• Journal of the Society of Naval Architects of Korea
• /
• v.50 no.2
• /
• pp.111-119
• /
• 2013

The concept of the natural frequency is useful for understanding the characters of oscillating systems. However, when a circular cylinder floating horizontally on the water surface is heaving, due to the hydrodynamic forces, the system is not governed by the equation like that of the harmonic one. In this paper, in order to shed some lights on the more correct use of the concept of the natural frequency, a problem of the heaving circular cylinder is analyzed in the frequency domain. Previously, it was thought that the theory of Ursell (1949) could not be used to get the added mass and wave-making damping for short waves, however, they were obtained by applying an accurate collocation method to the theory in this study. Using the so developed numerical method, we found the added mass and wave-making damping of the circular cylinder for the entire range of the frequency. Then, the MCFR(Modulus of Complex Frequency Response) was used to locate the frequency corresponding to the local maximum of MCFR and we define it as the natural frequency. Comparing our results with the previous investigation, we found that the pressure distribution on the cylinder gets close asymptotically to that of a cylinder in infinite fluid OR close to that of the cylinder, that the approximation of the natural frequency by Lee (2008) is different from our new value only by 0.64%, and that the approximation of the heaving system by an equivalent damped harmonic oscillation is not proper by the reason that is clearly shown from the comparison of the shape of the corresponding MCFRs.

• The Transactions of the Korean Institute of Electrical Engineers B
• /
• v.52 no.5
• /
• pp.230-237
• /
• 2003

Current mode control has been used for DC to DC converters for over twenty years. There are many different control schemes which use the inductor current signal in one way or another to control the DC to DC converter. In this paper, the state space averaging technique is applied for the analysis of flyback type current mode control circuit. We made real converter for the guarantee of stable output characteristic and proper design of feedback circuit. The validity of proposed method is verified from test result. The improvement of stability is confirmed by sinusoidal signal injection method with isolated transformer. It is known that phase margin is sufficient and gain crossover frequency fc is early 1/5 of switching frequency, fs, from the experimental result with frequency response analyzer.

• Journal of the Korean Society of Costume
• /
• v.50 no.6
• /
• pp.143-153
• /
• 2000

The purpose of this study was to find out the relationship among the frequency of perfume usage and perfume attitude. perfume consuming behaviors and demographies. The data were collected from 352 female college students using questionnaire. Three groups including Large amount users(30.1%), Medium amount users(33.8%), and Small amount users(36.1%) were identified by the frequency of perfume usage. The results were summarized as follows : 1. There were significant differences on perfume attitudes and perfume consuming behaviors among the three groups. The more they use perfume, the more they feel pleasure and self-confidence. Most subjects preferred overseas prestige and popular perfume. And they obtained perfume informations through magazine ads and article. 2. There were significant differences demographic characteristics among the three groups. The older and the higher social status frequently used perfume. This study will provide useful marketing data and implications for activation of domestic perfume market.

• Journal of Communications and Networks
• /
• v.9 no.4
• /
• pp.466-472
• /
• 2007

Single carrier block transmission with frequency domain equalization(SC-FDE) has been shown to be a promising candidate in ultra-wideband(UWB) communications. In this paper, we analyze the performance of SC-FDE over UWB communications with channel estimation error. The probability density functions of the frequency domain minimum mean-squared error(MMSE) equalizer taps are derived in closed form. The error probabilities of single carrier block transmission with frequency domain MMSE equalization under imperfect channel estimation are presented and evaluated numerically. Compared with the simulation results, our semi-analytical analysis yields fairly accurate bit error rate performance, thus validating the use of the Gaussian approximation method in the performance analysis of the SC-FDE system with channel estimation error.

