• Journal of Life Science
• /
• v.33 no.5
• /
• pp.406-413
• /
• 2023

In this study, the various physiological and anti-inflammatory activities of Sanguisorba officinalis L. roots (SR) were assessed for potential use as functional cosmetic materials. As a result of measuring electron-donating abilities to determine the antioxidant ability of SR extract, activity increased as the concentration increased, showing an excellent antioxidant capacity of 93.8% at a 1,000 ㎍/ml concentration. Further, the antioxidant power of SR extract, which was determined using an ABTS⁺ assay measurement, was more than 99% at concentrations of 50 ㎍/ml or more, while the tyrosinase inhibition rate was 37.7% at the highest concentration of 1,000 ㎍/ml. Consequently, the elastase and collagenase inhibition of SR extract measured 84.9% and 90.3%, respectively, at a 1,000-㎍/ml concentration. As a result of confirming the survival rate of Raw 264.7 cells, the cell survival rate was determined to be 80% or more below a 100 ㎍/ml concentration, and subsequent cell-related experiments were conducted at concentrations below 100 ㎍/ml. Furthermore, after applying a NO assay to identify anti-inflammatory activity, it was confirmed that SR extract had an inhibitory rate of 50.8% at a concentration of 500 ㎍/ml, and it was excellent at suppressing the inflammatory expression. As a result of verifying protein expression by treating SR extract in Raw 264.7 cells, it was confirmed that expression was inhibited concentrated in all factors. Therefore, it is judged that SR can be used as a functional cosmetic material with antioxidant, whitening, and wrinkle-improving physiological effects and anti-inflammatory activities.

• Journal of Wetlands Research
• /
• v.25 no.2
• /
• pp.99-110
• /
• 2023

Non-point source (NP) pollutants in an agricultural landuse are discharged from a large area compared to those in other land uses, and thus effective source control measures are needed. To develop appropriate control measures, it is necessary to quantify discharge load of each source and evaluate the degree of water quality improvement by implementing different options of the control measures. This study used Hydrological Simulation Program-FORTRAN (HSPF) to quantify pollutant discharge loads from different sources and effects of different control measures on water quality improvements, thereby supporting decision making in developing appropirate pollutant control strategies. The study area is the Gyeseong river watershed in Changnyeong county, Gyeongsangnam-do, with agricultural areas occupying the largest proportion (26.13%) of the total area except for the forest area. The main pollutant sources include chemical and liquid fertilizers for agricultural activities, and manure produced from small scale livestock facilities and applied to agriculture lands or stacked near the facilities. Source loads of chemical fertilizers, liquid fertilizers and livestock manure of small scale livestock facilities, and point sources such as municipal wastewater treatment plants (WWTPs), community WWTPs, private sewage treament plants were considered in the HSPF model setup. Especially, NITR and PHOS modules were used to simulate detailed fate and transport processes including vegitation uptake, nutrient deposition, adsorption/desorption, and loss by deep percolation. The HSPF model was calibrated and validated based on the observed data from 2015 to 2020 at the outlet of the watershed. The calibrated model showed reasonably good performance in simulating the flow and water quality. Five Pollutants control scenarios were established from three sectors: agriculture pollution management (drainge outlet control, and replacement of controlled release fertilizers), livestock pollution management (liquid fertilizer reduction, and 'manure management of small scale livestock facilities) and private STP management. Each pollutant control measure was further divided into short-term, mid-term, and long-term scenarios based on the potential achievement period. The simulation results showed that the most effective control measure is the replacement of controlled release fertilizers followed by the drainge outlet control and the manure management of small scale livestock facilities. Furthermore, the simulation showed that application of all the control measures in the entire watershed can decrease the annual TN and TP loads at the outlet by 40.6% and 41.1%, respectively, and the annual average concentrations of TN and TP at the outlet by 35.1% and 29.2%, respectively. This study supports decision makers in priotizing different pollutant control measures based on their predicted performance on the water quality improvements in an agriculturally dominated watershed.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.25 no.1
• /
• pp.17-27
• /
• 2023

