• Title/Summary/Keyword: use for information

Search Result 27,363, Processing Time 0.064 seconds

Methodology for Assessing an Integrated Mobility of the Passenger Passing through Intermodal Transit Center (복합환승역사 통행자 기반 통합 모빌리티 평가 기법 개발)

  • You, So-young;Kim, Kyongtae;Jeong, Eunbi;Lee, Jun
    • The Journal of The Korea Institute of Intelligent Transport Systems
    • /
    • v.16 no.5
    • /
    • pp.12-28
    • /
    • 2017
  • The core of the transportation service, so-called Mobility 4.0 is the flexibility of the entire mobility and its implementation. By doing so, the most essential element is to build a platform to link a supply and a demand simultaneously. In other word, a comprehensive analytical framework is to be set with a data repository which can be periodically updated. With such circumstances, the entire trip chain including pedestrian movements is required to be thoroughly investigated and constructed at the viewpoint of the intermodal transit station. A few studies, however, have been attempted. In this study, the comprehensive analytical framework with the integrated mobility at intermodal transit station was proposed, which consisted of the three modules; 1) Data Repository Extracting from Smart Card DB, 2) Framework of Analyzing Integrated Mobility, and 3) Interpretation of the Integrated Mobility with GIS information and the other factors. A case study with the seven railway stations (Sadang, Sindorom, Samseong, Gwanghwanoon, Gangnam, Jamsil, Seoul Nat'l Univ. of Education) was conducted. The stations of the case study were clustered by the three groups with the statistical ground, and it is most likely to understand the effect of a variety of factors and a comprehensive data-driven analyses with the entire trip stages.

A 10b 100MS/s 27.2mW $0.8mm^2$ 0.18um CMOS Pipeline ADC with Various Circuit Sharing Schemes (다양한 회로 공유기법을 사용하는 10비트 100MS/s 27.2mW $0.8mm^2$ 0.18um CMOS Pipeline ADC)

  • Yoon, Kun-Yong;Lee, Se-Won;Choi, Min-Ho;Lee, Seung-Hoon
    • Journal of the Institute of Electronics Engineers of Korea SD
    • /
    • v.46 no.4
    • /
    • pp.53-63
    • /
    • 2009
  • This work proposes a 10b 100MS/s 27.2mW $0.8mm^2$ 0.18um CMOS ADC for WLAN such as an IEEE 802.11n standard. The proposed ADC employs a three-stage pipeline architecture and minimizes power consumption and chip area by sharing as many circuits as possible. Two multiplying DACs share a single amplifier without MOS switches connected in series while the shared amplifier does not show a conventional memory effect. All three flash ADCs use only one resistor ladder while the second and third flash ADCs share all pre-amps to further reduce power consumption and chip area. The interpolation circuit employed in the flash ADCs halves the required number of pre-amps and an input-output isolated dynamic latch reduces the increased kickback noise caused by the pre-amp sharing. The prototype ADC implemented in a 0.18um n-well 1P6M CMOS process shows the DNL and INL within 0.83LSB and 1.52LSB at 10b, respectively. The ADC measures an SNDR of 52.1dB and an SFDR of 67.6dB at a sampling rate of 100MS/s. The ADC with an active die area of $0.8mm^2$ consumes 27.2mW at 1.8V and 100MS/s.

An Adaptive Anti-collision Algorithm for RFID Systems (RFID 시스템에서의 적응형 리더 충돌 방지 알고리즘)

  • Ok, Chi-Young;Quan, Cheng-Hao;Choi, Jin-Chul;Choi, Gil-Young;Mo, Hee-Sook;Lee, Chae-Woo
    • Journal of the Institute of Electronics Engineers of Korea CI
    • /
    • v.45 no.4
    • /
    • pp.53-63
    • /
    • 2008
  • Reader collision may occur when neighboring RFID readers use the same channel at the same time. Especially when the readers are operated in dense mode, even though many channels are available, because of frequent reader collisions we can not guarantee the performance of RFID readers. Conventional solutions such as FH(Frequency Hopping) or LBT(Listen Before Talk) are not effective in this situation because they can not schedule RFID readers effectively when RFID readers are operated in multi-channel, dense reader mode, In this paper, we propose a new RFID reader anti-collision algorithm which employs LBT, random backoff before channel access, and probabilistic channel hopping at the same time. While LBT and Random backoff before channel access reduces collisions between competing readers, probabilistic channel hopping increases channel utilization by adaptively changing the hopping probability by reflecting the reader density and utilization. Simulation results shows that our algorithm outperforms conventional methods.

