• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.4 no.3
• /
• pp.55-65
• /
• 2001

The hydrological cycle system in the city is generally characterized by quick runoff, bad infiltration, low evaporation rate, and so on. It is caused by sealing greens up with pavements. Also, there are lots of contradictory environmental problems, such as inundation, the lack of underground water and dryness in the city, caused by the urban drainage system which is mostly focused on the quick draining off rainfall. In addition, the technique joining rain and sewage, which has more dangers of inundation, occupies 66% between two Korean drainage systems which consist of joining and dividing system. There has been some need to convert the present drainage system into the environmentally friendly hydrological cycle system. This is a theoretical study to examine some foreign cases and suggested applicable methods in our country, focusing on the environmentalyl friendly system of rainfall drainage. The precipitation treatment system can be made up of some possible phases choosing from premanagement, utilization, infiltration, retention, and inducement phases. Therefore, this study mostly focused on infiltration, retention, and inducement phases. It is necessary to suggest the multifunctional utilization of outdoor spaces, especially applying in new constructing and re-constructing residential estates.

• Journal of Korean Society of Water and Wastewater
• /
• v.19 no.5
• /
• pp.647-654
• /
• 2005

Recently, the economic losses caused by inundation are increasing due to the urbanization and industrialization, i.e., intensive land utilization and concentration of population and properties. It is regarded that the role of the storm sewer systems in urban areas becomes more important as one of the effective countermeasures for reducing the inundation losses. In this study, the effects of rainfall design frequency enhancement on the construction cost of the storm sewer systems were analyzed by increasing the design frequency from the present design frequency of the sewer systems, which is 5~10 years, to 15 years, 20 years and 30 years. The change rate functions of the design discharge and construction cost based on the various design frequencies were derived by regression analysis. According to the analysis, change the rate of design discharge at 15, 20, 30 years rainfall design frequencies were increased by 10%, 17.1%, and 27.2%, respectively, when compared to that at 10 year frequency. Furthermore, it was found that by increasing the design frequency from 10 years to 15 years, 20 years and 30 years, the construction costs were increased by 5.0%, 8.0% and 12.4%, respectively. Finally, their reliabilities need to be tested by applying the rate functions to the real storm sewer districts.

• Journal of Environmental Impact Assessment
• /
• v.23 no.1
• /
• pp.39-50
• /
• 2014

In recent years, the frequency and scale of the natural disasters are growing rapidly due to the global climate change. In case of the urban flooding, high-density of population and infrastructure has caused the more intensive damages. In this study, we analyzed the spatial characteristics of urban flooding damage factors using GWR(Geographically Weighted Regression) for effective disaster prevention and then, classified the causes of the flood damage by spatial characteristics. The damage factors applied consists of natural variables such as the poor drainage area, the distance from the river, elevation and slope, and anthropogenic variables such as the impervious surface area, urbanized area, and infrastructure area, which are selected by literature review. This study carried out the comparative analysis between OLS(Ordinary Least Square) and GWR model for identifying spatial non-stationarity and spatial autocorrelation, and in the results, GWR model has higher explanation power than OLS model. As a result, it appears that there are some differences between each of the flood damage areas depending on the variables. We conclude that the establishment of disaster prevention plan for urban flooding area should reflect the spatial characteristics of the damaged areas. This study provides an improved understandings of the causes of urban flood damages, which can be diverse according to their own spatial characteristics.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.40 no.3
• /
• pp.273-283
• /
• 2020

Because of climate change, the occurrence of localized and heavy rainfall is increasing. It is important to predict floods in urban areas that have suffered inundation in the past. For flood prediction, not only numerical analysis models but also machine learning-based models can be applied. The LSTM (Long Short-Term Memory) neural network used in this study is appropriate for sequence data, but it demands a lot of data. However, rainfall that causes flooding does not appear every year in a single urban basin, meaning it is difficult to collect enough data for deep learning. Therefore, in addition to the rainfall observed in the study area, the observed rainfall in another urban basin was applied in the predictive model. The LSTM neural network was used for predicting the total overflow, and the result of the SWMM (Storm Water Management Model) was applied as target data. The prediction of the inundation map was performed by using logistic regression; the independent variable was the total overflow and the dependent variable was the presence or absence of flooding in each grid. The dependent variable of logistic regression was collected through the simulation results of a two-dimensional flood model. The input data of the two-dimensional flood model were the overflow at each manhole calculated by the SWMM. According to the LSTM neural network parameters, the prediction results of total overflow were compared. Four predictive models were used in this study depending on the parameter of the LSTM. The average RMSE (Root Mean Square Error) for verification and testing was 1.4279 ㎥/s, 1.0079 ㎥/s for the four LSTM models. The minimum RMSE of the verification and testing was calculated as 1.1655 ㎥/s and 0.8797 ㎥/s. It was confirmed that the total overflow can be predicted similarly to the SWMM simulation results. The prediction of inundation extent was performed by linking the logistic regression with the results of the LSTM neural network, and the maximum area fitness was 97.33 % when more than 0.5 m depth was considered. The methodology presented in this study would be helpful in improving urban flood response based on deep learning methodology.

• Journal of Korea Water Resources Association
• /
• v.57 no.6
• /
• pp.371-383
• /
• 2024

The quantification methods and definitions of resilience vary and are studied across many fields. However, this diversity can lead to gaps in interpretation regarding the meaning and indicators of resilience, potentially having a negative impact on resilience assessments. Therefore, uniform standards for defining and quantifying resilience are essential. This study presented a definition of resilience and socio-structural evaluation methods of resilience through network analysis. Furthermore, through analyzing various definitions of resilience, the definition of resilience in the context of urban flooding was presented. Distinguishing between static and dynamic resilience, an evaluation method based on common attributes was proposed. Lastly, the economic effects of introducing resilience were analyzed using an inundation trace map. Future research on the secondary effects through standardized resilience assessments is expected to be widely utilized in decision-making stages within urban flood policies.