Weeds are one of the factors that reduce crop yield through nutrient and photosynthetic competition. Quantification of weed density are an important part of making accurate decisions for precision weeding. In this study, we tried to quantify the density of weeds in images of maize fields taken by unmanned aerial vehicle (UAV). UAV image data collection took place in maize fields from May 17 to June 4, 2021, when maize was in its early growth stage. UAV images were labeled with pixels from maize and those without and the cropped to be used as the input data of the semantic segmentation network for the maize detection model. We trained a model to separate maize from background using the deep learning segmentation networks DeepLabV3+, U-Net, Linknet, and FPN. All four models showed pixel accuracy of 0.97, and the mIOU score was 0.76 and 0.74 in DeepLabV3+ and U-Net, higher than 0.69 for Linknet and FPN. Weed density was calculated as the difference between the green area classified as ExGR (Excess green-Excess red) and the maize area predicted by the model. Each image evaluated for weed density was recombined to quantify and visualize the distribution and density of weeds in a wide range of maize fields. We propose a method to quantify weed density for accurate weeding by effectively separating weeds, maize, and background from UAV images of maize fields.

• Journal of the Korean Society of Earth Science Education
• /
• v.16 no.1
• /
• pp.143-152
• /
• 2023

This study was conducted on 115 students from 4 classes of 2nd year intensive courses at B University of Education. Elementary preservice teachers were surveyed on what teaching methods they were aware of regarding the subject of elementary science astronomy. Recognition data of 80 people from whom the questionnaire was collected were analyzed. For this study, a 5-day survey was conducted. Elementary preservice teachers complained of difficulties in teaching methods in the astronomy area among various areas of the science department. The purpose of this study was to find out what difficulties elementary preservice teachers have in teaching elementary science astronomy topics, and to find more efficient teaching methods for teaching astronomy topics. The topic of the survey was set by discussing with the preparatory elementary teachers about what kind of survey to use in teaching the subject of elementary science astronomy. There are many topics for elementary science astronomy, but two questionnaires were prepared focusing on the unit on the earth and the moon. 'What does the earth look like?' in Unit 4 (1/10) of the 3rd year, 1st semester In Unit 2 (1/11) of the 1st semester of the 6th grade, it was set as 'What does the moon look like?'. Candidly describe how to teach the subject of astronomy to elementary school students by mobilizing all the background knowledge of preparatory elementary teachers. The results of these surveys were visualized and displayed using Netminer as a language analysis method, and the contents of the responses to the actual surveys by pre-service elementary school teachers were described and interpreted. Based on these results, preparatory elementary teachers tried to suggest a more efficient teaching method for the subject of elementary science astronomy. In addition, basic procedures and methods for lecturing on the subject of elementary science astronomy were presented. A more efficient teaching method for teaching elementary science astronomy subjects to pre-service elementary teachers was suggested.

• Journal of the Korean Society of Radiology
• /
• v.17 no.2
• /
• pp.257-265
• /
• 2023

The purpose of this study was to vaccinate every year according to the general characteristics of COVID-19, whether to vaccinate every year according to the vaccination experience, whether to vaccinate every year according to knowledge/attitude about vaccination, and negative responses to the vaccinate every year In order to understand the factors affecting the vaccination physician every year by identifying the factors of Statistical analysis is based on general characteristics, variables based on vaccination experience, and knowledge/attitudes related to vaccination. The doctor calculates the frequency and percentage, A square test (-test) was performed, and if the chi-square test was significant but the expected frequency was less than 5 for 25% or more, a ratio difference test was performed with Fisher's exact test. Through multiple logistic regression analysis using variables that were significant in simple analysis, a predictive model for future vaccination and the effect size of each independent variable were estimated. As statistical analysis software, SAS 9.4 (SAS Institute Inc., Cary, NC, USA) was used, and because the sample size was not large, the significance level was set at 10%, and when the p-value was less than 0.10, it was interpreted as statistically significant. In the simple logistic regression analysis, the reason why they answered that they would not be vaccinated every year was that they answered 'to prevent infection of family and hospital guests' rather than 'to prevent my infection' as the reason for the vaccination. It was 11.0 times higher and 3.67 times higher in the case of 'for the formation of collective immunity of the local community and the country'. The adverse reactions experienced after the 1st and 2nd vaccination were 8.42 times higher in those who did not experience pain at the injection site than those who did not, 4.00 times higher in those who experienced swelling or redness, and 5.69 times higher in those who experienced joint pain. There was a 5.57 times higher rate of absenteeism annually than those who did not. In addition, the more anxious they felt about vaccination, the more likely they were to not get the vaccine every year by 2.94 times.