RFID Reader Anti-collision Algorithm using the Channel Monitoring Mechanism (채널 모니터링 기법을 이용한 RFID 리더 충돌방지 알고리즘)

  • Lee Su-Ryun;Lee Chae-Woo
    • Journal of the Institute of Electronics Engineers of Korea TC
    • /
    • v.43 no.8 s.350
    • /
    • pp.35-46
    • /
    • 2006
  • When an RFID reader attempts to read the tags, interference might occur if the neighboring readers also attempt to communicate with the same tag at the same time or the neighboring readers use the same frequency simultaneously. These interferences cause the RFID reader collision. When the RFID reader collision occurs, either the command from the reader cannot be transmitted to the tags or the response of the tags cannot receive to the reader correctly, Therefore, the international standard for RFID and some papers proposed the methods to reduce the reader collision. Among those, Colorwave and Enhanced Colorwave is the reader anti-collision algorithm using the frame slotted ALOHA based a TDM(Time Division Multiplex) and are able to reduce the reader collision because theses change the frame size according to a collision probability. However, these can generate the reader collisions or interrupt the tag reading of other readers because the reader that collides with another reader randomly chooses a new slot in the frame. In this paper, we propose a new RFID reader anti-collision algorithm that each reader monitors the slots in the frame and chooses the slot having the minimum occupation probability when the reader collision occurs. Then we analyze the performance of the proposed algorithm using simulation tool.

Accuracy assessment of implant placement using a stereolithographic surgical guide made with digital scan (디지털 스캔을 이용하여 제작된 임플란트 수술가이드의 정확도)

  • Jeong, Seung-Mi;Fang, Jeong-Whan;Hwang, Chan-Hyeon;Kang, Se-Ha;Choi, Byung-Ho;Fang, Yiqin;Jeon, Hyongtae;An, Sunghun
    • The Journal of Korean Academy of Prosthodontics
    • /
    • v.53 no.2
    • /
    • pp.111-119
    • /
    • 2015
  • Purpose: The objective of this study was to evaluate the accuracy of a stereolithographic surgical guide that was made with information from intraoral digital impressions and cone beam CT (CBCT). Materials and methods: Six sets of resin maxilla and mandible models with missing teeth were used in this study. Intraoral digital impressions were made. The virtual models provided by these intraoral digital impressions and by the CBCT scan images of the resin models were used to create a surgical guide. Implant surgery was performed on the resin models using the surgical guide. After implant placement, the models were subjected to another CBCT scan to compare the planned and actual implant positions. Deviations in position, depth and axis between the planned and actual positions were measured for each implant. Results: The mean deviation of the insertion point and angulation were 0.28 mm and $0.26^{\circ}$, apex point were 0.11 mm and 0.14 mm respectively. The implants were situated at a mean of 0.44 mm coronal to the planned vertical position. Conclusion: This study demonstrates that stereolithographic surgical guides created without the use of impressions and stone models show promising accuracy in implant placement.

Performance and Jitter Effects Analysis of Single Bit Electro-Optical Sigma-Delta Modulators (단일 비트 전자-광학 시그마-델타 변조기의 성능 및 지터 효과 분석)

  • Nam, Chang-Ho;Ra, Sung-Woong
    • The Journal of Korean Institute of Electromagnetic Engineering and Science
    • /
    • v.23 no.6
    • /
    • pp.706-715
    • /
    • 2012
  • Electro-optical sigma-delta modulators are the core module of digital receiver to digitize wideband radio-frequency signals directly at an antenna. Electro-optical sigma-delta modulators use a pulsed laser to oversample an input radio-frequency signals at two Mach-Zehnder Interferometer(MZI) and shape the quantization noise using a fiber-lattice accumulator. Decimation filtering is applied to the quantizer output to construct the input signal with high resolution. The jitter affects greatly on reconstructing the original input signal of modulator. This paper analyzes the performance of first order single bit electro-optical sigma-delta modulator in the time domain and the frequency domain. The performance of modulator is analyzed by using asynchronous spectral averaging of the reconstructed signal's spectrum in the frequency domain. The reference value of time jitter is presented by analyzing the performance of jitter effects. This kind of jitter value can be used as a reference value on the design of modulators.

