• The Journal of the Acoustical Society of Korea
• /
• v.18 no.8
• /
• pp.32-41
• /
• 1999

In this paper, an inversion method using chirp signals and two near field receivers is proposed. Inversion problems can be formulated into the probabilistic models composed of signals, a forward model and noise. Forward model to simulate chirp signals is chosen to be the source-wavelet-convolution planewave modeling method. The solution of the inversion problem is defined by a posteriori pdf. The wavelet matching technique, using weighted least-squares fitting, estimates the sediment sound-speed and thickness on which determination of the ranges for a priori uniform distribution is based. The genetic algorithm can be applied to a global optimization problem to find a maximum a posteriori solution for determined a priori search space. Here the object function is defined by an L₂norm of the difference between measured and modeled signals. The observed signals can be separated into a set of two signals reflected from the upper and lower boundaries of a sediment. The separation of signals and successive applications of the genetic algorithm optimization process reduce the search space, therefore improving the inversion results. Not only the marginal pdf but also the statistics are calculated by numerical evaluation of integrals using the samples selected during importance sampling process of the genetic algorithm. The examples applied here show that, for synthetic data with noise, it is possible to carry out an inversion for sedimentary layers using the proposed inversion method.

• Journal of the Society of Naval Architects of Korea
• /
• v.50 no.3
• /
• pp.145-152
• /
• 2013

Recently, with oil price jumping and environmental issues, Green ship is paid deep attention to by ship owner, operator, builder, class and government. Fuel efficiency and reduction of $CO_2$ emissions are expected to have a strong influence on the design and operation of merchant ships. Many ship owners and operators are seeking the more economic method by the best operating route and the application of reliable and effective energy saving devices. With the Energy Efficiency Design Index (EEDI) in 2013 attention will more than ever be focused at achieving maximum fuel economy in the hydrodynamic design of hull forms, their appendages and propellers. IMO requirements for $CO_2$ emission for ships will now be implemented for vessels ordered from 1st January 2013. So far, a lot of new idea and patents have been proposed, tested, claimed and applied for various kinds of ship type. This paper shows numerical and experimental work related to a study on a energy saving devices particularly for fuller ship such as merchant vessel of Tanker and Bulker. From the bare hull wake measurements, typical upper/lower asymmetry of hull wake at the propeller disk was found. The pre-swirl duct have been designed and reviewed to recover the loss of propeller running in that condition. The general function of the pre-swirl duct was set to work against this asymmetry of wake and generate pre-swirled flow into the propeller against the propeller rotating direction.

• Korean Journal of Environment and Ecology
• /
• v.5 no.1
• /
• pp.25-31
• /
• 1991

To investigate the structure and the conservation of Abies koreana forest at Banyabong area in Chirisan, 38 plots(100$m^2$) set up with random sampling method. Dead individuals of Abies koreana were 12.81%. were observed mainly upper-layer trees. A few seedlings of Abies koreana were observed. Three groups were classified by cluster analysis. High positive correlations was proved between Abies koreana and Rhododendron mucrolunulatum var. ciliatum, and High negative correlations was proved between Abies koreana and Fraxinus sieboliana, Carpinus cordata, Sasa purpurascens and Cornus controversa. Species diversity(H') of investigated area was calculated 1.9796-2.7509. To conserve Abies koreana forest at Banyabong area in Chirisan. Research and prescription on the declining of Abies koreana was needed and Quercus mongolica, Acer pseudo-sieboldianum, Fraxinus sieboliana, Carpinus cordata, Sasa purpurascens and Cornus controversa in the Abies koreana forest should be cleared out.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.39 no.1
• /
• pp.47-55
• /
• 2016

As one of recent issues in the information and communication industry, internet of things has attracted attention to provide intelligent infrastructure services which connect and share data and information between real and virtual world. According to the development of these internet of things technologies, types of machines, telecommunication devices, and terminals are increasing tremendously. In this situation, connectivity and interoperability between internet of things components are important issues to build a hyper connected society. To visualize this society, it is important to set up and develop information and communication technology (ICT) standards among stakeholders. However, under limited budget and human resources, it is essential to rank standardization work items for setting standards with respect to efficiency. The purpose of this study is to provide a method for setting standardization strategies within group decision making. As a multi-criteria group decision making tool, analytic hierarchy process (AHP) is adopted and applied to determine the priorities of setting work items. The proposed method first defines decision making problem with objective, criteria, and alternatives which produces a hierarchy consisting of upper and lower criteria. Then, pairwise comparisons of academy and public sector experts are performed with respect to their relative meaning and importance. Individual surveys of expert groups are collected and summarized to determine relative criteria importance measures. Furthermore, to deliver reliable importance criteria measures, differences between academy and public sector expert groups are compared and tested using Mann-Whitney non-parametric test. The results are illustrated for useful guidelines to practical group decision making in standardization strategy establishments.

• Tribology and Lubricants
• /
• v.34 no.3
• /
• pp.93-107
• /
• 2018

The purpose of Part I of this study is to find the potential region of wear scarring on engine journal bearings operating at a constant angular crank shaft velocity under firing conditions. To do this, we calculate the applied loads and eccentricities of a big-end journal bearing installed on a four-stroke and four-cylinder engine at every crank angle. Then, we find potential wear regions, such as a minimum oil film thickness, at every crank angle below most oil film thickness scarring wear (MOFTSW) obtained based on the concept of the centerline average surface roughness. Thus, the wear region is defined as a set of each film thickness below the MOFTSW at every crank angle. In this region, the wear volume changes according to the wear depth and wear angle, depending on the minimum oil film thickness at every crank angle. The total wear volume is the summation during one cycle. Graphical views of the region in the two-dimensional coordinates show the crank angle and bearing angle along the journal center path, indicating the position of the minimum oil film thickness. The results of wear analysis show that the possible wear region is located at a few tens of angles behind the upper center of a big-end bearing at maximum power rpm.