• Journal of the Korean Chemical Society
• /
• v.67 no.2
• /
• pp.81-88
• /
• 2023

The contribution of hydrophobic residues to the protein folding reaction was studied by using HubWA variant proteins with I and L to V mutation. Folding kinetics of all V variant proteins was observed to be satisfied by a three-state on-pathway mechanism, U ⇌ I ⇌ N, where U, I, and N represent unfolded, intermediate, and native state, respectively. Three-state folding reaction was quantitatively analyzed and the free energy of folding of each elementary reactions and overall folding reaction, ΔG^o_UI, ΔG^o_IN, and ΔG^o_UN, were obtained. From the ratio of free energy difference between the variant protein and HubWA, ΔΔG^o_UI/ΔΔG^o_UN (ΔΔG^o_UI = ΔG^o_UI (variant protein) - ΔG^o_UI (HubWA) and ΔΔG^o_UN = ΔG^o_UN (variant protein) - ΔG^o_UN(HubWA)), the contribution of hydrophobic residues to HubWA folding was analyzed. The residues which are located in the hydrophobic core between α-helix and β-sheet, I3, I13, L15, I30, L43, I61 and L67, showed ΔΔG^o_UI/ΔΔG^o_UN value of ~0.5 when each of these residues was mutated to V, indicating that these residues form relatively solid hydrophobic core in the intermediate state. Residues located at the end of secondary structures and loop, I23, L69 and I36 showed ΔΔG^o_UI/ΔΔG^o_UN value below 0.4 when each of these residues was mutated to V, indicating that the region containing these residues are loosely formed in the intermediate state. V17A, L50V and L56V showed fairly high ΔΔG^o_UI/ΔΔG^o_UN value of ~0.8. Since L50 and L56 are located in the region containing long loop (residue 46 to 62), it is suggested that the high ΔΔG^o_UI/ΔΔG^o_UN value of these residues prevents the formation of aggregate at the early stage of folding reaction.

• Journal of Food Hygiene and Safety
• /
• v.38 no.2
• /
• pp.55-62
• /
• 2023

This study aimed to investigate the effect of a coating agent on pork storage. Pork was coated with a coating agent containing sodium carboxymethyl cellulose (CMC) and mandarin peel powder (M). The treatments were divided into control, a 0.1% CMC treatment, and a 0.1% CMC +5% M treatment, and pH, color, 2-thiobarbituric acid reactive substances (TBARS), volatile basic nitrogen (VBN), and the number of viable cell counts were measured. In the case of redness (a), it was found that the reduction over the storage period was less in the 0.1% CMC + 5% M treatment than in the control and the 1% CMC treatment. When stored at 4℃ and 25℃, TBARS of pork tended to increase during the storage period, followed by control, 0.1% CMC treatment, and 0.1% CMC + 5% M treatment, indicating that lipid oxidation was most suppressed in pork coated with mandarin peel powder. As a result of measuring the VBN of pork stored at 4℃ and 25℃, the 0.1% CMC + 5% M treatment showed lower values than the control and 0.1% CMC treatment. When the film-coated pork was stored at 4℃, the number of viable cell counts in the 0.1% CMC +5% M treatment area was 7.13±0.96 log CFU/g on the 12th day of storage, delaying the growth of viable cell counts for approximately 3 d more than other treatments. Therefore, coating pork with a film containing CMC and mandarin peel powder has been confirmed to delay the increase in the number of viable cell counts while reducing the quality change during pork storage, which is an effective alternative to improving the storage of fresh food as an edible film.

• Journal of Environmental Health Sciences
• /
• v.49 no.2
• /
• pp.66-77
• /
• 2023

