• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2006.05a
• /
• pp.457-458
• /
• 2006

A method for obtaining smooth, jerk bounded feed rate profile in high speed machining has been developed. This study proposes a NURBS interpolator based on adaptive feed rate control with a well developed look ahead algorithm which takes into account the machining dynamics as well. Limitation of jerk and proportional torque rate result in smoothened loads on the machine which effectively reduces excitation of the resonant frequencies of the machine. It is found that the values of the feed rate of the down stream sharp corner have profound effect on the feed rate of the upstream sharp corners. By using a windowing scheme the feed rate profile obtained after look ahead method is re-interpolated to reduce the jerk related problems. This is compared with the adaptive NURBS interpolator to show the effectiveness of the proposed method. Simulation results indicate that the consideration of 'ripple effect' is important in avoiding jerk and thereby increasing the machining accuracy.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.10 no.2
• /
• pp.90-99
• /
• 2007

We demonstrate an 80km-reach 64-channel DWDM-PON based on wavelength-locked F-P LDs by changing the position of the C-band BLS for upstream channels from the CO to the RN. It mitigates the necessity of the high power C-band BLS and its handling problems. It also reduces back scattering induced penalty. We obtained less than $10^{-6}$ PLRs in all 128channels through 80km SMF. We also demonstrate a 240km-reach DWDM-PON based on wavelength-locked F-P LDs by adding a bidirectional erbium-doped fiber amplifier(EDFA). We show packet-loss-free transmission in all 128channels at 125 Mb/s per channel over 240km SMF We report the detuning effect of arrayed waveguide gratings(AWGs) and crosstalk effect in the implemented system. We Propose an architecture of a next generation defense wire communication system with the demonstrated long-reach DWDM-PON.

• Journal of Korean Society of Water and Wastewater
• /
• v.36 no.4
• /
• pp.219-228
• /
• 2022

In this study, we propose a flow velocity evaluation scheme based on pressure measurement in pressurized pipeline systems. Conservation of mass and momentum equations can be decomposed into mean and perturbation of pressure head and flowrate, which provide the pressure head and flowrate relationship between upstream and donwstream point in pressurized pipeline system. The inverse impedance formulations were derived to address measured pressure at downstream to evaluation of flow velocity or pressure at any point of system. The convolution of response function to pressure head in downstream valve provides the flow velocity response in any point of the simple pipeline system. Simulation comparison between traditional method of characteristics and the proposed method provide good agreements between two distinct approaches.

• Journal of the Korea Society of Computer and Information
• /
• v.14 no.7
• /
• pp.97-103
• /
• 2009

This paper proposes efficient routing scheme named MP-DD(MultiPath-Direct Diffusion) which is simple enough to be applicable to the wireless sensor networks. Conventional DD uses only one optimal path, therefore it consumes more energy of specific nodes. MP-DD uses multiple path and has a information of hop upstream node in the direction of the base-station is determined which are obtainable via the process of self-organization of the network. Simulation results show the feasibility of the simple routing schemes for the sensor networks.

• Journal of Korean Society of Water and Wastewater
• /
• v.37 no.6
• /
• pp.437-446
• /
• 2023

We propose a transient evaluation scheme using a pressure measurement in a complicate pipeline systems. Conservation of mass and momentum equations in time domain can be transformed into a pressure head and flowrate relationship between upstream and downstream point in frequency domain. The impedance formulations were derived to address measured pressure at downstream to evaluate of flowrate or pressure head at any point of system. Both branched pipeline element and looped pipeline element can be generally addressed in the platform of the basic reservoir pipeline valve system. The convolution of time domain response function with measured pressure head from a downstream point provides flowrate or pressure head response in any point of the designated pipeline system. The proposed method was validated through comparison between traditional method of characteristics and the proposed method in several hypothetical systems.

• Journal of the Society of Naval Architects of Korea
• /
• v.32 no.1
• /
• pp.42-57
• /
• 1995

An efficient and accurate scheme has been constructed by taking advantages of the hi-quadratic spline scheme and the higher-order boundary element method selectively depending on computation domains. Boundary surfaces are represented by 8-node boundary elements to describe curved surfaces of a ship and its neighboring free surface more accurately. The variation of the velocity potential complies with the characteristics of the 8-node element on the body surface. But on the free surface, it is assumed to follow that of the hi-quadratic spline scheme. By which, the free surface solution is free from numerical damping and has better numerical dispersion property. As numerical examples, steady and unsteady Neumann-Kelvin problems are considered. Numerical results for a submerged spheroid, Series 60($C_B=0.6$) and a modified support the proposed method. Finally, a new upstream radiation condition is derived using a wave equation operator in order to deal with problems for subcritical reduced frequency. The relevance of this operator has been confirmed in the case of unsteady Kelvin source potential.

