• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.10
• /
• pp.756-760
• /
• 2017

Meeting the growing demand deadlines, reducing the production cost and upgrading the quality control measurements are the reasons why the automotive part manufacturers are venturing into automation. Attaining these objectives is impossible with human inspection for many reasons. Accordingly, the introduction of inspection system purposely for door hinge bracket inspection is presented in this study as an alternative for human inspection. This proposal is designed to meet the demands, features and specifications of door hinge bracket manufacturing companies in striving for increased throughput of better quality. To improve demerits of this manual operation, inspection system is introduced. As the inspection algorithm, template matching algorithm is applied to distinguish the articles of good quality and the poorly made articles. Through the verification test of the inspection process algorithm and the similarity metric matching algorithm, the detection accuracy was 98%, and it was applied to the production site to contribute to the improvement of the productivity due to the decrease of the defective product.

• Convergence Security Journal
• /
• v.15 no.6_1
• /
• pp.3-16
• /
• 2015

Ten years have passed since an arm-college joint education system with the goal of efficiently acquiring future non-commissioned officers (NCOs), and approximately 4,000 annual graduates of the programs have already actively been in position in Korean Army. We evaluated the effectiveness of the system based on an empirical survey for 100 respondents, all sergeants-first-class and above. The analysis shows that the graduates' general performance and attitude as NCOs appear to be superior to those who were recruited from the general public, while there were no statistically significant difference in some other areas. NCOs from the departments of the program showed higher capacity to conduct his duty of expertise, better accountability, and more positive attitude toward the routine tasks. Several policy messages are also drawn. We suggest that the Army and the relevant schools take appropriate measures like more active institutional support for upgrading the system. Additionally, their initial selection process for prospective NCOs, high school graduates, should also be improved.

• Journal of Fisheries and Marine Sciences Education
• /
• v.17 no.2
• /
• pp.193-208
• /
• 2005

The object of this study is to provide a framework of increasing the effectiveness of the R&D planning of experts in fisheries and the education of students with the theoretical background and analytical skills through the adoption of technology roadmapping process in the marine production industry. The study was conducted by fact-finding surveys and the response content for surveys obtained from each expert advisor in the field of fisheries and maritime affairs such as fishery industries, some government organizations and research institutes including the Ministry of Maritime Affairs and Fisheries (MOMAF), National Fisheries Research and Development Institute (NFRDI) and fisheries-related universities was analyzed. The major implementation tasks to effectively achieve the basic goals of technology roadmap for short and middle-term research and development in the fisheries production field are as follows: 1. Research in order to achieve the realization of community-based resource management fisheries or fishermen-oriented co-management fisheries with paradigm shift in fisheries management. 2. Research in order to derive the construction of cost reducing and manpower saving systems in fishery-related science, technology and engineering. 3. Research in order to create the high value-added fisheries products with a focus on the upgrading of processing, freezing and refrigerating facilities, the reduction of logistics costs and the minimization of distribution steps. 4. Research in order to achieve the realization and development of environmental-friendly fisheries and internationally competitive fisheries through restructuring the entire fishing industries, in particular, small-scale fisheries. 5. Research in order to achieve the effective utilization of fisheries resources with a new creation of clean and living marine environment by fisherman under the balanced management and protection of marine living resources and fishing grounds.

• Journal of Convergence Society for SMB
• /
• v.1 no.1
• /
• pp.29-37
• /
• 2011

As the area of informatization has been expanding followed by the development of information communication technology, cloud computing which can use infra sources like server, storage, and network in IT area as an efficient service whenever and wherever skyrockets. But users who use cloud computing technology may have some problems like exposure personal data, surveillance on person, and process on commercial purpose on their personal data. This paper proposes a security technique which protect user's privacy by creating imaginary user information not to be used by other people. The proposed technique virtualizes user's information as an anonymity value not to let other people know user's identity by combining PIN code with it and guarantees user's anonymity. Also it can manage and certificate personal information that is important in cloud computing, so that it can solve security problem of cloud computing which centers all informations. Therefore this paper can assist upgrading of the level of information of poor SMBs through safe use of cloud computing.

• International Journal of Concrete Structures and Materials
• /
• v.11 no.1
• /
• pp.171-183
• /
• 2017

Strengthening reinforced concrete (RC) beams with openings by using aramid fiber reinforcement polymers (AFRP) on the beams' surfaces offers a useful solution for upgrading concrete structures to carry heavy loads. This paper presents a repairing technique of the AFRP sheets that effectively strengthens RC beams, controls both the failure modes and the stress distribution around the beam chords and enhances the serviceability (deflection produced under working loads be sufficiently small and cracking be controlled) of pre-cracked RC beams with openings. To investigate the possible damage that was caused by the service load and to simulate the structure behavior in the site, a comprehensive experimental study was performed. Two unstrengthened control beams, four beams that were pre-cracked before the application of the AFRP sheets and one beam that was strengthened without pre-cracking were tested. Cracking was first induced, followed by repair using various orientations of AFRP sheets, and then the beams were tested to failure. This load was kept constant during the strengthening process. The results show that both the preexisting damage level and the FRP orientation have a significant effect on strengthening effectiveness and failure mode. All of the strengthened specimens exhibited higher capacities with capacity enhancements ranging from 21.8 to 66.4%, and the crack width reduced by 25.6-82.7% at failure load compared to the control beam. Finally, the authors present a comparison between the experimental results and the predictions using the ACI 440.2R-08 guidelines.