Background: Along with the increase in consumer interest in and consumption of tattoo products, the controversy over harmful heavy metals associated with the use of tattoo cosmetics is also increasing. Therefore, investigation of hazardous metals in these tattoo products is needed. Objectives: This study was performed to provide useful data for establishing reasonable standards to securely manage tattoo cosmetics, tattoo stickers, and tattoo inks distributed in the market. Methods: Thirteen kinds of hazardous metal contents (Pb, As, Cd, Sb, Ni, Co, Cu, Cr, Se, Ba, Zn, Sn, and Hg) were analyzed for 23 tattoo cosmetics, ten tattoo stickers, and 16 tattoo inks. Hg was measured through the combustion-gold amalgamation method, and other hazardous metals were measured by inductively coupled plasma-mass spectrometry (ICP-MS) after acidic decomposition using a microwave apparatus. Results: The detected ranges of Pb, As, Cd, Sb, Ni, and Hg in tattoo cosmetics were 0.07~1.18, 0.06~0.41, ND~0.07, 0.01~3.44, 0.12~2.75, and ND~0.01 ㎍/g, respectively. All of the hazardous metals detected were below the recommended maximum standards of the Ministry of Food and Drug Safety. The mean amount of Pb detected in tattoo stickers for children was 0.24 ㎍/kg and Cd was not detected, meaning both metals met the recommended criteria. There was no statistically significant difference in all measured metals between children's tattoo stickers and adults' tattoo stickers. In the results of the study on the hazardous metal content of tattoo inks, four products (25%) for Pb, one product (6%) for As, 13 products (81%) for Ni, four products (25%) for Cu, and five products (31%) for Zn exceeded the recommended standards approved by the government. The highest predicted exposure amount for hazardous metals exceeding the recommended level of tattoo inks in a single tattooing was 5.69 ㎍/kg for Ni, 8.51 ㎍/kg for Zn, 0.44 ㎍/kg for Pb, 8.07 ㎍/kg for Cu, 0.44 ㎍/kg for As, and 71.36 ㎍/kg for Ba. Conclusions: It is necessary to prepare criteria for content limitation for the management of Co, Cr, Ba and Se tattoo cosmetics, and tattoo inks require thorough quality control.

• Journal of Technology Innovation
• /
• v.31 no.1
• /
• pp.105-148
• /
• 2023

This paper provides a new method of measuring the degree of technological progress which contributes to real economic growth based on Schumpeter's Trilogy. Using Microdata of Statistics Korea, the results of measuring and comparing the actual growth contribution of technological progress during the period 2003-2018 by the total factor productivity growth rate(growth accounting method), the R&D investment contribution rate, and the Schumpeterian innovation growth rate, respectively are as follows. First, the measurement of the real growth contribution of technological progress by the growth rate of total factor productivity and the growth rate of Schumpeterian innovation shows contradictory results. Second, when the growth rate of production is in a decreasing trend, the difference between the growth rate of production and the growth rate of total factor productivity increases compared to when it is in an increasing trend. Conversely, when there is an increasing trend, the difference between the growth rate of production and the growth rate of total factor productivity becomes smaller compared to when it is in a decreasing trend.. Third, the technological opportunity that affects the innovation growth rate, i.e., the contribution of R&D incentives to innovative growth is only 3.3%. The reason why this result is different from the existing perception of the contribution of technological progress to growth is that different entities are being measured while measuring the same term of technological progress. Therefore, the growth rate of total factor productivity should be used to measure macroeconomic efficiency, R&D investment should be used to measure the effectiveness of new technology supply, and the Schumpeterian innovation rate should be used to measure the economic impact of technological progress. The policy implications of the research results of this thesis are as follows: ① Transition from a policy of one-sided technology supply to a policy of convergence of technology supply and new technology demand support, ② Mission-oriented R&D policy and R&D policy that links national R&D with private R&D, ③ Reclassification of capital goods reflecting the degree of new knowledge.

• Clean Technology
• /
• v.29 no.3
• /
• pp.193-199
• /
• 2023

Biomass has been used to secure renewable energy certificates (REC) in domestic and overseas coal-fired power plants. In recent years, biofuel has been diversified from traditional wood pellets to non-woody biomass. Non-woody biomass has a higher content of alkaline metals such as K and Na than wood-based biomass, resulting in a lower melting point and an increase in slagging on boiler tubes, which reduces boiler efficiency. This study analyzed the effect of kaolin, an additive commonly used to increase melting points, on biomass co-firing to coal through thermochemical equilibrium calculations. In a previous experiment on biomass co-firing to coal conducted at 80 kW_th, it was interpreted that the use of kaolin actually increased the amount of fouling. In this study, analysis showed that when kaolin was added, aluminosilicate compounds were generated due to Al₂O₃, which is abundant in coal, and mullite was formed. Thus, it was confirmed that the amount of slag increased when more kaolin was used. Further analysis was conducted by increasing the biomass co-firing rate from 0% to 100% at 10% intervals, and the results showed non-linear liquid slag generation. As a result, it was found that the least amount of liquid slag was generated when the biomass co-firing rate was between 50 and 60%. The phase diagram analysis showed that high melting point compounds such as leucite and feldspar were most abundantly generated under these conditions.