• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.24 no.6
• /
• pp.133-144
• /
• 2021

This study aims to estimate location of land mammals habitat by analyzing spatial data and investigate how to apply environmental DNA monitoring methodology to lotic system in Yangpyeong-gun, Gyeonggi-do. Environmental DNA sampling points are selected through spatial analysis with QGIS open source program by overlaying Kernel density of wild boar(Sus scrofa), elevation, slope and land-cover map, and 81 samples are collected. After 240 mL of water was filtered in each sample, metabarcoding technique using MiMammal universal primer was applied in order to get a whole list of mammal species whose DNA particles contained in filtered water. 8 and 22 samples showed DNA of wild boar and water deer, respectively. DNA of raccoon dog, Eurasian otter, and Siberian weasel are also detected through metabarcoding analysis. This study is valuable that conducted in outdoor lotic system. The study suggests a new wildlife monitoring methodology integrating overlayed geographic data and environmental DNA.

• The Journal of the Convergence on Culture Technology
• /
• v.7 no.4
• /
• pp.385-390
• /
• 2021

This study aims to provide primary data for R&D on rollator-walking frame through researching the usability test of the rollator-walking frame and the effect of rollator-walking frames on the lives of senior citizens. This study surveyed 60 senior citizens living in Sungnam City in South Korea. As the result of the usability test, we can find users' dissatisfaction with the folding, weight, shape of backrest and material of chair. The survey shows that the frequency of outdoor activity is mostly increased by the convenience of product. However, the inconvenience while using facilities, such as elevators or public transportations, gave a significant impact on the decrease in going out experiences. Therefore, for better outside lifestyle of senior citizens, it is important to improve the function of the product, however, we need to make improvement of urban infrastructure.

• International Journal of High-Rise Buildings
• /
• v.12 no.2
• /
• pp.129-136
• /
• 2023

Natural ventilation has proven to be an effective passive strategy in improving energy efficiency and providing healthy environments. However, such a strategy has not been commonly adopted to tall office buildings that traditionally rely on single-skin façades (SSFs), due to the high wind pressure that creates excessive air velocities and occupant discomfort at upper floors. Double-skin façades (DSFs) can provide an opportunity to facilitate natural ventilation in tall office buildings, as the fundamental components such as the additional skin and openings create a buffer to regulate the direct impact of wind pressure and the airflow around the buildings. This study investigates the impact of modified multi-story type DSFs on indoor airflow in a 60-story, 780-foot (238 m) naturally ventilated tall office building under isothermal conditions. Thus, the performance of wind effect related components was assessed based on the criteria (e.g., air velocity and airflow distribution), particularly with respect to opening size. Computational fluid dynamics (CFD) was utilized to simulate outdoor airflow around the tall office building, and indoor airflow at multiple heights in case of various DSF opening configurations. The simulation results indicate that the outer skin opening is the more influential parameter than the inner skin opening on the indoor airflow behavior. On the other hand, the variations of inner skin opening size help improve the indoor airflow with respect to the desired air velocity and airflow distribution. Despite some vortexes observed in the indoor spaces, cross ventilation can occur as positive pressure on the windward side and negative pressure on the other sides generate productive pressure differential. The results also demonstrate that DSFs with smaller openings suitably reduce not only the impact of wind pressure, but also the concentration of high air velocity near the windows on the windward side, compared to SSFs. Further insight on indoor airflow behaviors depending on DSF opening configurations leads to a better understanding of the DSF design strategies for effective natural ventilation in tall office buildings.

• The Journal of Bigdata
• /
• v.6 no.2
• /
• pp.39-49
• /
• 2021

Recently, large and diverse weather data are being collected by sensors from various sources. Efforts to predict the concentration of fine dust through machine learning are being made everywhere, and this study intends to compare PM10 and PM2.5 prediction models using data from 840 outdoor air meters installed throughout the city. Information can be provided in real time by predicting the concentration of fine dust after 5 minutes, and can be the basis for model development after 10 minutes, 30 minutes, and 1 hour. Data preprocessing was performed, such as noise removal and missing value replacement, and a derived variable that considers temporal and spatial variables was created. The parameters of the model were selected through the response surface method. XGBoost, Random Forest, and Deep Learning (Multilayer Perceptron) are used as predictive models to check the difference between fine dust concentration and predicted values, and to compare the performance between models.

• Land and Housing Review
• /
• v.14 no.4
• /
• pp.103-110
• /
• 2023

People who spend most of their day indoors are continuously exposed to internally and externally generated indoor pollutants. According to a 2022 report from the World Health Organization (WHO), air pollution is the cause of more than 7 million deaths annually worldwide, emphasizing the seriousness of indoor air pollutants. Air pollutants include nitrogen oxides (NOx), formaldehyde (HCHO), and volatile organic compounds (VOCs), which have serious effects on the human body. Photocatalyst is a material that can remove these indoor air pollutants. Photocatalysts not only have the ability to remove dust precursors, but also have antibacterial, sterilizing, and deodorizing functions, making them effective in improving indoor air quality. This study suggests areas and methods in which photocatalysts can be applied to buildings. Fields of application include interior and exterior construction materials such as concrete, as well as organic paints and ventilation devices. If appropriate utilization plans are developed, it may be possible to improve the built environment through reduced indoor and outdoor pollutant levels.

