand quality geting stricted. Material-Low-sulfur-contend (0.007-0010), vacuum-arc-remelt(VAR), seamless, high-purity tubing material is recommend for enhance welding lower surface defect density All wetted stainless steel surface must be 316LSS elecrto polishinged with ${\leq}0.254{\mu}m$($10.0{\mu}in$) Ra average surface finish, $Cr/Fe{\geq}1.1$ and $Cr_2O_3$ thickness ${\geq}25{\AA}$ From the AES analytical the oxide layer thickness (23.5~36 angstroms silicon dioxide equivalent) and chromum to iron ratios is similar to those generally found on electropolished stainless steel., molybdenum and silicon contaminants ; elements characteristic of stainless steel (iron, nickel and chromium); and oxygen were found on the surface Phosphorus and nitrogen are common contaminants from the electropolish and passivation steps.

• Korean Journal of Materials Research
• /
• v.23 no.9
• /
• pp.501-509
• /
• 2013

To evaluate the development of the microstructure and mechanical properties on surface modified and post-heattreated Inconel 718 alloy, this study was carried out. A friction stir process as a surface modification method was employed, and overlap welded Inconel 718 alloy as an experimental material was selected. The friction stir process was carried out at a tool rotation speed of 200 rpm and tool down force of 19.6-39.2 kN; post-heat-treatment with two steps was carried out at $720^{\circ}C$ for 8 h and $620^{\circ}C$ for 6 h in vacuum. To prevent the surface oxidation of the specimen, the method of using argon gas as shielding was utilized during the friction stir process. As a result, applying the friction stir process was effective to develop the grain refinement accompanied by dynamic recrystallization, which resulted in enhanced mechanical properties as compared to the overlap welded material. Furthermore, the post-heat-treatment after the friction stir process accelerated the formation of precipitates, such as gamma prime (${\gamma}^{\prime}$) and MC carbides, which led to the significant improvement of mechanical properties. Consequently, the microhardness, yield, and tensile strengths of the post-heat-treated material were increased more than 110%, 124% and 85 %, respectively, relative to the overlap welded material. This study systematically examined the relationship between precipitates and mechanical properties.

• Journal of Biosystems Engineering
• /
• v.34 no.6
• /
• pp.470-475
• /
• 2009

This study was performed to present the diagnosis basis of cooling performance deficiency according to air quantity included in refrigerant of air-conditioner by detecting the temperatures and pressures of refrigerant pipeline. The car air-conditioner of SONATA III (Hyundai motor Co., Korea) was tested by maximum cooling condition at 1500 rpm of engine speed in the room with controlled air condition at $33\sim35^{\circ}C$ and 55~57% RH. Measured variables were temperature differences between inlet and outlet pipe surface of the compressor (Tcom), condenser (Tcon), receive dryer (Trec) and evaporator (Teva), and high pressure (HP) and low pressure (LP) in the refrigerant pipeline, and temperature difference (Tcoo) between inlet and outlet air of the cooling vent of evaporator. Control variables were the refrigerant charging weight and the vacuum degree in the refrigerant pipeline before charging refrigerant. From the test, it was represented that the measuring values of (Tcom), LP and (Tcoo) were enabled to make the diagnosis of cooling performance deficiency according to quantity included in refrigerant of air-conditioner. The ranges of Tcom, LP and Tcoo to make the diagnosis of cooling performance deficiency were respectively less than $55^{\circ}C$, more than 166.7 kPa-g(1.7 kgf/$cm^2$) and less than $13.7^{\circ}C$. In the case of using only external sensors and the condition under the normal performances of air conditioner, it was considered that the ranges of LP and Tcoo to make the diagnosis of cooling performance deficiency were respectively more than 166.7 Pa and less than $12^{\circ}C$.

