• 대한안전경영과학회지
• /
• 제25권1호
• /
• pp.23-29
• /
• 2023

Among the Additive Manufacturing (AM) technologies, the Binder-Jetting printing technology is a method of spraying an adhesive on the surface of powder and laminate layer by layer. Recently, this technique has become a major issue in the production of large casting products such as ship-building, custom vehicles and so on. In this study, we performed research to make actual mold castings and increase mechanical property by using special sand and water-based binders. For use as a mold, it has a strength of more than 3MPa and permeability. Various experiments were carried out to obtain suitable them. The major process parameters were binder jetting volume, binder types, layer thickness and heat treatment condition. As a result of this study, the binder drop quantity was measured to be about 60 pico-liter, layer thickness was 100㎛ and the heat treatment condition was measured about 1,000℃ and compressive strength were measured to be more than 5MPa. The optimum condition of this experiment was established through actual casting of aluminum. The equipment used in this study was a Freeforms T400 model (SFS Co., Ltd.), and the printing area of 420 * 300 * 250mm and resolution of 600dpi can be realized.

• 분석과학
• /
• 제20권2호
• /
• pp.176-182
• /
• 2007

본 연구는 매트릭스형의 농약 활성물질을 포함하는 서방성 수분 인지제제 및 그의 제조방법에 관한 것이다. 산을 첨가한 커들란 용액에 망목구조를 가진 매트릭스가 형성되며 이 매트릭스에 열처리를 하게 되면 수용성이 없어진다. 본 매트릭스의 망목구조는 수분이 존재조건에서 열리며 건조조건에서는 다시 닫히게 된다. 그러므로 본 서방성 제형시스템에서는 수분이 있는 조건에서만 농약 활성물질이 제형에서 방출된다. 본 서방성 제제에 따른 구성을 이용하면 농약 활성물질의 효과 발현시기를 제어할 수 있고, 약해(藥害) 등의 발생을 경감시킬 수 있다.

• 한국정밀공학회지
• /
• 제12권10호
• /
• pp.78-88
• /
• 1995

For producing iron or steel products with good quality, the concentration of the material components should be analyzed quickly with high relability using XRF(Fluorescent X-Ray Spectrometer). Since the analysis results are much dependent upon the surface con- dition, the samples have to be prepared to have good test condition. This study presents an image processing system for inspecting the surface condition of the iron test sample. In order to use thd computer vision system, we need to develop a lighting device and image processing algorithm. For the adequate lighting device of inspection system, the indirect lighting device is contrived to cut the external light and provide uniform, stable and cold light. The image processing algorithm is aimed to reduce inspection time and to get similar analyzing results to those of the experienced operators. At first, the image processing algorithm checks whether the surface of the iron sample is ground well or not. Then, the defects; hole or dig are conted and surface condition is evaluated. In addition, the algorithm gives the reliability of the analyzing results in order to help operator's decision.

• 공학교육연구
• /
• 제26권4호
• /
• pp.66-78
• /
• 2023

The purpose of this study was to analyze the actual condition of the innovative sharing university project. To this end, a focus group interview was conducted by selecting officials participating in the innovative sharing university project as study participants. The collected data was analyzed using the content analysis method. The results of the study are as follows. First, in terms of the promotion system and operation dimension of project group, study participants presented difficulties and improvements in terms of the national promotion system and university-level project operation. Second, in terms of curriculum management dimension, study participants presented difficulties and improvements in content development and sharing, engagement support for professors and students participation, and securing and sharing educational infrastructure. Third, in terms of management of project performance indicators, study participants presented difficulties and improvements in managing core performance indicators, managing autonomy performance indicators, and sharing project performance. Based on these study results, suggestions for the use of research results were presented.

• 한국작물학회:학술대회논문집
• /
• 한국작물학회 2022년도 추계학술대회
• /
• pp.120-120
• /
• 2022

Agrivoltaic System (AVS) was introduced with the concept that it could generate electricity by using the extra light remain after crops use for photosynthesis in farm, which can earn additional income. However, crop yield was declined under the AVS condition due to the decrease in light energy. In the past, many researchers have been studied about crop states under shading conditions. However, the phenomenon of partial shading such as under the AVS is not well studied. In this study, to figure out the response of crop under the different light conditions, the electron transport rate (ETR) and non-photochemical quenching (NPQ) of rice was investigated using the chlorophyll fluorescence measurement. Also, physiological changes of crops under the shading conditions were investigated. The growth experiment under partial shading under AVS and overall shading which made of 35% shade cloth was conducted to understand the eco-physiological responses of rice to light in terms of the photosynthesis. Under the shading conditions, SPAD value and chlorophyll contents were higher, but the leaf thickness was lower than control. The overall shading condition show lower ETR than others during the growing season. In contrast, NPQ was higher than other treatments. This means the available light energy cannot contribute to photosynthesis under the shading condition.

