• Journal of the Korean Institute of Educational Facilities
• /
• v.10 no.3
• /
• pp.5-13
• /
• 2003

This paper is a series of study for the development of rural elementary school facilities model applying to the regional characteristics. Therefore, main theme of this paper is to pile up and analysis of elementary school facilities data in Po Cheon through a series of actual survey and interview with teachers. The results are summarized as follows ; First of all, in case of Po Cheon, it needs to study for urban model type as well as rural elementary school facilities model type. Second, extension type of buildings has separated as three types-zigzag extension type, vertical & horizontal extension type, separate building type. But another characteristics, such as type of site plan, type of corridor and module of classroom unit, outdoor space and elevation design, are monotonous. Third. the results of this analysis show that it is desirable to locate houses for teachers within boundaries. Finally, the future paper needs to be studying more various module of classroom unit, extension type, space program, type of floor plan and site plan.

• Journal of the Korean Solar Energy Society
• /
• v.34 no.6
• /
• pp.27-37
• /
• 2014

Heat island is caused by changes of land coverage structure of cities and use of energy in buildings. As a result energy use in buildings get to increase further followed by rising of GHG emission and deteriorating climate change. Eco-friendly housing complex is a kind of plan that applies environmental control elements like water and green spaces to housing complex. With these methods, it can be expected to create thermal environment of indoor and outdoor. In this paper quantitative examination is studied on using CFD to find out the effects of river, water permeable, parks and planting on thermal environment. And by comparing field measurements with CFD results which are aimed to development phase housing complex, feasibility and usability of the CFD analysis results are confirmed. And also, analysis on the ventilation performance followed by natural ventilation system is analyzed by selecting one building in housing complex. Based on the results, the possibilities of energy reduction through making thermal environment and applying natural ventilation are studied. With these outcomes, creating thermal conditions and using natural ventilation would be contributed to GHG reduction.

• International Journal of High-Rise Buildings
• /
• v.6 no.1
• /
• pp.101-111
• /
• 2017

The objective of this study is to determine the effectiveness of a modified air-side economizer in improving indoor air quality (IAQ). An air-side economizer, which uses all outdoor air for cooling, affects the building's IAQ depending on the outside air quality and can significantly affect the occupants' health, leading to respiratory and heart disease. The Air Quality Index (AQI), developed by the US Environmental Protection Agency (US EPA), measures air contaminants that adversely affect human beings: PM10, PM2.5, SO2, NO2, O3, and CO. In this study, AQI is applied as a control for the operation of an air-side economizer. The simulation is analyzed, comparing the results between the differential enthalpy economizer and AQI-modified economizer. The results confirm that an AQI-modified economizer has a positive effect on IAQ. Compared to the operating differential enthalpy economizer, energy increase in an operating AQI-modified economizer is 0.65% in Shanghai and 0.8% in Seoul.

• Journal of Korean Society for Geospatial Information Science
• /
• v.24 no.2
• /
• pp.25-35
• /
• 2016

Since a sophisticated location determination technology (LDT) is necessary for accurate positioning in urban area environments, numerous studies related to the LDT using the RFID (Radio Frequency IDentification) technology have been implemented for real-time positioning and data transferring. However, there are still lots of unsolved questions especially regarding what to use as base stations and what are corresponding results under the intrinsic complexity of alignment and configuration of components used for the RFID positioning. This study proposes the street light fixtures as base stations where the RFID receivers will be embedded for the mobile tracking scheme. As street light fixtures are usually installed at a certain distance interval, they can be used as base stations for the RFID receiver installation. Using the principle of the single row triangle network, the RFID receiver organization is determined based on the experiments such as recognition distance measurement and tag position accuracy estimation at inside and outside of the single row triangle network. The results verify that the mobile tracking scheme which uses RFID-embedded street light fixtures, suggested and configured in this study, is effective for the real-time outdoor positioning.

• Asian Journal of Atmospheric Environment
• /
• v.2 no.1
• /
• pp.60-67
• /
• 2008

The spatial limitations of urban environments in general lead to invention and design of a wide range of underground transportation systems such as subways, underground roads and paths, etc. Among them, the application of subway systems in metropolitan cities is most commonly observed to ease those confronted difficulties on this purpose. It in turn leaves passengers and workers to be exposed to indoor air potentially polluted by various sources existing in this underground environment. Specifically when considering the IAQ in a subway station, there exist many IAQ-related parameters to be counted either as individual or as integrated exposures. In this study, a model system has been developed to manage the general IAQ in a subway station. Field survey and $CO_2$ measurements were initially conducted to analyze and understand the relationship between the indoor and outdoor air quality while considering the internal pollution sources such as passengers, subway trains, etc. The measurement data were then employed for the model development with other static information. For the model development, the algorithm of simple continuity was built and applied to model the subway IAQ concerned. In this paper, the recent updated draft version of model developed will be reported and demonstrated.

