• 한국안전학회지
• /
• 제27권5호
• /
• pp.105-110
• /
• 2012

Steel elements are widely used for temporary structures on every construction site. but despite its strong resistences against heavy concrete volumes, they are easily eroded by oxygens in the space as times have been gone. If they are used several times in the construction fields, their elements are rusted and deformed and the strength is gradually reduced through the weak part. From this point of view, aluminum pipe support has been developed in stead of steel pipe sopport with enhancing durability against oxygens all the more. The developed aluminium pipe support has been lighter than steel unit, so workability has been improved. In another advantage of aluminium pipe support, different level control is possible with being equipped with the level control nut which enables the length adjustment of aluminium pipe support and the collapse of aluminum pipe support could be also prevented from the structures in the long term.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2010년도 춘계 학술발표회
• /
• pp.811-818
• /
• 2010

This paper presents the results of a numerical investigation on behavior of deep excavation wall system supported by steel pipe struts. A series of three-dimensional finite element analyses were carried out on a deep excavation project site which adopted steel pipe struts. The results indicated that the mechanical behavior of steel pipe supported deep excavation is comparable to that of a conventional H-pile supported deep excavation, although the steel pipe supported system is required less number of struts than the conventional H-pile strut system. Also shown is that the sectional stresses of the steel pipe support system are within the allowable values implying that the steel pipe support system can be effectively used as an alternative to conventional H-pile support system.

• 한국안전학회지
• /
• 제35권3호
• /
• pp.43-48
• /
• 2020

It is considered that most of reusable pipe supports, which are used as formwork support posting at construction sites, do not meet the performance standard. Due to the use of reusable pipe supports that do not meet such performance standard the potential risk of collapse accident is increasing. Therefore, this study identifies the status of compliance with performance standard, and presents the requirements for improving quality control to prevent the collapse of pipe supports reused at the construction site. First, if the female thread of the product with no clearance and new support pin with the diameter of 12mm are replaced at the same time for use, it is considered that the performance will be improved. Second, as the quality performance during use can be improved in the case of larger thickness of inner diameter compared to the case of larger thickness of outer diameter, it is necessary to increase the inner pipe thickness greatly than the current thickness. Based on the results of this study, it is expected that the performance the reusable pipe support (V4) can be improved, if the diameter of the support pin is 12mm, the female thread has a small clearance, and the inner tube thickness is 2.3 ~ 2.7mm. In addition, it is considered that other performance improvement factors included in the study results could be used as important data for improving the performance of reusable pipe support.

• 한국지반공학회논문집
• /
• 제26권6호
• /
• pp.45-56
• /
• 2010

본 논문에서는 강관버팀보로 지지되는 흙막이 굴착 시스템의 거동에 관한 수치해석 연구내용을 다루었다. 최근 들어 적용성이 점차 늘고 있는 강관버팀보로 지지되는 흙막이 시스템의 거동특성에 관한 이해 증진의 일환으로 본 연구에서는 강관버팀보가 적용된 실제 현장 단면에 대한 3차원 해석을 수행하였으며 그 결과를 토대로 흙막이 벽체 및 버팀보, 브레이싱 시스템에 대한 3차원 거동 메카니즘을 고찰하였다. 이와 아울러 동일한 굴착단면에 대해 H-형강 버팀보 적용 조건에 추가해석을 통해 강관버팀보 적용 단면과의 직접적인 비교를 시도하였다. 그 결과 강관버팀보 적용단면의 경우 H-형강 단면과 비교하여 수평간격이 넓음에도 불구하고 거의 대등한 거동을 보이는 것으로 나타났다.

• 한국안전학회지
• /
• 제16권1호
• /
• pp.59-64
• /
• 2001

Even though there is a guideline for the required strength of pipe support in inspection, it does not mean the nominal strength which can be used for the form work design. And, Concrete Specification defines that the pipe support should be designed according to the steel design guidelines but the design details are not provided, such as buckling length and the sectional modulus, etc. For the better prediction of strength of pipe support, the slenderness ratio of support which reflects the boundary condition should be considered. In this paper, the elastic buckling formula based on the slenderness is derived. The formula contains the strength reduction factor that consider the strength deduction caused by initial lateral deformation and is 0.65 consistently regardless of boundary conditions. And the coefficient of effective buckling length is calculated from the experiment.