• Journal of Powder Materials
• /
• v.22 no.6
• /
• pp.408-412
• /
• 2015

This study attempts to manufacture a Ni-Cr-Al-Y coating layer using a kinetic spray process and investigates the microstructure and physical properties of the manufactured layer. The Ni-22Cr-10Al-1Y (wt.%) composition powder is used, and it has a spherical shape with an average diameter of $23.7{\mu}m$. Cu plate is used as the substrate. Optical microscope, X-ray diffraction, scanning electron microscope and Vickers hardness test are carried out to characterize the macroscopic properties of the coating layer. Furthermore, the coating layer underwent vacuum heat treatment at temperatures of $400^{\circ}C$ and $600^{\circ}C$ for 1 hour to check the effect of heat treatment temperature on the properties. The manufactured coating layer is 1.5 mm thick, and featured identical phases to those found in the powder. The porosity of the coating layer is measured at 2.99%, and the hardness is obtained at $490.57H_v$. The layer shows reduced porosity as heat treatment temperature increased, and hardness is reduced at $400^{\circ}C$ but shows a slight increase at $600^{\circ}C$. Based on the findings described above, this study also discusses possible manufacturing methods for a Ni-Cr-Al-Y coating layer using the kinetic spray process.

• Journal of the Speleological Society of Korea
• /
• no.76
• /
• pp.37-42
• /
• 2006

The Dielectric Barrier Discharge (DBD) is a nonequilibrium gas discharge that is generated in the space between two electrodes, which are separated by an insulating dielectric layer. The dielectric layer can be put on either of the two electrodes or be inserted in the space between two electrodes. If an AC or pulse high voltage is applied to the electrodes that is operated at applied frequency from 50Hz to several MHz and applied voltages from a few to a few tens of kilovolts rms, the breakdown can occur in working gas, resulting in large numbers of micro-discharges across the gap, the gas discharge is the so called DBD. Compared with most other means for nonequilibrium discharges, the main advantage of the DBD is that active species for chemical reaction can be produced at low temperature and atmospheric pressure without the vacuum set up, it also presents many unique physical and chemical process including light, heat, sound and electricity. This has led to a number of important applications such as ozone synthesizing, UV lamp house, CO2 lasers, et al. In recent years, due to its potential applications in plasma chemistry, semiconductor etching, pollution control, nanometer material and large area flat plasma display panels, DBD has received intensive attention from many researchers and is becoming a hot topic in the field of non-thermal plasma.

• Journal of the Korean Society for Heat Treatment
• /
• v.32 no.6
• /
• pp.263-269
• /
• 2019

The mechanism of microstructure and hardness changes during mill annealing of Ti-6Al-4V alloy was investigated. The annealing heat treatments were performed at $675{\sim}795^{\circ}C$ in vacuum for 2 hours, followed by air cooling. The microstructure was observed by using an optical microscope and X-ray diffraction, and hardness was measured by using a Rockwell hardness tester and micro Vickers hardness tester. The average grain size becomes smaller at $675^{\circ}C$ to $735^{\circ}C$ due to the formation of new grains rather than grain growth, but becomes larger at $735^{\circ}C$ to $795^{\circ}C$ due to growth of the already-formed grains rather than formation of new grains. The mill annealing temperature becomes higher, the ${\beta}$ phase fraction decreases and ${\alpha}$ phase fraction increases at room temperature. This is because the higher annealing temperature, the smaller amount of V present in the ${\beta}$ phase, and thus the ${\beta}$ to ${\alpha}$ transformation occurs more easily when cooled to room temperature. As the mill annealing temperature increases, the hardness value tends to decrease, mainly due to resolution of defects such as dislocations from $675^{\circ}C$ to $735^{\circ}C$ and due to grain growth from $735^{\circ}C$ to $795^{\circ}C$, respectively.

• Proceedings of the Korean Society of Embryo Transfer Conference
• /
• 2002.11a
• /
• pp.87-87
• /
• 2002

