• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.13 no.5
• /
• pp.38-50
• /
• 2010

Expressways are often upgraded by widening the lanes and/or by reshaping the roads to be more linear for faster travel time. However, during the process of improving the route of the expressways, the areas where the old expressways used to be are often unused and abandoned. When these neglected sites are left alone, they often become dump sites causing pollution and impacting the surrounding environment. Therefore, it is important to restore the abandoned expressway sites to its full natural beauty. In this study, the abandoned expressway at the Soksa interchange in Pyungchang county, located in Kangwon province was studied for establishing the model of ecological restoration project. Considering the characteristics of the site, the target flora species was chosen to be Quercus species and the target fauna species as amphibians. After the target species were carefully chosen, each species' habitat requirements were studied in order to figure out the appropriate methods toward habitat restoration specifically for these species. In addition, to determine the most efficient method toward restoration of abandoned expressways, the study utilized the planting hole techniques, the crack techniques, and the colonization techniques. In terms of the spatial organization, public education program is incorporated at the main entrance area and the programs for experimenting, and developing vegetation and habitat restoration techniques are placed in the vicinity. In the master plan-to provide natural ecosystem at the site-ASCON (asphalt concrete) was removed first, then plans for restoration including species' habitat restoration were established. Furthermore, the project included plans for improving water quality polluted through non-point source considering the surrounding nearby road and farm lands. Finally, the study established a planning process that will experimentally apply to the abandoned expressway restoration method. In the future, there will be a continuous monitoring of the methods applied to verify if the restoration methods are effective. Also, new restoration techniques should be available according to a variety of abandoned expressways' characteristics.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.13 no.6
• /
• pp.13-24
• /
• 2010

Beopseongpo has been one of the most thriving ports of the Jeolla region since the Goryeo Dynasty (918-1392). During the time of King Seongjong (r. 1469-1494) of Choseon Dynasty, a navy garrison had been deployed and the port was named Beopseongjin, as recorded in the 1485 edition of Grand code for state administration (Gyeongguk daejeon). Dangsan forests and Bibo forests have been maintained by local residents since hundreds of years ago. Dangsan forests have been applied to the scale of government and public offices. The objectives of this study were to understand the characteristics of the "Wooded Fortress of Beopseongjin in Yeonggwang" as "Scenic Site No. 22", and to investigate the conservational problem of the wooded fortress of Beopseongjin and seashore. The "Wooded fortress of Beopseongjin in Yeonggwang" consists of a Dangsan forest and two Bibo forests. But, the presence of the Dangsan forest has not been well known to the public. Although the wooded fortress has been somewhat disturbed by cultural activities, the Dangsan rituals have been held until the present every January 15 by lunar calendar. On the other hand, the seashore in front of Beopseongpo plays an important role as a scenic view. It was one of the reason that the "Wooded fortress of Beopseongjin in Yeonggwang" had been designated as a national cultural property of "Scenic Sites". However, the sandbar was reclaimed in 2009 to build commercial buildings. An integrated plan should be prepared to conserve the landscape of "Wooded fortress of Beopseongjin in Yeonggwang", which requires close partnership among local residents, experts, and local government. At present, four new buildings have been built. Although we have lost the sandbar, it is indispensable to secure the visibility of Wooded Fortress of Beopseongjin at the entrance of the village.

• Korean System Dynamics Review
• /
• v.12 no.4
• /
• pp.5-34
• /
• 2011

The purpose of this paper is to evaluate the policies for reducing private tutoring expenditure in Roh Mu Hyun and Lee Myeong Bak Government using Causal Loop analysis based on the Systems Thinking perspective. The results are as follows. First, high educational achievers receive more private tutoring than lowers and children who have rich parents have better chance to take private tutoring than the others. It reflects the social characteristics which emphasize the academic ability and educational background. Second, two governments implemented educational policies to control the private tutoring expenditure as balancing loops ; strengthening public education, providing after school programs and EBS KSAT teaching and improving the entrance exam of university. Third, they overlooked the unintended feedback loops coming from 1) incongruity between causes and countermeasures of shadow education 2) wrong perception of substitutional relationship between public education and shadow education 3) side effect of the policy increasing the weight of student record 4) problems of diversifying high schools 5) dilemma of easing the burden of testing through admission officer system. The conclusion is that policies of reducing the private education expenses have failed because two governments don't consider unintended Feedback Loops in the process of making education policies. So we have to make policies based on Systems Thinking and reducing private education expenses should not be the purpose of strengthening the public education.