• Structural Engineering and Mechanics
• /
• 제89권6호
• /
• pp.627-634
• /
• 2024

This research deals with the process of conducting a reinforced concrete slab loading test of a Residential Complex Project at the Shatt Al Arab District which is located in southern Iraq. The purpose of the test which represents a destructive test is to evaluate the structural behavior of the slab condition state during and after the examination of the test process in order to ascertain the ability of the slab ceiling to withstand the loads generated during the use of the building. The test was carried out accordant to ACI 437.2-13 code. The reason for this test is the postponed 8 years of building project construction. Concrete blocks were used to simulate and conduct a loading test of 30-tons for 3 days. The central point has been installed to measure the slab deflection that occurred during the test. The results showed that both the total deflection and residual deflections were lesser than the permissible values according to the ACI 437.2-13, the RC slab behavior was mainly linear structural behave, and that the purpose of the examination was achieved. Finally, a new method was introduced to the assessment of the slab condition at the support which is found in good condition.

• 정보학연구
• /
• 제8권4호
• /
• pp.1-7
• /
• 2005

Investigations of high frequency current transformer(HF-CT) waveform characteristics of the surface leakage on kaolin polluted EPDM polymer insulators have been performed. This work is part of a program aimed at examining the potential for HF-CT waveform characteristics analysis to provide information about the environment contaminants and environment condition of polymer insulators. The investigation reported examined the HF-CT waveform characteristics at high frequencies. The use of high frequency measurements for on-line applications reduces electrical inference. This work was peformed utilizing HF-CT to monitor of surface polluted discharge. It was found that HF-CT waveform frequency spectrum, magnitude depend on importantly the duration of the surface discharge activity.

• 의료ㆍ복지 건축 : 한국의료복지건축학회 논문집
• /
• 제16권4호
• /
• pp.15-24
• /
• 2010

The purpose of this study is to provide the basic guideline of the archite-ctural planning and design of the women's hospital for optimizing the area compostion and spatial allcoation. The method of this study is to investigate and analyze the functional spatial composition based on the area composition and spatial allocation of the 4 departments space in women's hospital through a analysis of 9 cases study. Data collecting skills such as drawing documents analysis, field survey and observation were used to examine of the present facility condition. Hence this research is to grasp the present condition of department of the women's hospital, to inquire the area composition and spatial allocation. Finally, The derived important factors are expected to use as the basic data at the time of planning for the space programing of design women's hospital.

• ETRI Journal
• /
• 제40권2호
• /
• pp.197-206
• /
• 2018

Multiple-input multiple-output (MIMO) systems offer significant enhancements in terms of their data rate and channel capacity compared to traditional systems. However, correlation degrades the system performance and imposes practical limits on the number of antennas that can be incorporated into portable wireless devices. The use of switched parasitic antennas (SPAs) is a possible solution, especially where it is difficult to obtain sufficient signal decorrelation by conventional means. The covariance matrix represents the correlation present in the propagation channel, and has significant impact on the MIMO channel capacity. The results of this work demonstrate a significant improvement in the MIMO channel capacity by using SPA with the knowledge of the covariance matrix for all pattern configurations. By employing the "water-pouring algorithm" to modify the covariance matrix, the channel capacity is significantly improved compared to traditional systems, which spread transmit power uniformly across all the antennas. A condition number is also proposed as a selection metric to select the optimal pattern configuration for MIMO-SPAs.

• 호남수학학술지
• /
• 제38권3호
• /
• pp.661-674
• /
• 2016

In [15] they introduced a new finite element method for accurate numerical solutions of Poisson equations with corner singularities, which is useful for the problem with known stress intensity factor. They consider the Poisson equations with homogeneous Dirichlet boundary condition, compute the finite element solution using standard FEM and use the extraction formula to compute the stress intensity factor, then they pose a PDE with a regular solution by imposing the nonhomogeneous boundary condition using the computed stress intensity factor, which converges with optimal speed. From the solution we could get accurate solution just by adding the singular part. This approach works for the case when we have the accurate stress intensity factor. In this paper we consider Poisson equations with mixed boundary conditions and show the method depends the accrucy of the stress intensity factor by considering two algorithms.