A Study of Costumes in the Palace Painting Depicting the Worship of Buddha during the Reign of King Myungjong (관중숭불도에 나타난 16세기 복식연구)

  • 홍나영;김소현
    • Journal of the Korean Society of Costume
    • /
    • v.38
    • /
    • pp.305-321
    • /
    • 1998
  • The costume style of the Chosun dynasty changed greatly after Imjinwaeran (the Japanese Invasion of Chosun Korea, 1592∼1598). Most of the extant costumes come from the late Chosun, but some costumes produced be-fore Imjinwaeran have been excavated, and in addition, information on these older constumes is contained in contemporary literature. Of especial value in the study of pre-Imjinwaeran Chosun constumes is a mid-sixteenth century palace painting depicting the worship of Buddha, a painting in the collection of the Ho-Am Art Museum in Seoul. The present study of costume during the middle Chosun dynasty focuses on this painting, and compares it with other contemporary palace paintings, and with other contemporary palace paintings, and with Nectar Ritual Paintings. The following conclusion were drawn : * Concerning woman's hair styles of the time, married women wore a large wig. Un-married women braided their hair, and then either let it fall down their back or wore it coiled on top of their head. * The major characteristic of woman's costumes was a ample, tube-like silhouette, with the ratio of the Jeogori(Korean woman's jacket) and skirt being one-to-one. * The style of Jeogori in the painting was like that of excavated remains. Some Jeogoris were simple (without decoration), while some Jeogoris were worn with red sashes. Here we can confirm the continuity of ancient Korean costumes with those of the sixteenth century * Although the skirt covered the ankles, it did not touch the ground. Because the breadth of the skirt was not wide, it seems to have been for ordinary use. Colors of skirts were mainly white or light blue. * All men in the painting wore a headdress. Ordinary men, not Buddhist monks, wore Bok-du (headstring), Chorip (straw hat), or Heuk-rip (black hat). In this painting, men wore a Heukrip which had a round Mojeong (crown). * The men wore sashes fastened around their waist to close their coats, which was different from the late Chosun, in which men bound their sashes around their chest. That gave a ration of the bodice of the coat to the length of the skirt of one-to-one, which was consistent with that of woman's clothing. * In this painting, we cannot see the Buddhist monk's headdress that appeared later in the Chosun, such as Gokkal (peaked hat), Songnak (nun's hat), and Gamtu (horsehair cap). These kinds of headdresses, which appeared in paintings from the seventeenth century, were worn widely inside or outside the home. Buddhist monks wore a light blue long coat, called Jangsam (Buddhist monk's robe) and wore Gasa (Buddhist monk's cope), a kind of ceremonial wrap, round their body. We can see that the Gasa was very splendid in the early years of the Chosun dynasty, a continuing tradition of Buddhist monk's costumes from the Koryo dynasty.

  • PDF

Activation Differences of Superior Parietal Lobule and Cerebellum Areas While Inferring Geometrical Figures per Intellectual Category in Adolescents (도형 과제 수행 때 나타나는 청소년의 지능별 대뇌 및 소뇌의 활성도 차이 분석)

  • Kim, Ye Rim
    • Journal of Gifted/Talented Education
    • /
    • v.23 no.5
    • /
    • pp.637-648
    • /
    • 2013
  • The relationship between the cerebral cortex and human intelligence has been studied using various methods, and related brain areas involved in intellectual manifestation have been discovered individually. Such studies have also shown the cerebellum is closely involved in various cognitive functions such as language, memory, and information processing. However, studies showing an activity difference between the cerebral cortex and cerebellum when performing specific tasks are hard to find. This study searched and analyzed the active regions of the cerebral cortex and cerebellum seen while performing the inference of geometrical figures. A WAIS intelligence test was conducted using 81 healthy boys (16.3 years of age on average), and five categories were classified. While performing the inference of shapes, their brain images were taken using functional magnetic resonance imaging (fMRI). As a result, the activity in 12 brain regions was observed, including in the cerebral cortex, the bilateral inferior parietal, the visual cortex, bilateral superior parietal, frontal-Inf-Tri-R, and bilateral caudate, while activities in 5 discrete areas were seen in the cerebellum. In particular, the higher the intelligence (IQ) of the subject, the stronger their activity. Among those with the most superior intelligence, subjects with an IQ of 140-147 showed significantly higher activity compared to the other groups. Such results seem to represent a very high utilization of intelligence in a highly gifted group, and we can expect to use this to determine the super gifted.