• Archives of design research
• /
• v.12 no.4
• /
• pp.211-220
• /
• 1999

This study purposed more effective drawing process in practical lecture with students. Researched materials were constitution to a semester of presentation technique curriculum major in industrial design for freshman course. Students exert to entrance examination of university to get a good point in practical test. There did not have creative action in minds. But, design required concept of good idea sketch and creative technique. At study process should make correction a reform to sketch skill by repeat practicing with misunderstand drawing or imitative idea sketch. According to the practical test result & response revised lecture schedule. And then, I had survey to questionnaire paper for feedback by trial result. Besides, I was study to effect use the drawing materials for example, colored pencil, marker pastel. I think important to first use to way understanding materials and basic training. Design education be driven to new creative sketch skill. Design is the creative process to which brings ideas to reality.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.6
• /
• pp.3667-3671
• /
• 2015

Through experiment that does not cause wrinkles in the forming process for the primary purpose for install PCB(Printed circuit board) the thickness variation of the material was investigated. Experimental results was showed that the forming height of the first process had Influence Material thickness variation in the second process, in the first process, the Entrance corner of the die must have round of the product height of 50%, and The height of forming should be as high as the thickness of the material than the original forming. Also as do implement the forming shape in the first process, the thickness of the material is thinned to 85%, Restriking in the second process was that The thickness of the material is thinned to 80%. Therefore, In order to implement a precise shape, Thinking that the material thinning, The die was maintain the shape of the original product, and It was obtain the effect of the compression that the punch is to be longer, as the sum of more than 20% of the material thickness in the depth of the original product.

• Journal of radiological science and technology
• /
• v.21 no.1
• /
• pp.29-34
• /
• 1998

The purpose of simple abdomen erect projection is to see the fluid level which indicates gastrointestinal ileus or free air due to perforation. we do not have to insist on low kVp technique in simple abdomen erect position as long as we can detect the fluid level and free air shadow. Therefore, the author tried to decrease patient dose by high kVp technique and to improve the image quality due to motion artifact by reduction of exposure time. [Methods] Experiment 1. * screen/film SRO1000/HRH * exposure factor : $140\;kvp{\pm}5\;kv$ with added filters, 200 mA, 0.01 sec * phantom : Acryles : 15.0 cm(equivalent to 17 cm body thickness) 17.5 cm(equivalent to 21 cm body thickness) 20.0 cm (equivalent to 25 cm body thickness) With the exposure factor for same film density($D=0.8{\pm}0.1$) and with the materials above, we tried to find out entrance skin dose and gonad dose for both male and female. Experiment 2. Burger's phantom radiography were checked to see whether there was any change of image quality according to the kVp and the added filters. Experiment 3. Using rotating meter(self made), we examined the motion artifact and the exposure time limitation. [Results and conculution] 1. Using high voltage technique of 140 kVp with added filter, Skin dose, testicle dose and ovary dose decrease to 89.3%, 47% and 71.4% respectively compare to 70 kVp technique, 2. No great changes of Burger's phantom image has detected as from 70 kVp to 140 kVp and the air hole size of Burger's phantom over 0.028 cc(Diameter 3 mm, hight 4 mm) can be distinghished. 3. 0.01 sec(1 pulse) exposure time is possible in the single phase full wave rectification that why we can quitely reduce the unsharness caused by patient's movement.

• Applied Chemistry for Engineering
• /
• v.19 no.3
• /
• pp.338-344
• /
• 2008

The improvement of energy conservation is mandatory to decrease consumption of fossil fuels and to minimize negative impacts on the environment which originates from large cooling and heating demand. The absorption heat pump technology has a large potential for energy-saving in this respect. Absorption heat pump is a means to upgrade waste heat without the addition of extra thermal energy. The higher performance of absorber is of great importance for absorption heat pump cycle. In this study, in order to improve the performance of absorber, the absorber of tangential feed of a liquid phase with spiral tube has been investigated using methanol-glycerine as a working fluid. The spiral tube and tangential feeding generate the turbulence into the liquid flow while increasing the mass and heat transfer coefficients. The simultaneous heat and mass transfer were found to take place in a liquid turbulent film in the absorber with the spiral tube during the process of gas absorption. By calculating mass and heat transfer coefficients by measurement of the concentration and the temperature of each position in the absorber, the entrance was found to be more effective in enhancing mass and heat transfer.