• International Journal of High-Rise Buildings
• /
• v.1 no.2
• /
• pp.99-105
• /
• 2012

The higher the building height and the larger the temperature difference between the outdoor and indoor space, the more remarkable is the draft driven by the stack effect in high-rise buildings. Moreover, the stack effect can bring about the deterioration of habitability and the degradation of the performance of the indoor control system in high-rise buildings. In this study, as a measure to attenuate the stack effect, the E/V shaft cooling method was proposed and its performance was compared with the conventional stack effect control method for strengthening the air-tightness of the building using a numerical simulation method. The total decreasing ratios on the stack effect in a building were compared, and the probabilities of the secondary problems were analyzed. The results show that the E/V shaft cooling is very effective to decrease the stack effect in a high-rise building in terms of the reduction performance and application. Moreover, this method does not cause secondary problems, such as stack pressure transition to other walls, unlike the conventional stack effect mitigation method.

• ETRI Journal
• /
• v.40 no.1
• /
• pp.26-38
• /
• 2018

To overcome considerable path loss in millimeter-wave propagation, high-gain directional beamforming is considered to be a key enabling technology for outdoor 5G mobile networks. Associated with beamforming, this paper investigates propagation power loss characteristics in two aspects. The first is beamwidth effects. Owing to the multipath receiving nature of mobile environments, it is expected that a narrower beamwidth antenna will capture fewer multipath signals, while increasing directivity gain. If we normalize the directivity gain, this narrow-beamwidth reception incurs an additional power loss compared to omnidirectional-antenna power reception. With measurement data collected in an urban area at 28 GHz and 38 GHz, we illustrate the amount of these additional propagation losses as a function of the half-power beamwidth. Secondly, we investigate power losses due to steering beam misalignment, as well as the measurement data. The results show that a small angle misalignment can cause a large power loss. Considering that most standard documents provide omnidirectional antenna path loss characteristics, these results are expected to contribute to mmWave mobile system designs.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.29 no.6
• /
• pp.21-26
• /
• 2002

The propose of this study is to suggest objective data to be utilized for a plan and the improvement of open space through the analysis of people's behaviour and satisfaction after the introduction of an opened-fence around offices followed by a plan for wall-afforestation of public institution's. The sites examined are four offices; two of them have opened-walls and the others have traditional enclosure. Analysis of frequency is conducted to understand the actual use according to people's individual peculiarities. Pearson's correlation analysis, t-test, multiple regression analysis are carried out to find out relations of fluents. In the end, the satisfaction is high in public institution satisfaction, entrance, space perception. stability, Landscaped office with opened-fence rather than fence, and the increase in usage of fluent of public institution satisfaction, entrance, space perception. stability, confusion brings about rising of use-satisfaction. Satisfaction with the exterior of building is the most important variable that influences the whole urban open space. Furthermore the influences of the approach and stability having connection with open or not-open fence is major variable affecting satisfaction of use of open space. Whether open or not is important factor on satisfaction of open space of office building. Through this study, we can find that opened fence determines use satisfaction of resting space of outdoor-office. So factors affecting satisfaction must be regarded as important requisite on planning, design, development and management in plan for afforestation of fence at public institution.

• Electronics and Telecommunications Trends
• /
• v.37 no.2
• /
• pp.83-95
• /
• 2022

5G goes beyond people to serve indoor and outdoor companies and industries, as well as campuses such as halls, industrial complexes, educational institutions, stadiums, dense urban areas, rural areas, and government institutions. Therefore, a new approach to small cells is needed. Accordingly, 3GPP and Small Cell Forum are researching 5G small cell architecture; 3GPP, Small Cell Forum, and 5G Alliance for Connected Industries and Automation are also researching private networks tailored to meet the specific requirements of various companies and local governments. In particular, in the UK, a small cell-based technology is required for realizing the Joint Operator Technical Specifications-Neutral Host In-Building specification to cost-effectively secure indoor coverage. Further, the research on the SON(Self-Organizing Network) technology for small cells in 5G, where commercialization has begun, is required. The 5G-based small cell structure, private network, and Neutral Host In-Building and SON reviewed in this study are at the initial research stages; therefore, additional research is needed to secure the competitiveness of the small cell technology in 5G and Beyond 5G.

• Journal of the Korean Society of Safety
• /
• v.37 no.4
• /
• pp.101-112
• /
• 2022

Expanding urbanization practices result in high numbers of buildings being developed in city centers. This high building concentration leads to an increased fire risk, resulting in higher casualty rates and increased economic damages compared to fires in the past. The purpose of this study was to analyze the structural behavior of fire-damaged reinforced concrete buildings using analytical methods and to suggest methods of improving fire resistance in the event of a fire. Damage levels were measured using commercial software to apply the finite element method, ABAQUS, and MIDAS GEN to the dataset. Load-deflection curves were calculated using the effective area and moment of inertia of the fire-damaged columns provided by ABAQUS. The results of this analysis indicate that fire-damaged beams with experience greater deflection from indoor fires than they will from outdoor fires. Fires that occurred on the middle floors were more dangerous than those occurring on higher floors, and eccentrically loaded columns experienced more damage than axially loaded columns. The results indicate that these methods accurately predict structural behaviors of fire damaged concrete columns by considering fire exposure area and eccentric loading.