• Journal of KIISE:Information Networking
• /
• v.35 no.3
• /
• pp.215-226
• /
• 2008

As sensor networks are used in various and dynamic applications, the function of sink-to-sensors reliable multicasting such as for task reprogramming is newly required. NAK-based error recovery schemes have been proposed for energy efficient reliable multicasting. However, these schemes have incompleteness problems such as the last packet loss. This paper introduces an ACK-based error recovery scheme, RM2I(Reliable Multicast with Implicit ACK and Indirect Recovery). It utilizes wireless multicast advantage in which a packet may be delivered to all of its omni-directional neighbor nodes. When a sender overhears a packet which its receiver forwards to the next nodes, it may interpret it as an ACK from the receiver. We call it an Implicit ACK. In Indirect Recovery, when a node receives a packet from neighbor nodes which are not its direct upstream node, it saves and utilizes it for error recovery. Using NS-2 simulator, we have analyzed their effects. We have also compared RM2I with the NAK-based error recovery scheme. In results, RM2I shows comparable performances to the ideal NAK-based scheme, except where Implicit ACK and Indirect Recovery do not occur at the edges of the networks.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.31 no.5B
• /
• pp.449-455
• /
• 2006

Due to advance in multimedia applications and integrated Internet services, the optical access networks have been actively studied. In particular, Ethernet passive optical network (EPON) has received much attention due to high bandwidth provision with low cost. In EPON system, the data transmission is carried out in two directions: downstream (from OLT to ONU) and upstream (from ONU to OLT). The downstream data is broadcasted to every ONUs, while the upstream data is point-to-point transmitted between each ONU and OLT, where the uplink is shared by all ONUs in the form of TDMA. The bandwidth allocation algorithm is required to efficiently manage the bandwidth on the uplink. The limited algorithm was proposed to enhance the capability of dynamic bandwidth allocation. In this paper, we propose the adaptive limited algorithm to enhance the shortcomings of limited algorithm. The adaptive limited algorithm enhances the dynamics on bandwidth allocation, and at the same time controls the fairness on packet delay. Through the computer simulations, it is shown that the adaptive limited algorithm achieves high dynamic on bandwidth allocation, maintains a good fairness on packet delay between ONUs, and keeps the fairness on the bandwidth on the demand basis.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.59 no.3
• /
• pp.83-96
• /
• 2017

This study presented a surface water quality modeling framework considering the spatial resolution of pollutant load estimation to better represent stream water quality characteristics in the Saemangeum watershed which has been focused on keeping its water resources sustainable after the Saemangeum embankment construction. The watershed delineated into 804 sub-watersheds in total based on the administrative districts, which were units for pollutant load estimation and counted as 739 in the watershed, Digital Elevation Model (DEM), and agricultural structures such as drainage canal. The established model consists of 7 Mangyung (MG) sub-models, 7 Dongjin (DJ) sub-models, and 3 Reclaimed sub-models, and the sub-models were simulated in a sequence of upstream to downstream based on its connectivity. The hydrologic calibration and validation of the model were conducted from 14 flow stations for the period of 2009 and 2013 using an automatic calibration scheme. The model performance to the hydrologic stations for calibration and validation showed that the Nash-Sutcliffe coefficient (NSE) ranged from 0.66 to 0.97, PBIAS were -31.0~16.5 %, and $R^2$ were from 0.75 to 0.98, respectively in a monthly time step and therefore, the model showed its hydrological applicability to the watershed. The water quality calibration and validation were conducted based on the 29 stations with the water quality constituents of DO, BOD, TN, and TP during the same period with the flow. The water quality model were manually calibrated, and generally showed an applicability by resulting reasonable variability and seasonality, although some exceptional simulation results were identified in some upstream stations under low-flow conditions. The spatial subdivision in the model framework were compared with previous studies to assess the consideration of administrative boundaries for watershed delineation, and this study outperformed in flow, but showed a similar level of model performance in water quality. The framework presented here can be applicable in a regional scale watershed as well as in a need of fine-resolution simulation.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.46 no.12
• /
• pp.108-116
• /
• 2009

In this paper, we propose a Ethernet based audio distribution system with a new L1/L2 hybrid switching scheme, and evaluate its performance. The proposed scheme not only offers guaranteed low latency and jitter characteristics that are essentially required for the distribution of high-quality uncompressed audio traffic, and but also provide an efficient transmission of data traffic on the Ethernet environment. The audio distribution system with a proposed scheme consists of a master node and a number of relay nodes, and all nodes are mutually connected as a daisy-chain topology through up and downlinks. The master node generates an audio frame for each cycle of 125us, and the audio frame has 24 time slotted audio channels for carrying stereo 24 channels of 16-bit PCM sampled audio. On receiving the audio frame from its upstream node via the downlink, each intermediate node inserts its audio traffic to the reserved time slot for itself, then relays again to next node through its physical layer(L1) transmission - repeating. After reaching the end node, the audio frame is loopbacked through the uplink. On repeating through the uplink, each node makes a copy of audio slot that node has to receive, then play the audio. When the audio transmission is completed, each node works as a normal L2 switch, thus data frames are switched during the remaining period. For supporting this L1/L2 hybrid switching capability, we insert a glue logic for parsing and multiplexing audio and data frames at MII(Media Independent Interlace) between the physical and data link layers. The proposed scheme can provide a good delay performance and transmission efficiency than legacy Ethernet based audio distribution systems. For verifying the feasibility of the proposed L1/L2 hybrid switching scheme, we use OMNeT++ as a simulation tool with various parameters. From the simulation results, one can find that the proposed scheme can provides outstanding characteristics in terms of both jitter characteristic for audio traffic and transmission efficiency of data traffics.