• Journal of Veterinary Clinics
• /
• v.11 no.1
• /
• pp.419-426
• /
• 1994

Acepromazine maleate(sedaject) was injected to 3 and 5 thoroughbred racehorses at 0.2mg/kg/bw, intramurculary(IM) and 0.1mg/kg/bw, intravenously(IV) respectively, and investigated the changes of clinical signs and blood pictures In before and after injection. Sedation was induced within 15 minutes after injection at the two groups and general sedation with towering of the upper eyelids and penile protrusion lasted about 7~9 hours and 9~11 hours at IV group and IM group following injection respectively. Heart beat and respiratory rates were induced within 15 minutes and then slowly returned to preinjection levels at 3 and 7 hours in the two group following injection respectively. Body temperature was decreased within IS minutes and the effect was Peaked after 30 minutes and 3 hours in IV group and IM group respectively, and then slowly returned to preinjection levels. RBC parameters, Hb and PCV were decreased about 30% at 1~5 hours and then returned to preinjection values at 13~24 hours in two groups Total WBC number were decreased slightly within 30 minutes and then returned to preinjection level at 13~24 hours in IV group but being still decreased 24 hours after dosing in IM group serum glucose level, SGOT and ALP activity were not changed significantly. Generally the set of sedation and awakening signs were faster in IV group than in IM group and RBC parameters and total WBC were depressed markedly in IM group than in IV group.

• Korean Journal of Ichthyology
• /
• v.28 no.1
• /
• pp.28-34
• /
• 2016

The anatomy and histology of the olfactory organ in Favonigobius gymnauchen was investigated using a stereo microscopy, light microscopy and scanning electron microscopy. The paired olfactory organs in the dorsal snout are set in between the upper lip and the eyes. These organs are composed of two openings (anterior nostril with a tubular structure and posterior nostril), a single olfactory cavity, two nasal sac (ethmoidal and lacrimal sacs), olfactory nerve and olfactory bulb. The distributional pattern of the sensory epithelium is a only one type (continuous type). This epithelium is made up of the receptor cell, supporting cell and basal cell. The receptor cell has a only one type (ciliated receptor cell with 3~4 cilia). The non-sensory epithelium is built of the stratified epithelial cells and has mucous openings on the surface. Such an olfactory organ in F. gymnauchen may be considered to reflect its ecological habitat as a shallow water or tidal pool in the coastal zone.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.41 no.12
• /
• pp.23-32
• /
• 2004

This research investigates the performance of the optical transmissions systems using the SSB modulation format The focus was on the spectral efficiency of the WDM systems and the transmission penalties due to the fiber nonlinearities. By investigating the performance obtained with ideal SSB signal, we set the upper limit of the performance which can be obtained by SSB technology. Furthermore, we investigated the performance obtainable with SSB signals which can be generated with realizable devices. Since SSB formats are more susceptible to the fiber nonlinearities, SSB formats exhibited inferior transmission performances compared to the DSB format. However, within the 500~1000 km transmission range, which is the focus of this research, it was found that the WDM systems with 12.5 GHz channel spacings might benefit from the SSB modulation techniques.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.13 no.2
• /
• pp.277-290
• /
• 2018

Wind data observed by wind profiler provide wind vectors with the altitudes using PCL1300, wind computation program. As a result of application with parameters set in program currently, it is difficult to compute wind vectors in the upper air over 3 km. This id because a very strict criterion for parameters removes large amounts of data. In this study, therefore, we improve the methods of application by resetting parameters to expand data collection area of wind vectors and reduce underestimation. Although the acquisition rate of the wind vector increased from 72.2% to 92.2%, the RMSE of the wind speed maintained 1.5 m/s - 3.1 m/s, which is less than 15% of the error rate at each altitude.

• The Journal of Advanced Prosthodontics
• /
• v.9 no.4
• /
• pp.252-256
• /
• 2017

PURPOSE. This in vitro study aimed to analyze and compare the reproducibility of zirconia and lithium disilicate crowns manufactured by digital workflow. MATERIALS AND METHODS. A typodont model with a prepped upper first molar was set in a phantom head, and a digital impression was obtained with a video intraoral scanner (CEREC Omnicam; Sirona GmbH), from which a single crown was designed and manufactured with CAD/CAM into a zirconia crown and lithium disilicate crown (n=12). Reproducibility of each crown was quantitatively retrieved by superimposing the digitized data of the crown in 3D inspection software, and differences were graphically mapped in color. Areas with large differences were analyzed with digital microscopy. Mean quadratic deviations (RMS) quantitatively obtained from each ceramic group were statistically analyzed with Student's t-test (${\alpha}=.05$). RESULTS. The RMS value of lithium disilicate crown was $29.2\;(4.1){\mu}m$ and $17.6\;(5.5){\mu}m$ on the outer and inner surfaces, respectively, whereas these values were $18.6\;(2.0){\mu}m$ and $20.6\;(5.1){\mu}m$ for the zirconia crown. Reproducibility of zirconia and lithium disilicate crowns had a statistically significant difference only on the outer surface (P<.001). The outer surface of lithium disilicate crown showed over-contouring on the buccal surface and under-contouring on the inner occlusal surface. The outer surface of zirconia crown showed both over- and under-contouring on the buccal surface, and the inner surface showed under-contouring in the marginal areas. CONCLUSION. Restoration manufacturing by digital workflow will enhance the reproducibility of zirconia single crowns more than that of lithium disilicate single crowns.