• Coupled systems mechanics
• /
• v.12 no.1
• /
• pp.69-81
• /
• 2023

This paper considers a delamination analysis of a statically undetermined inhomogeneous beam structure of rectangular section with viscoelastic behavior under torsion. The beam is built in at its two ends. The beam has two longitudinal inhomogeneous layers with a delamination crack between them. A notch is made in the upper crack arm. The external torsion moment applied on the beam is a function of time. Under these conditions, the beam has one degree of indeterminacy. In order to derive the strain energy release rate, first, the static indeterminacy is resolved. Then the strain energy release rate is obtained by analyzing the balance of the energy with considering the viscoelastic behavior. The strain energy release rate is found also by analyzing the compliance of the beam for checkup. Solution of the strain energy release rate in a beam without a notch in the upper crack arm is derived too. In this case, the beam has two degrees of static indeterminacy (the torsion moment in the upper crack arm is treated as an additional internal redundant unknown). A parametric investigation of the strain energy release rate is carried-out.

• Journal of Microbiology and Biotechnology
• /
• v.30 no.3
• /
• pp.341-351
• /
• 2020

To shed light on the genetic differences among food-originated coagulase-negative Staphylococcus (CNS), we performed pan-genome analysis of five species: Staphylococcus carnosus (two strains), Staphylococcus equorum (two strains), Staphylococcus succinus (three strains), Staphylococcus xylosus (two strains), and Staphylococcus saprophyticus (one strain). The pan-genome size increases with each new strain and currently holds about 4,500 genes from 10 genomes. Specific genes were shown to be strain dependent but not species dependent. Most specific genes were of unknown function or encoded restriction-modification enzymes, transposases, or prophages. Our results indicate that unique genes have been acquired or lost by convergent evolution within individual strains.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.22 no.3
• /
• pp.483-492
• /
• 1998

An inverse analysis been applied to obtain the flow stress of the material. In this method, a ring-shaped specimen is compressed between two flat tools. This procedure employs, as the object function of inverse analysis, the balance of measured loads and reaction forces calculated by using rigid-plastic finite element method. The balance is explicit scalar function of flow stress which is a function of some unknown constants. For minimizing the balance, Newton-Raphon scheme is used. The friction factor, m, between flat tools and the specimen is determined by using friction area-divided method. The proposed method allows an accurate identification by avoiding the usual assumptions made in order to convert experimental measures into stress-strain relation. In this paper, the proposed method is numerically tested. A commercial pure aluminum was selected, as an example, to apply the method and the results are compared with stress-strain relation obtained by experiments.

• Journal of Microbiology and Biotechnology
• /
• v.30 no.7
• /
• pp.982-995
• /
• 2020

A putative multidrug efflux gene, yddA, was cloned from the Escherichia coli K-12 strain. A drug-sensitive strain of E. coli missing the main multidrug efflux pump AcrB was constructed as a host and the yddA gene was knocked out in wild-type (WT) and drug-sensitive E. coliΔacrB to study the yddA function. Sensitivity to different substrates of WT E.coli, E. coliΔyddA, E. coliΔacrB and E. coliΔacrBΔyddA strains was compared with minimal inhibitory concentration (MIC) assays and fluorescence tests. MIC assay and fluorescence test results showed that YddA protein was a multidrug efflux pump that exported multiple substrates. Three inhibitors, ortho-vanadate, carbonyl cyanide m-chlorophenylhydrazone (CCCP), and reserpine, were used in fluorescence tests. Ortho-vanadate and reserpine significantly inhibited the efflux and increased accumulation of ethidium bromide and norfloxacin, while CCCP had no significant effect on YddA-regulated efflux. The results indicated that YddA relies on energy released from ATP hydrolysis to transfer the substrates and YddA is an ABC-type multidrug exporter. Functional study of unknown ATP-binding cassette (ABC) superfamily transporters in the model organism E. coli is conducive to discovering new multidrug resistance-reversal targets and providing references for studying other ABC proteins of unknown function.