초음파기기를 이용한 난포란의 채란 기술은 유전적으로 우수한 수정란의 다량확보가 가능함으로써 가축개량에 널리 응용할 수 있다. 그러나 초음파유도 난포란의 채란은 무엇보다도 회수율과 회수한 난포란의 질적 등급의 개선이 이루어져야 할 것이다. 본 연구는 등지방층두께, 일당증체량, 근내지방도 및 배최장근 단면적에 연관된 DNA marker가 검정된 한우로부터 FSH(FOLLTROPIN-V, Vetrepharm, Canada)를 투여하여 FSH 투여전.후의 포의 발달율과 등급별 회수율을 조사하였다. 공시동물의 발정주기에 관계없이 매주 무처리와 채란 12시간 전에 FSH를 각각 l00mg 과 200mg을 근육 주사하여 난포란의 채취를 유토하였다. 난소내 난포란의 채란은 SONOACE-600형 (Medison CO., 한국) 초음파기기를 사용하여 모니터 상에 검게 나타나는 난포를 17-gauge needle (Cook, Australia) 로써 70mmHg로 유지된 regulated vacuum pump를 이용하여 모두 채란하였으며, 소난포는 손가락 촉지를 이용하여 채란하였다. 난포의 크기는(large : $\geq$6mm, medium : 2-6mm, small $\leq$2mm) 무처리구에서 small(56.6%), medium(33.0%), large follicles(10.4%) 순으로 나타났으며, 전체 난포수는 106(8.2$\pm$3.6개) 였다. FSH 200mg 투여구에서는 medium(47.5%), small(32.5%), large follicles(20.0%) 순으로 나타났으며, 전체난포수는 40(10.0$\pm$2.2개) 였다. FSH l00mg 투여구에서는 medium(45.6%), small(43.5%), large follicles (10.9%) 순으로 나타났으며, 전체 난포는 92(7.7$\pm$2.5개) 였다. FSH 투여전 초음파 image 상으로 관찰한 난포수와 FSH 투여 후 초음파기기와 손가락 촉지를 이용하여 난포의 발달 및 난포란의 채란율은 200mg 투여 구에서는 투여 전에 4.3$\pm$0.6개였으나 투여 후에는 9.3$\pm$2.1개로 증가하였으며, 채란율은 75.0% 였다. l00mg 투여구에서도 투여 전후에 각각 5.3$\pm$1.2개 및 8.2$\pm$2.3개였으며, 채란율은 81.6%였다. 난포란의 채란율은 무처리구에서 88.7%(7.2$\pm$3.9개)로 나타났으며, 회수한 난포란의 등급은 각각 0.0%(GI), 5.3%(GII), 28.T%(GIII), 66.0%(GIV)로 나타났다. FSH 200mg 투여구의 채란율은 87.5%(8.8$\pm$2.6개)로 나타났으며, 등급별회수율은 GI(2.8%), GII(8.6%), GIII(34.3%), GIV(54.3%)으로 나타났다. 뿐만 아니라 FSH 100mg 투여구에서도 회수율은 89.1%(6.8$\pm$5.2개)였으며, 등급별 회수율은 각각 GI(8.5%), GII(13.4%), GIII(43.9%), GIV(34.2%)로 나타났다.

• Korean Journal of Food Science and Technology
• /
• v.30 no.1
• /
• pp.6-12
• /
• 1998

Degummed and bleached soybean oil was deodorized at a temperature range of $220{\sim}280^{\circ}C$ under the vacuum (4-5 torr) for 1 or 2 hrs. Gas chromatography with SP-2560 100 m capillary column was used to separate and quantitate fatty acid methyl esters and their isomers. Fatty acids were identified by comparing retention time with standards and GC-MS spectrum. The isomers of linoleic acid and linolenic acid in deodorized soybean oils were identified to be $C_{18:2}\;{\Delta}9-cis,\;{\Delta}12-trans,\;C_{18:2}\;{\Delta}9-trans,\;{\Delta}12-cis,\;C_{18:2}\;{\Delta}9-cis,\;{\Delta}12-cis,\;C_{18:3}\;{\Delta}9-cis,\;{\Delta}12-cis,\;{\Delta}15-trans,\;C_{18:3}\;{\Delta}9-trans,\;{\Delta}12-cis,\;{\Delta}15-cis,\;C_{18:3}\;{\Delta}9-cis,\;{\Delta}12-trans,\;{\Delta}15-cis,\;and\;C_{18:3}\;{\Delta}9-cis,\;{\Delta}12-cis,\;{\Delta}15-cis$. The formation of trans-fatty acids by deodorization at $240{\sim}280^{\circ}C$ for 2 hrs was in the range of 1.78 to 5.74%. Conclusively, the deodorizing conditions of $240^{\circ}C$ for 2 hrs or $250^{\circ}C$ for 1 hr were suggested as the best conditions which could minimize the formation of trans isomers of fatty acids in soybean oils.