• International Journal of Computer Science & Network Security
• /
• v.23 no.3
• /
• pp.203-207
• /
• 2023

A frequency reconfigurable antenna based on graphene and used for multi-band wireless communications is presented in this article. The proposed antenna, which consists of two radiating rectangular loops with a graphene extension, is analyzed for Global Positioning System (GPS) and Iridium applications. Its operating frequency is tuned through the implementation of a layer of graphene and thereby adjusting the applied gate bias. Furthermore, the results show a novel use of graphene for microwave frequencies while achieving a frequency reconfiguration with an improvement of the impedance matching and the gain. The results also prove the importance of graphene, with its exceptional properties, for a promising future in nano-electronics.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.13 no.9
• /
• pp.932-936
• /
• 2002

This paper has been studied a calibration techniques in CISPR A for 1 m monopole antenna factor in the frequency range below 30 MHz. The equivalent capacitance substitution method uses a dummy antenna in place of the actual rod element. Dummy antenna measure frequency from 150 kHz to 30 MHz and good results factor from 150 kHz to 25 MHz compare to using 1 m monopole antenna factor. It will be use to substitute dummy antenna factor for 1 m monopole antenna factor.

• Textile Coloration and Finishing
• /
• v.25 no.4
• /
• pp.287-291
• /
• 2013

Nowadays, terms such as 'Smart Textile', 'Intelligent Textile' and 'Wearable Computing' are commonly used in everyday contexts. And radio-frequency identification (RFID) is the use of a wireless non-contact system that uses radio-frequency electromagnetic fields to transfer data from a tag attached to an object, for the purposes of automatic identification and tracking. These products are required technologies which are textile treatments, printing, ink, etc. Durability of textile substrates is an essential marker for conductive ink printing process. Especially, heat stability is important, since conductive ink should be processable (annealing, curing) at temperatures below $150^{\circ}C$. This study was application of RFID on textiles. The textile pre-treatment processes should be carried out to use RFID antenna on textiles.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.11 no.2
• /
• pp.5-15
• /
• 2008

Cooperation between the GVWS within a few hundred meters has forced MWRs equipped to have service ranges in such a short ranges as well as the limited numbers of channels are available. This kind of situation often produces the frequency interferences between MWRs due to the easy uses of the common and adjacent frequencies between them. Current work provides the details of the frequency interferences and the possible degrees of detections. It is also described that the effective distances for the operation between the GVWS are investigated when they use the common and the adjacent frequencies each other with the factors as the frequency intervals and the antenna arrangement angles.

• Journal of the Korean Society of Safety
• /
• v.6 no.2
• /
• pp.21-30
• /
• 1991

In this paper, we study effect of waveness at the optical surface roughness measurement. In generally, waveness components cause errors in calculation of the roughness value of metal surface. We study about surface roughness signals In the frequency domain for separate two signal component of real roughness and waveness by digital signal processing methods. Thereafter, determine low and high Component of frequency spectrum. By this separating frequency value we design liner low and high pass filter which cutoff frequency is 1 Hz. After this process, converted each filtered spectrum by inverse discrete fourier transformation to time domain waveness and real roughness signals We calculate surface roughness value from filtered roughness signals. For evaluate this method, we use five specimens roughness signal which obtained from optical surface roughness measuring system in 3mm/s moving speed with 0.1 mm laser beam spot size As a result, we obtain more linerized roughness value than that of unfiltered roughness signals.

• Proceedings of the KIEE Conference
• /
• 2001.07b
• /
• pp.1281-1283
• /
• 2001

An investigation into power conditioners that interface with photovoltaic array and utilities has been completed. The rating for this investigation is residential system(3-5kW) that interface with a 220V single phase utility connection. As the result of this investigation, a 3kW high frequency PWM IGBT inverter feeding a high frequency isolation transformer with a sinusoidal current wave was selected. The output of the transformer rectified with a diode bridge rectifier four IGBT, used as 60Hz switched, reverse the polarity of the rectified current on every other half cycle of the utility voltage. Even though the high frequency link system used more power semiconductors a net size, weight, and parts cost saying result compared to the other systems due to elimination of 60Hz transformer.