• Proceedings of the Korean Society of Plant Pathology Conference
• /
• 2003.10a
• /
• pp.72.2-73
• /
• 2003

We found a soybean (Glycine max) cultivar 561 that was strongly resistant to a virulent bacterial strain of a Pseudomonas spp. Further identification revealed that the Pseudomonas spp. was a strain of Pseudomonas aeruginosa. Furthermore we identified specific genes involved in the resistance of soybean 561 and analyzed the pattern of gene expression against the Pseudomonas infection using differential-display reverse transcription PCR (DDRT-PCR). More than 126 cDNA fragments representing mRNAs were induced within 48 hours of bacteria inoculation. Among them, 28 cDNA fragments were cloned and sequenced. Twelve differentially displayed clones with open reading frames had unknown functions. Sixteen selected cDNA clones were homologous to known genes in the other organisms. Some of the identified cDNAs were pathogenesis-related genes (PR genes) and PR-like genes. These cDNAs included a putative calmodulin-binding protein, an endo-1,3-1,4-b-D-glucanase, a b-1,3-endoglucanase, a b-1,3-exoglucanase, a phytochelatin synthetase-like gene, a thiol pretense, a cycloartenol synthase, and a putative receptor-like sorineithreonine protein kinase. Among them, we found that four genes were putative pathogenesis-related genes (PR) induced significantly by the p. aeruginosa infection. These included a calmodulin-binding protein gene, a b-1,3-endoglucanase gene, a receptor-like sorine/threonine protein kinase gene, and pS321 (unknown function). These results suggest that the differentially expressed genes may mediate the strong resistance of soybean 561 to Pseudomonas aeruoginosa.

• Proceedings of the KSME Conference
• /
• 2001.06c
• /
• pp.224-228
• /
• 2001

This paper presents the analyzing method of golf shoes and shows design technique including air-cycled pump in the midsole. The golf shoes are analyzed by using the finite element method for the optimization in design by considering the configuration of midsole and outsole, which compose the golf shoes. Also the optimum size of air-cycled pump in the midsole is examined. Standard human pressure values for boundary conditions are adoped for the finite element analysis. The unknown constants of the strain energy function of Ogden type are observed in accordance with the axial tension test. By using the commercial FEM software for nonlinear analysis, MARC V7.3, the strains and the values of volume change for midsole and outsole are obtained, respectively. As a result, it can be concluded that these values in the midsole and the outsole are different depending on the characteristic of elastomer. More precise investigation about the assembly of two parts, which represent midsole and outsole, is under studying.

• Journal of Microbiology and Biotechnology
• /
• v.29 no.3
• /
• pp.401-409
• /
• 2019

Heat-resistant microbial hosts are required for bioprocess development using high cell density cultivations at the industrial scale. We report that the thermotolerance of Escherichia coli can be enhanced by overexpressing ybeD, which was known to encode a hypothetical protein of unknown function. In the wild-type E. coli BL21(DE3), ybeD transcription level increased over five-fold when temperature was increased from $37^{\circ}C$ to either $42^{\circ}C$ or $46^{\circ}C$. To study the function of ybeD, a deletion strain and an overexpression strain were constructed. At $46^{\circ}C$, in comparison to the wild type, the ybeD-deletion reduced cell growth half-fold, and the ybeD-overexpression promoted cell growth over two-fold. The growth enhancement by ybeD-overexpression was much more pronounced at $46^{\circ}C$ than $37^{\circ}C$. The ybeD-overexpression was also effective in other E. coli strains of MG1655, W3110, DH10B, and BW25113. These findings reveal that ybeD gene plays an important role in enduring high-temperature stress, and that ybeD-overexpression can be a prospective strategy to develop thermotolerant microbial hosts.