• 한국산업융합학회 논문집
• /
• 제27권5호
• /
• pp.1129-1136
• /
• 2024

This study aims to present a method for reducing human error, time spent on design, and waste of design manpower when designing plant pipe hanger & support using sketches based on piping and steel structure drawings in plant. The method involves organizing the pipe hanger & support design process based on codes and standards and developing a program to facilitate this. The design of whole plant systems, including pipe hangers & supports, is conducted within 3D plant CAD software that applies BIM (Building Information Modeling). All attribute information of the pipe hanger & support is digitized as a digital asset, and the design is executed as an add-in module. This module is then used for BOM(generating Bill of Materials) and installation drawings, which are essential for the fabrication and on-site installation of pipe hangers & supports.

• 한국안전학회지
• /
• 제23권4호
• /
• pp.67-71
• /
• 2008

Formwork is a temporary structure that supports its weight and that of fresh concrete as well as construction live loads. Slab formwork consists of sheathing, stringer, hanger and shore. In construction site, pipe supports are usually used as shores which are consisted of the slab formwork. In this study, compressive strength of 80 pipe supports was measured by knife edge test and plate test. Buckling load of pipe supports was analyzed by structural analysis program(MlDAS). Theoretical buckling load with/without initial deformation was got by theoretical analysis. According to these results, buckling load which was analyzed by structural analysis program(MlDAS) was larger than compressive strength of knife edge test and plate test. Theoretical buckling load without initial deformation was larger than compressive strength of knife edge test and plate test. But Theoretical buckling load with initial deformation was lower than compressive strength of knife edge test and plate test. Initial deformation equation for test method according to the pipe support length was suggested. Therefore, the present study results will be used to design the slab formwork safely.

• 한국지구물리탐사학회:학술대회논문집
• /
• 한국지구물리탐사학회 2003년도 Proceedings of the international symposium on the fusion technology
• /
• pp.103-108
• /
• 2003

In the construction of mountain tunnels, reaction forces of the legs of steel arch supports against the ground are often expected to support the ground being excavated. In these cases, a stress concentration occurs in the ground directly under the support legs. If the bearing capacity of the ground is insufficient or displacement is not effectively constrained, the local failure of the ground under the support legs or settlement of the tunnel supports due to large deformation could result. It is therefore necessary to reinforce the support legs to reduce settlement. As a means of reducing settlement, wing-ribbed steel arch supports are well used. In this study, with the aim of finding a way to quickly reduce the settlement of steel arch support legs, effectiveness of a new type of wing ribs to reinforce steel arch supports was investigated through laboratory testing.

• 콘크리트학회논문집
• /
• 제16권2호
• /
• pp.139-146
• /
• 2004

최근 들어 가설기자재의 성능에 대한 관심이 급속히 증가하고 있다. 1992년 산업안전보건법에 의해 가설기자재 성능검정제도가 도입된 이후, 최근 2년간에 걸쳐 실시한 성능시험을 토대로 강제파이프서포트에 대한 기초적 연구를 진행하였다. 강제파이프 서포트의 국내 규격과 현재 연구현황을 소개하였으며, 총 849개의 시편을 대상으로 외관과 내경의 길이 및 두께조사와 겹침길이 및 평압시험과 나이프에지시험 등의 압축강도시험을 실시하였다. 전체적으로 신품과 재사용품으로 구분하여 시험을 하였으며, 재사용품의 성능감소를 파악할 수 있었다. 규격 또한 신품에 비해 많은 부분 부족한 것으로 나타났다 일반적으로 재사용품이 $10\%$ 정도의 성능감소를 파악할 수 있었으며, 이를 고려하여 볼 때 현장에서의 품질확인과 감독이 반드시 필요할 것으로 판단되었다. 우선 기초적인 결과를 토대로 통계값을 제시하였고, 각 영향요소별 세부분석은 현재 연구진행중이다. 본 연구결과는 향후 파이프서포트에 대한 기본자료로 활용될 것으로 기대된다.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2023년도 봄 학술논문 발표대회
• /
• pp.301-302
• /
• 2023

In this study, we aimed to identify changes in fire resistance according to the type of sleeves used for pipe penetrations and to examine their accreditation of fire resistance performance and use them as basic data. The test results of fire resistance according to the type of sleeve used in non-metallic pipe facilities showed that the temperature on the support side was higher for sleeves with higher thermal conductivity. For the temperature on the surface of the pipes, in the case of galvanized steel plates, steel pipes, and structures without sleeves, the highest temperature was observed after the expansion of the firestop material for 46 to 53 minutes and then decreased. PVC sleeves showed a steady increase in temperature until 53 minutes, after which the temperature did not increase further. In addition, for non-metallic pipes, the effect of the type of sleeve on fire resistance is considered to be insignificant because the lower part (heating direction of the furnace) under the support structure is cut off to block the heat during the two-hour fire resistance test.