• Journal of Hydrogen and New Energy
• /
• v.27 no.6
• /
• pp.621-627
• /
• 2016

Low-priced hydrogen is required in petrochemical industry for producing low-sulfur oil, and upgrading low-grade crude oil since environmental regulations have been reinforced. Steel industry can produce hydrogen from by-product gases such as Blast Furnace Gas (BFG), Coke Oven Gas (COG), and Linze Donawitz Gas (LDG) with water gas shift (WGS) reaction by catalysis. In this study, we optimized conditions for WGS reaction with commercial catalysts by BFG and LDG. In particular, the influence on activity of gas-hourly-space-velocity, and $H_2O/CO$ ratios at different temperatures were investigated. As a result, 99.9%, and 97% CO conversion were showed with BFG, and LDG respectively under $350^{\circ}C$ High Temperature Shift (HTS), $200^{\circ}C$ Low Temperature Shift (LTS), 3.0 of $H_2O/CO$, and $1500h^{-1}$ of GHSV. Furthermore, 99.9% CO conversion lasted for 250 hours with BFG as feed gas.

• Journal of Industrial Technology
• /
• v.9
• /
• pp.29-41
• /
• 1989

A general study on the upgrading of mica minerals which are mainly found in pegmatite deposits was carried out for the purpose of developing a technique for recovering mica in form of comercial grade products. By the way the grade one of about 5~6% $K_2O$ still is not developed. The target of this research work is to be establish a process for the efficient concentration of muscovite, containing more than 10% $K_2O$. The tests are applied to incraese the recovery and grade of concentrates in term of variations of conditions. The test sample consists of mainly muscovite and gangue mineral such as quartz, pyrite and chlorite. Decantation and shaking table tests were ineffective to up-grade this low grade one, but flotation method gave satisfactory result. By means of grade one, but flotation method gave satisfactory result. By means of grindability tests, an optimum result could be obtained from the sample ground to -48mesh feed size. The flotation result indicates that the dodecyl ammonium chloride used as a cationic collector is effective on the negatively charged surface, while the sodium dodecyl sulfate as an anionic collector is effective on the positively charged surface. Muscovite was floated by petroleum sulfonate as well as amine type collector, it also floated by MIBC as well as pine oil frother under well condition. Fine muscovite concentrates of about 10.68% $K_2O$ was obtained with 22.4% yield, by decantation, the muscovite concentrates of 10.10% $K_2O$ was obtained with 23.54% yield, by table concentration, the muscovite concentrates of 11.51% $K_2O$ was obtained with 23.0% yield by flotation.

• Journal of Korean Society of Water and Wastewater
• /
• v.34 no.1
• /
• pp.75-83
• /
• 2020

This study investigated the degradation characteristics and biodegradability of phenol, refractory organic matters, by injecting MgO and CaO-known to be catalyst materials for the ozonation process-into a Dielectric Barrier Discharge (DBD) plasma. MgO and CaO were injected at 0, 0.5, 1.0, and 2 g/L, and the pH was not adjusted separately to examine the optimal injection amounts of MgO and CaO. When MgO and CaO were injected, the phenol decomposition rate was increased, and the reaction time was found to decrease by 2.1 to 2.6 times. In addition, during CaO injection, intermediate products combined with Ca²⁺ to cause precipitation, which increased the COD (chemical oxygen demand) removal rate by approximately 2.4 times. The biodegradability of plasma treated water increased with increase in the phenol decomposition rate and increased as the amount of the generated intermediate products increased. The biodegradability was the highest in the plasma reaction with MgO injection as compared to when the DBD plasma pH was adjusted. Thus, it was found that a DBD plasma can degrade non-biodegradable phenols and increase biodegradability.

• Resources Recycling
• /
• v.9 no.6
• /
• pp.45-52
• /
• 2000

Generally, the residues of EAF's dusts treated by reduction process at high temperature are disposed. If the residues can be recycled as iron sources of EAF by upgrading their iron contents, it can be expected to reduce the amounts of disposed wastes and the environmental impacts. Reduction of EAF's dusts mixed with millscale was carried out in rotary hearth furnace to upgrade iron contents of reduction residues. Dusts should be reduced rapidly to protect from reoxidation of reduced iron residue which can be reoxidized at high temperature. In our experimental conditions, optimum reduction time was about 40min. and iron contents of the residues were increased with increasing mixing ratio of millscale and upgrade to 85% at 50%wt mixing ratio. Zinc and lead contents in residues were about 3% and 0.5% respectively. The residues reduced rapidly must be recycled in EAF because heavy metal elements in the residues can be extracted easily and contaminate air and water.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.22 no.3
• /
• pp.219-237
• /
• 2020

Rapid economic development and urban population growth have been increasing the necessity for underground space exploration and utilization due to the need of upgrading and expanding the existing infrastructures. TBM has been widely used to construct underground structures with high advance rate and minimal ground disturbance. Two important design parameters, which are available thrust capacity and cutterhead torque, should be estimated for any project in addition to proper selection of TBM type. However, the conventional thrust force and torque estimation model only depends on the empirical equation, which hinders the design process of the optimal thrust hydraulic system and the appropriate hydraulic components. In this study, four thrust and torque calculation models are derived and explained. For TBM design practice, the four estimation models are compared and discussed.