• The Plant Pathology Journal
• /
• v.19 no.5
• /
• pp.239-247
• /
• 2003

In Korea, a local soybean (Glycine max) genotype 56l. was found to be strongly resistant to a virulent bacterial strain of a Pseudomonas sp. SN239. Specific genes involved in the resistance of the soybean genotype 561 were identified and the pattern of gene expression against the Pseudomonas infection was analyzed using differential-display reverse transcription PCR (DDRT-PCR). More than 126 cDNA fragments representing mRNAs were induced within 48 hours of bacteria inoculation. Among them, 28 cDNA fragments were cloned and sequenced. Twelve differentially displayed clones with open reading frames had unknown functions. Sixteen selected cDNA clones were homologous to known genes of other organisms. Some of the identified cDNAs were pathogenesis-related (PR) genes and PR-like genes. These cDNAs included a putative calmodulin-binding protein; an endo-l,3-1,4-$\bate$-D-glucanase; a $\bate$-1,3-endoglucanase; a $\bate$-1,3-exoglucanase; a phytochelatin synthetase-like gene; a thiol protease; a cycloartenol synthase; and a putative receptor-like serine/threonine protein kinase. Among them, four genes were found to be putative PR genes induced significantly by the Pseudomonas infection. These included a calmodulin-binding protein gene, a $\bate$-1,3-endoglucanase gene, a receptor-like serine/threonine protein kinase gene, and pS321 (unknown function). These results suggest that the differentially expressed genes may mediate the strong resistance of soybean 561 to the strain SN239 of Pseudomonas sp.

• Restorative Dentistry and Endodontics
• /
• v.22 no.2
• /
• pp.693-701
• /
• 1997

In 1992, Prevotella intermedia was shown to be comprised of another spoecies now known as Prevotella nigrescens. Strain ATCC 33563 is now designated the type strain of P. nigrescens while strain ATCC 25611 is remains the type strain of P. intermedia. The purpose of this study was to find the differences in protein profiles of P. intermedia and P. nigrescens, using sodium dodecyl sulfate polyacrylamide gel electrophoresis, which can be used for differentiation of those two species. A partial amino acid sequence of the 18.6 kDa protein band, which was specific in P. nigrescens, was also determined. The cellular proteins were extracted from the cell pellets of pure cultures of P. intermedia. and P. nigrescens by either sonication or being shaken continuously for 20 min at $21^{\circ}C$ with 1 % SDS or being boiled for 3 min with 1 % SDS. SDS-PAGE was performed according to the method of laemmli using either 12% (w/v) gels or 18% (w/v) gels. Results were as follows ; 1. The similar electrophoretic protein profiles were shown by 3 cellular protein extraction methods for each strain. (Fig. 1 and 2) 2. the 18.6 kDa band which was specific only in P. nigrescens could be used for the differentiation of P. intermedia. and P. nigrescens. (Fig. 1 and 2, Table 1) 3. A total of 4 different tryptic fragments from the 18.6 kDa protein were sequenced. the resulting amino acid sequences were fragment 1.GNPVNIGGEW, 2.FNVVR, 3.NYLT-VAPY, and 4.GGDNVTTYQVLPEIGYN. By comparison to the sequences of known proteins in the Swiss-Prot database and PIR database. 90 % matching between fragment 1 and serine hydroxymethyl transferase(P24060) in the Swiss-Prot, and 90% matching between fragment 1 and glycine hydroxymethyl transferase(S15203) in the PIR were shown, but the identity and function of the 18.6 kDa protein remains unknown.

• Advances in nano research
• /
• v.7 no.5
• /
• pp.311-324
• /
• 2019

The present study aims to evaluate the nonlinear and post-buckling behaviors of orthotropic graphene sheets exposed to end-shortening strain by implementing a semi-Galerkin technique, as a new approach. The nano-sheets are regarded to be on elastic foundations and different out-of-plane boundary conditions are considered for graphene sheets. In addition, nonlocal elasticity theory is employed to achieve the post-buckling behavior related to the nano-sheets. In the present study, first, out-of-plane deflection function is considered as the only displacement field in the proposed technique, which is hypothesized by an appropriate deflected form. Then, the exact nonlocal stress function is calculated through a complete solution of the von-Karman compatibility equation. In the next step, Galerkin's method is used to solve the unknown parameters considered in the proposed technique. In addition, three different scenarios, which are significantly different with respect to concept, are used to satisfy the natural in-plane boundary conditions and completely attain the stress function. Finally, the post-buckling behavior of thin graphene sheets are evaluated for all three different scenarios, and the impacts of boundary conditions, polymer substrate, and nonlocal parameter are examined in each scenario.