• Nuclear Engineering and Technology
• /
• v.53 no.8
• /
• pp.2767-2773
• /
• 2021

We used the GEANT4 Monte Carlo MC Toolkit to simulate carbon ion beams incident on water, tissue, and bone, taking into account nuclear fragmentation reactions. Upon increasing the energy of the primary beam, the position of the Bragg-Peak transfers to a location deeper inside the phantom. For different materials, the peak is located at a shallower depth along the beam direction and becomes sharper with increasing electron density NZ. Subsequently, the generated depth dose of the Bragg curve is then benchmarked with experimental data from GSI in Germany. The results exhibit a reasonable correlation with GSI experimental data with an accuracy of between 0.02 and 0.08 cm, thus establishing the basis to adopt MC in heavy-ion treatment planning. The Kolmogorov-Smirnov K-S test further ascertained from a statistical point of view that the simulation data matched the experimentally measured data very well. The two-dimensional isodose contours at the entrance were compared to those around the peak position and in the tail region beyond the peak, showing that bone produces more dose, in comparison to both water and tissue, due to secondary doses. In the water, the results show that the maximum energy deposited per fragment is mainly attributed to secondary carbon ions, followed by secondary boron and beryllium. Furthermore, the number of protons produced is the highest, thus making the maximum contribution to the total dose deposition in the tail region. Finally, the associated spectra of neutrons and photons were analyzed. The mean neutron energy value was found to be 16.29 MeV, and 1.03 MeV for the secondary gamma. However, the neutron dose was found to be negligible as compared to the total dose due to their longer range.

• 재활복지
• /
• v.18 no.4
• /
• pp.145-164
• /
• 2014

The purpose of the study is to examine the relationships of parents' satisfaction towards their children's school education and the demographic variables associated with decision-making on post high school academic completion of parents of the students with disabilities. The Korean Education Longitudinal Study data, which contained the responses of 162 parents of high school students with mild disabilities who enrolled in regular high schools, was used for the study. For data analysis, descriptive statistics, ordinal logistic regression analysis, and chi-square test were used. As a result, provision of college entrance related information/consultation, improvement of academic performance level, collaboration/ communication between the teachers and parents, and overall school education were significantly related to parents' decision-making on their children's post high school academic completion. Also, mothers' educational level showed significant difference in parents' decision-making on their children's post high school academic completion.

• Journal of Fashion Business
• /
• v.23 no.1
• /
• pp.25-36
• /
• 2019

The purpose of this study is to offer a base line data to facilitate entrance of a Korean fashion company into the Uzbekistan market by conducting a survey of the Uzbekistan students in Korea. This is done in order to gather data on their clothes wearing condition and factors affecting the purchase intention for Korean fashion products. In this study, a survey was conducted to 260 Uzbekistan students in Korea. The results of the study were as follows: 1) Uzbekistan students bought clothes mainly from road shops and the Internet. They bought a lot of pants, shirts, jackets, jumpers, and preferred to wear black, white, blue, and red color. The dissatisfactory parts were shown in order of the width of trousers, the length of the sleeve, and the shoulder. The most unsatisfying products were the pants and T-shirt. 2) They considered the aesthetics of the fashion products evaluation criteria, the human source and the internet advertisement of the fashion information source, and the customer service of the store selection criteria. These students showed very favorable attitude towards Hallyu and Korea. In addition, their preference and purchase intention for KFP were high. 3) The level of satisfaction on 'quality', 'color', and 'care' of KFP were very high, but lowest on the 'size' and 'price' of the clothes. 4) It was revealed that the attitude toward Hallyu and Korea, the satisfaction and preference of KFP, and demographics have a significant impact on the intention toward purchasing fashion products.