• Journal of Korea Water Resources Association
• /
• v.49 no.12
• /
• pp.981-993
• /
• 2016

This study explains the GIS database of flood inundation area developed for Samsung-1 Drainage Sector, Seoul, Korea. The XP-SWMM dual drainage model was developed for the study area, and the time series observed at the watershed outlet was used to obtain the watershed time of concentration and to calibrate the XP-SWMM model. The rainfall scenario was developed by dividing the 40 minute watershed time of concentration into two 20-minute time steps and then applying the gradually increasing 5 mm/hr interval rainfall intensity to each of the time step up to 200 mm/hr, which is the probable maximum precipitation of the study area. The developed rainfall scenarios was used as the input of the XP-SWMM model to obtain the database of the flood inundation area. The analysis on the developed GIS database revealed that: (1) For the same increment of the rainfall, the increase of the flooded area can be different, and this was caused by topographic characteristics and spatial formation of pipe network of the study area; (2) For the same flooded area, the spatial extent can be significantly different depending on the temporal distribution of rainfall; and (3) For the same amount of the design rainfall, the flood inundation area and the extent can be significantly different depending on the temporal distribution of rainfall.

• Journal of Korean Society on Water Environment
• /
• v.31 no.2
• /
• pp.120-133
• /
• 2015

Due to increasing impervious surfaces resulting from urbanization and industrialization which are directly linked to urban inundation and non-point pollutants runoff, there is a need to manage them systematically. A management over urban impervious surfaces calls for pervious/impervious maps, which enable viewing the distribution of impervious surfaces. Nevertheless, relevant data are absent as now. In this respect, despite the diversity of proposed methods, pilot implementation and accuracy verification have never been conducted. Therefore, this study is aimed to produce a pilot pervious/impervious map based on previously proposed methods and to elucidate its pros and cons with a view to proposing a method for producing a GIS-based optimal pervious/impervious map. Following previously proposed methods, a pervious/impervious map of Bupyeong-gu, Incheon was produced. Then, a method of producing optimal pervious/impervious maps applicable to urban areas was proposed through the comparison of pros and cons of relevant spatial data. As a result, the map had been confirmed 99.2% of classification accuracy. Based on the present findings, future studies should establish a standardized method for producing. Also, this method should be used to produce pervious/impervious maps of other regions so that it can be applied to managing impervious surfaces in major urban areas nationwide.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.18 no.2
• /
• pp.92-104
• /
• 2015

In order to analyze the impacts of climate change, a time and space integrated model was developed in this study using system dynamics and GIS. The model built was used to carry out a simulation on the inundation impact on A-gu of Busan Metropolitan city resulting from the sea level rise scenario of IPCC and storm surge, which is the worst case. Through this, the flooded area and population until 2100 were predicted. Also, the result and significance of each alternative was reviewed improving the model by establishing alternative scenarios of protection, accommodation and retreat as plans of reaction to sea level rise. The combination of system dynamics and GIS has advantages of how the diverse variables change until the target year can be traced and, accordingly, not only the results but also the processes of spatial change can be examined by calculating the value of change process at each time step. The synergy of this model presumed to be a foothold for solving problems which are becoming difficult to predict due to increase in uncertainty and complexity such as the support for decision making for urban resilience to natural disasters.

• Journal of Korea Water Resources Association
• /
• v.52 no.3
• /
• pp.227-234
• /
• 2019

The vulnerability of urban disasters is increased with the rapid urbanization and industrialization, and the extreme rainfall event is increased due to the global climate change. Urban inundation is also increased due to the extreme rainfall event beyond the capacity limit of facility for the damage prevention. The underground detention vault and the underground drain tunnel are rapidly being utilized to prevent urban inundation. Therefore, the hydraulic review and design analysis of the inlet of the underground facility are important. In this study, the water level of the approach flow according to the inflow discharge is measured and the flow characteristic of the inlet (tangential and spiral) is analyzed. For the spiral inlet, the multi-stage is introduced at the bottom of the inlet to improve the inducing vortex flow at low discharge conditions. In case of the tangential inlet, the discharging efficiency is decreased rapidly with hydraulic jump in the high flow discharge. The rising ratio of the water level in the multi-stage spiral inlet is higher than the tangential inlet, but the stable discharging efficiency is maintained at low and high discharge conditions. And the empirical formula of water level-flow discharge is derived in order to utilize inlets used in this study.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.30 no.5B
• /
• pp.479-486
• /
• 2010

Reliable hydrologic data acquisition is the basic and essential requirement for efficient water management. Especially the acquisition of various stream data in a certain location is very important to construct on alarm system to response an urban flood which occurs frequently due to the effect of climate change. Although the frequency of stream inundation flood occurrence becomes low owing to the consistent stream improvement, the urban flood due to the drainage system problems such as deterioration and bad management occurs continuously. The consistent management and current status understanding of the urban drainage system is essential to reduce the urban flood. The purpose of this study is to develop the urban runoff network flow velocity monitoring system which has the capability of collecting stream data whenever, wherever and to whomever without expert knowledge using Code Division Multiple Access technique and Bluetooth near-distance wireless communication technique. The urban runoff network flow velocity monitoring system consists of three stages. In the first stage, the stream information obtained by using ubiquitous floater is transferred to the server computer. In the second stage, the current state of the urban drainage system is assessed through the server computer. In the last stage, the information is provided to the user through a GUI. As a result of applying, the developed urban runoff network flow velocity monitoring system to Woncheon-Stream in Suwon, the information necessary for urban drainage management can be managed in real time.