• Architectural research
• /
• v.13 no.4
• /
• pp.53-60
• /
• 2011

Damage detection algorithms based on a one-dimensional beam model can detect damage within a beam span caused by flexure only but cannot detect damage at a joint with prescribed boundary conditions or at the middle part of a beam section where the neutral axis is located. Considering the damage at a welded joint of beam elements in steel structures and modeling the damage with twodimensional plane elements, this study presents a new approach to detecting damage in the depth direction of the joint and beam section. Three damage scenarios at the upper, middle, and lower parts of a welded joint of a rectangular symmetric section are investigated. The damage is detected by evaluating the difference in the receptance magnitude between the undamaged and damaged states. This study also investigates the effect of measurement locations and noise on the capability of the method in detecting damage. The numerical results show the validity of the proposed method in detecting damage at the beam's welded joint.

• Journal of Advanced Marine Engineering and Technology
• /
• v.20 no.1
• /
• pp.56-66
• /
• 1996

In this study, the characteristics of generation and propagarion of transient wave induced in the assembly of four collecting plate upon the propagation of waves are analyzed. Also double exposure holographic inteferometry using ruby pulse laser is built in order to investigate the propagation of transient waves generated by impact load. When impact load was applied at edge of connecting band, the vibration of collecting plates was generated from the contact points between collecting plate and band which connects four collecting plates. Waves generated from the lower part and those reflected from the upper part were mixed as time went on and then formed very complex shapes. Also, when impact load was aplied at center of collecting plate, the waves propagating across the convexo-concave plane were reflected partly at curved section. Therefore the vibration amplitude was decreased as the transiet waves were propagated through the convexo-concave plane.

• ETRI Journal
• /
• v.30 no.6
• /
• pp.877-879
• /
• 2008

A novel differential dual-frequency antenna using proximity coupling is proposed. Dual bands are realized by a slot in the ground plane. The lower resonant frequency is controlled by the slot in the ground plane, and the upper resonant frequency is mainly determined by the dimensions of the radiating patch. Measured results show that the proposed antenna can operate at 2.51 GHz and 5.38 GHz.

• Management Science and Financial Engineering
• /
• v.10 no.1
• /
• pp.97-106
• /
• 2004

In this paper, we propose an effective cut generation method based on the Chvatal-Gomory procedure for a variable-capacity (0,l)-Knapsack problem with two general integer variables. We first derive a class of valid inequalities for the problem using Chvatal-Gomory procedure, then analyze the associated separation problem. Based on the results, we show that there exists a pseudo-polynomial time algorithm to solve the separation problem. By analyzing the theoretical strength of the inequalities which can be generated by the proposed cut generation method, we show that generated inequalties define facets under mild conditions. We also extend the result to the case in which a nontrivial upper bound is imposed on a general integer variable.

• Proceedings of the KIEE Conference
• /
• 2008.05a
• /
• pp.147-148
• /
• 2008

In this paper, we calculated the axial magnetic field at mid-gap plane between upper and lower electrode in vacuum interrupter by means of commercial finite element method Maxwell 3D and compared on the basis of "effective area" criterion. The models used in this paper are coil type(axial magnetic field) vacuum interrupter electrodes which have different numbers of coil segment. We used Dr. Schulmann's experimental equation which indicates minimum critical value of axial magnetic field to diffuse arc.

• Journal of the Korean Operations Research and Management Science Society
• /
• v.22 no.3
• /
• pp.59-80
• /
• 1997

Designing highly survivable interoffice telecommunication networks is considered. The problem is formulated as a minimum-cost network design problem with three node connectivity constraints. These valid and facet-defining inequalities for the convex hull of the solution are presented. A branch and cut algorithm is proposed based on the inequalities to obtain the optimal solution. With the lower bound by the cutting plane algorithm, a delete-ink heuristic is proposed to otain a good upper bound in the branch and bound procedure. The effeciveness of the branch and cut algorithm is demonstrated with computational results for a variety of problem sets : different lower bounds, two types of link costs and large number of links. The cutting plane procedure based on the three inequalities provides excellent lower bounds to the optimal solutions.

• Transactions of Materials Processing
• /
• v.3 no.2
• /
• pp.202-214
• /
• 1994

An upper bound elemental technique(UBET) is applied to predict the forging load and die-cavity filling for non-axisymmetric ring forging. In order to analyze the process easily, it is suggested that the finial product is divided into three different deformation regions. That is axisymmetric part in corner, lateral plane-strain part and shear deformation on boundaries between them. the place-strain and axisymmetric part are combinded by building block method. Also the total energy is computered through combination of three deformation part. Experiments have been carried out with pure plasticine billets at room temperature. The theoretical predictions of the forging load and the flow pattern are in good agreement with the experimental results.

• The Journal of the Korean dental association
• /
• v.19 no.2 s.141
• /
• pp.167-174
• /
• 1981

The purpose of this study was observing the annual growth increment in cephalogram. The cephalograms of 29 boys & 23 girls were analized by method of Downs & Steiner, range from 7 to 8 years in Korean children. the results were as follows; 1. The craniofacial complex of Korean children grew downward and fordward. 2. The pronounced linear and angular growth changes were in the upper central incisors and lower central incisors. 3. The SN Plane to Mandibular plane angle was reduced. 4. The SNA and SNB was almost constant in male.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.19 no.5
• /
• pp.1211-1219
• /
• 1995

An upper bound elemental technique (UBET) program has been developed to analyze forging load, die-cavity filling and effective strain distribution for flash and flashless forgings. The simulation for flash and flashless forgings are applied axisy mmetric and plane-strain closed-die forging with rib-web type cavity. Inverse triangular and inverse trapezoidal elements are used to analyze flashless forging. The analysis is described for merit of flashless precision forging. Experiments have been carried out with pure plasticine billets at room temperature. Theoretical predictions of the forging load and the flow pattern are in good agreement with experimental results.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1997.04a
• /
• pp.837-841
• /
• 1997

An upper bound elemental technique(UBET) program has been developed to analyze forging load, die-cavity filling and optimum kinematically admissible velocity fields for flashless forging. The simulation for flashless forgings are applied plane and axisymmetric closed-die forging with rib-web type cavity. The kinematically admissible velocity fields for inverse triangular and inverse trapezoidal elements, are used to analyze flashless forging. Experiments have been carried out with pure plasticine billets at room temperature. Theoretical predictions of the forging load in plane-strain and axisymmetric forging are in good agreement with experimental results.