• International conference on construction engineering and project management
• /
• 2024.07a
• /
• pp.585-594
• /
• 2024

In recent years, the construction industry has rapidly adopted offsite-manufacturing and distributed construction methods. This change brings a variety of challenges requiring innovative solutions, such as the utilization of AI-driven and generative design. Numerous studies have explored the concept of multi-objective generative design with genetic algorithms in construction. However, this paper highlights the challenges and proposes a solution for combining generative design with distributed construction to address the need for agility in design. To achieve this goal, the research delves into the development of a multi-objective generative design optimization using a weighted genetic algorithm based on simulated annealing. The specific design case adopted is an educational complex. The proposed process strives for scalable economic viability, environmental comfort, and operational efficiency by optimizing modular configurations of architectural spaces, facilitating affordable, scalable, and optimized construction. Rhino-Grasshopper and Galapagos design tools are used to create a virtual environment capable of generating architectural configurations within defined boundaries. Optimization factors include adherence to urban regulations, acoustic comfort, and sunlight exposure. A normalized scoring approach is also presented to prioritize design preferences, enabling systematic and data-driven design decision-making. Building Information Modeling (BIM) tools are also used to transform the optimization results into tangible architectural elements and visualize the outcome. The resulting process contributes both to practice and academia. Practitioners in AEC industry could gain benefit through adopting and adapting its features with the unique characteristics of various construction projects while educators and future researchers can modify and enhance this process based on new requirements.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.38 no.2
• /
• pp.1-8
• /
• 2010

The purpose of the study was to evaluate the influence of landscaping pavements on WBGT(Wet-Bulb Globe Temperature) of outdoor spaces that lack ventilation and shade at summer midday. The relative humidity(RH), dry-bulb temperature(DT) and globe temperature(GT) were recorded every minute from June to October 2009 at a height of 1.2m above ten experimental beds with different pavements, by a measuring system consisting of an electric humidity sensor(GHM-15), resistance temperature detector(RTD, Pt-100), standard black globe(${\phi} 150mm$) and data acquisition systems(National Instrument's Labview and Compact FieldPoint). Additionally, the surface dry-bulb temperatures also were recorded and compared. The area of each experimental bed was 1.5m(W)${\times}$2.0m(L) and ten different kinds of pavement were used including grass, grass+cubic stone, grass+porous brick, brick, stone panels, cubic stone, interlocking blocks, clay brick, naked soil, gravel and concrete. To prevent interference from ventilation, a 1.5m height cubic steel frame was established around each bed and each vertical side of the frame was covered with transparent polyethylene film. Based on the records of the hottest period from noon to 3 PM on 26 days with a peak dry-bulb temperature over $30^{\circ}C$ at natural condition, the wet-bulb temperature(WT) and WBGT were calculated and compared. The major findings were as follows: 1. The average surface DT was $40.1^{\circ}C$, which is $9^{\circ}C$ higher than that of the natural condition. The surface DT of the pavements with grass were higher than those of concrete and interlocking block. The peak DT of the surface almost every pavement rose to above $50^{\circ}C$ during the hottest time. 2. The averages of DT, WT and GT were $40.1^{\circ}C$, $27.5^{\circ}C$ and $49.1^{\circ}C$, and the peak values rose to $48.1^{\circ}C$, $45.8^{\circ}C$ and $59.5^{\circ}C$, respectively. In spite of slight differences that resulted according to pavements, no coherent differentiating factor could be found. 3. The average WBGT of grass was the highest at $34.3^{\circ}C$ while the others were similar in the range of around $33{\pm}1^{\circ}C$. Meanwhile, the peak WBGT was highest with stone panel at $47.9^{\circ}C$. Though there were some differences according to pavements, and while grass seemed to be worst in terms of WBGT, it seems difficult to say ablolutely that grass was the worst because the measurement was conducted without ventilation and shade during summer daytime hours only, which had temperatures that rose to a dangerous degree(above $45^{\circ}C$ WBGT), withering the grass during the hottest period. The average WBGT resulted also showed that the thermal environment of the pavement without ventilation and shade were at an intolerable level for humans regardless of the pavement type. In summary, the results of this study show that ventilation and shade are more important factor than pavement type in terms of outdoor thermal comfort in summer daylight hours.

• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.31 no.1
• /
• pp.28-37
• /
• 2013

As a symbolic landscape of Seoul, Namsan has undergone not only physical changes but also changes in its human use and characteristics. At this point, research on Namsan, which holds diverse stories that have accumulated over a long period, as a cultural landscape is necessary. In particular, a concrete understanding of the characteristics of the mountain's use in the period of its initiation as a modern park is an important task in research on the history of urban parks. Consequently, the purpose of the present study lies in grasping the use of Namsan at the time of the establishment of Kyongsungbu Namsan Park Design Proposal in 1917 and examining the characteristics per space. The research process was based on the status of the park design plan. The primary source of information came from the analysis of historical newspaper articles. Additional materials including documents, old maps, photographs, postcard materials were also used. The period of the study was 1883 to 1917. This time was the initial period of Namsan Park soon after the opening up of Korea's ports to the world. The major spaces in which Namsan was used as a park encompassed Hanyang Park, Waeseongdae Park, Noin-jeong, Jangchung-dan, and remaining parts of Namsan in a natural state. When the main ways in which each space is used are examined based on the data analyzed, Namsan has been used for purposes including public events, accidents, religious worship, track and field days, field trips, and strolls. When the nature of each of the spaces is determined in terms of the characteristics of their use, these spaces were characterized as community parks, outdoor community spaces, indoor community spaces, sports arenas, and natural parks, among other things. The present study is significant in terms of research on the history of parks for confirming that Namsan in the initial period already served as a modern park for urban activities and grasping the specific urban activities that were engaged in on Namsan.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.49 no.4
• /
• pp.15-29
• /
• 2021

The study aims to grasp the perception and appraisal of urban park users through text analysis. This study used Google review data provided by Google Maps. Google Maps Review is an online review platform that provides information evaluating locations through social media and provides an understanding of locations from the perspective of general reviewers and regional guides who are registered as members of Google Maps. The study determined if the Google Maps Reviews were useful for extracting meaningful information about the user perceptions and appraisals for parks management plans. The study chose three urban parks in Seoul, South Korea; Seoul Forest, Boramae Park, and Olympic Park. Review data for each of these three parks were collected via web crawling using Python. Through text analysis, the keywords and network structure characteristics for each park were analyzed. The text was analyzed, as were park ratings, and the analysis compared the reviews of residents and foreign tourists. The common keywords found in the review comments for the three parks were "walking", "bicycle", "rest" and "picnic" for activities, "family", "child" and "dogs" for accompanying types, and "playground" and "walking trail" for park facilities. Looking at the characteristics of each park, Seoul Forest shows many outdoor activities based on nature, while the lack of parking spaces and congestion on weekends negatively impacted users. Boramae Park has the appearance of a city park, with various facilities providing numerous activities, but reviewers often cited the park's complexity and the negative aspects in terms of dog walking groups. At Olympic Park, large-scale complex facilities and cultural events were frequently mentioned, emphasizing its entertainment functions. Google Maps Review can function as useful data to identify parks' overall users' experiences and general feelings. Compared to data from other social media sites, Google Maps Review's data provides ratings and understanding factors, including user satisfaction and dissatisfaction.

• Analytical Science and Technology
• /
• v.17 no.6
• /
• pp.496-513
• /
• 2004

This study was carried out to evaluate the performance of sampling and analytical methodology used for the measurement of toxic volatile organic compounds (VOCs) in the ambient air. VOCs were determined by the adsorbent tube sampling and automatic thermal desorption coupled with GC/MSD analysis. Target analytes were 33 compounds including major aromatic compounds such as BTEX, and halogenated compounds. The methodology was investigated with a wide range of different adsorbents which are commercially available and have been frequently adopted for the VOC measurement. A total of 10 adsorbents were tested in this study: 6 carbon-based adsorbents such as Carbotrap, Carbopack B, Carbosieve S-III, Carboxen 1000, Carbotrap C, Activated Charcoal; and 4 polymer-based adsorbents including Tenax, Porapak Q, Chromosorb 102, and Chromosorb 106. The sampling performance was evaluated with respect to the sampling capacity of VOCs with single-adsorbent and multiple-adsorbents methods for standard samples and field samples. As a result, the best adsorbents for single-adsorbent method in the sampling of toxic organic compounds (including benzene, toluene, xylenes etc.) appeared to be Carbotrap, Carbopack B and Tenax TA. On the other hand, Chromosorb 102, Chromosorb 106 and Porapak Q were found to be unsuitable adsorbents for VOC measurement based on thermal desorption method. Multi-adsorbent packings were evaluated with 4 carbon-based adsorbents, which classified by 3 combination sets of double adsorbents and 2 combination sets of triple adsorbents. The results indicated that the most suitable combination for toixc VOC measurements is Carbotrap C with Carbotrap. Multi-sorbents tubes packed with a strong adsorbent such as Carbosieve S-III or Carboxen 1000 were found to be relatively unsuitable for several compounds, not only owing to the effect of migration of adsorbed compounds from weaker adsorbent to stronger adsorbent, but to hydrophobic nature of the adsorbents. Therefore, it should be addressed that selection of a proper adsorbent (or combination of multi sorbents) is extremely important to obtain reliable data for the concentrations of toxic VOCs in indoor and outdoor environments.