Do Clinical Features and Survival of Single Hormone Receptor Positive Breast Cancers Differ from Double Hormone Receptor Positive Breast Cancers?

  • Ng, Char-Hong;Pathy, Nirmala Bhoo;Taib, Nur Aishah;Ho, Gwo-Fuang;Mun, Kein-Seong;Rhodes, Anthony;Looi, Lai-Meng;Yip, Cheng-Har
    • Asian Pacific Journal of Cancer Prevention
    • /
    • v.15 no.18
    • /
    • pp.7959-7964
    • /
    • 2014
  • The significance of the single hormone receptor positive phenotype of breast cancer is still poorly understood. The use of hormone therapy has been found to be less effective for this type, which has a survival outcome midway between double positive and double negative phenotypes. The aim of this study was to investigate differences in patient and tumor characteristics and survival between double-receptor positive (ER+PR+), double receptor negative (ER-PR-) and single receptor positive (ER+PR- and ER-PR+) breast cancer in an Asian setting. A total of 1,992 patients with newly diagnosed stage I to IV breast cancer between 2003 and 2008, and where information on ER and PR were available, were included in this study. The majority of patients had ER+PR+ tumors (n=903: 45.3%), followed by 741 (37.2%) ER-PR-, 247 (12.4%) ER+PR-, and 101 (5.1%) ER-PR+ tumors. Using multivariate analysis, ER+PR- tumors were 2.4 times more likely to be grade 3 compared to ER+PR+ tumors. ER+PR- and ER-PR+ tumors were 82% and 86% respectively less likely to be grade 3 compared with ER-PR- tumors. ER-PR+ tumours were associated with younger age. There were no survival differences between patients with ER+PR+ and ER-PR+ tumors. However, ER+PR- tumors have poorer survival compared with ER+PR+ tumours. ER-PR- tumours had the worst survival. Adjuvant hormonal therapy with tamoxifen was found to have identical survival advantage in patients with ER+PR+ and ER-PR+ tumors whereas impact was slightly lower in patients with ER+PR- tumors. In conclusion, we found ER+PR- tumors to be more aggressive and have poorer survival when compared to ER+PR+ tumors, while patients with ER-PR+ tumours were younger, but had a similar survival to their counterparts with ER+PR+ tumours.

The design of Fully Differential CMOS Operational Amplifier (Fully Differential CMOS 연산 증폭기 설계)

  • Ahn, In-Soo;Song, Seok-Ho;Choi, Tae-Sup;Yim, Tae-Soo;Sakong, Sug-Chin
    • Journal of the Institute of Electronics Engineers of Korea SD
    • /
    • v.37 no.6
    • /
    • pp.85-96
    • /
    • 2000
  • It is necessary that fully differential operational amplifier circuit should drive an external load in the VLSI design such as SCF(Switched Capacitor Filter), D/A Converter, A/D Converter, Telecommunication Circuit and etc. The conventional CMOS operational amplifier circuit has many problems according to CMOS technique. Firstly, Capacity of large loads are not able to operate well. The problem can be solve to use class AB stages. But large loads are operate a difficult, because an element of existing CMOS has a quadratic functional relation with input and output voltage versus output current. Secondly, Whole circuit of dynamic range decrease, because a range of input and output voltages go down according as increasing of intergration rate drop supply voltage. The problem can be improved by employing fully differential operational amplifier using differential output stage with wide output swing. In this paper, we proposed new current mirror has large output impedance and good current matching with input an output current and compared with characteristics for operational amplifier using cascoded current mirror. To obtain large output swing and low power consumption we suggest a fully differential operational amplifier. The circuit employs an output stage composed new current mirror and two amplifier stage. The proposed circuit is layout and circuit of capability is inspected through simulation program(SPICE3f).

  • PDF