• Restorative Dentistry and Endodontics
• /
• v.21 no.1
• /
• pp.321-338
• /
• 1996

The purpose of this study was to evaluate the effect of moistening and air-drying of acid conditioned dentin and enamel on the marginal microleakage. In this study, Class V cavity were prepared on both buccal and lingual surface of sixty extracted human premolars with cementum margin. These specimens were randomly devided into three groups and three dentin adhesives(Scotchbond Multi-Purpose, All bond 2, Prisma Universal Bond 3) were applied to each group. The specimens in each group were subdevided into four groups (Wet/primed, Dry/primed, Wet/not primed, Dry/not primed) and the etched dentin and enamel surface were treated these four surface treatments prior to the placement of a bonding agent or adhesive. Wet/primed group was simply blot-dried with a damp facial tissue before primer placement ; Dry/primed group was air dried for 30 seconds before the placement of a primer ; Wet/not primed group and Dry/not primed group were not primed after blot dried and air dried for 30 seconds each group. The bonding agent and composite resin were applied for each group. All specimens were exposed to 500 cycle of thermal stress. Specimens were placed in a silver nitrate solution and then sectioned buccolingually through the center of the restoration. The dye penetrations of the specimens were observed with a stereo microscope. The statistical test were applied to the results using a one way analysis variance (ANOVA) and Duncan's multiple range test. The aspects of silver ion penetration into the resin/dentin interface were examined under scanning electron microscopy. The results were as follows. 1. In all groups, the enamel margin showed significantly lower leakage value than the cementum margin (p<0.05). 2. Regardless of various surface treatment and dentin adhesives, there was no significant difference at the enamel margins (p>0.05). 3. At the dentin margins, the leakage values of Dry/not primed group showed significantly higher than that of the other groups (p<0.05). The leakage values of Wet/primed group showed significantly lower than that of the other groups, but, there was no significant difference between Wet group and Dry group. 4. There was no significantly difference between the dentin adhesives regarding the surface treatments in all groups(p>0.05). 5. On the backscatterd scanning electron microscopy observation, the penetration of the silver ion occured at the bonding resin/dentin interface. In the Wet/primed group, resindentin hybrid zone and resin penetration into the dentin was observed. The resin tags were compactively formed to a thickness of $3\sim4{\mu}m$ at the upper part of dentinal tubules. In the Dry/primed group, the thickness of the hybrid zone and the diameter, depth of the resin tags diminished. In the Non-primed groups, the hybrid zone was not identified and few resin tag was observed. There was the gap formation in the resin/dentin interface.

• Progress in Superconductivity
• /
• v.13 no.1
• /
• pp.58-63
• /
• 2011

Recently, superconductor flywheel energy storage systems (SFESs) have been developed for application to a regenerative power of train, a power quality improvement, the storage of distributed power sources such as solar and wind power, and a load leveling. As the high temperature superconductor (HTS) bearings offer dynamic stability without the use of active control, accurate analysis of the HTS bearing is very important for application to SFESs. Mechanical property of a HTS bearing is the main index for evaluating the capacity of an HTS bearing and is determined by the interaction between the HTS bulks and the permanent magnet (PM) rotor. HTS bearing rotor consists of PM and iron collector and the proper dimension design of them is very important to determine a supporting characteristics. In this study, we have optimized a rotor magnet array, which depends on the limited bulk size and performed various dimension layouts for thickness of the pole pitch and iron collector. HTS bearing rotor was installed into a single axis universal test machine for a stiffness test. A hydraulic pump was used to control the amplitude and frequency of the rotor vibration. As a result, the stiffness result showed a large difference more than 30 % according to the thickness of permanent magnet and iron collector. This is closely related to the bulk stiffness controlled by flux pining area, which is limited by the total bulk dimension. Finally, the optimized HTS bearing rotor was installed into a flywheel system for a dynamic stability test. We discussed the dynamic properties of the superconductor bearing rotor and these results can be used for the optimal design of HTS bearings of the 10kWh SFESs.

• Journal of the Institute of Convergence Signal Processing
• /
• v.11 no.2
• /
• pp.177-182
• /
• 2010

The flow of a universal system-level design methodology consists of system specification, system-level hardware/software partitioning, co-design, co-verification using virtual or physical prototype, and system integration. In the developing process of a hardware component in system, the design phase has been regarded as a phase consuming lots of time and cost. However, the verification phase in which functionality of the designed component is verified has recently been considered as a much important phase. In this paper, the implementation of a verification environment which is based on SystemC infrastructure and verifies the functionality of a hardware component is described. The proposed verification system uses SystemC user-defined channel as communication interface between variables of SystemC module and registers of Verilog module. The functional verification of an UART is performed on the proposed verification system. SystemC provides class library for hardware modeling and has an advantage of being able to design a system consisting hardware and software in higher abstraction level than register transfer level. Source codes of SystemC modules are reusable with a minor adaptation on verifying functionality of another hardware component.

• Korean journal of communication and information
• /
• v.63
• /
• pp.5-25
• /
• 2013

Korean society suffers from severe divisions represented by bi-polarization and collapse of the middle class. Intensive demanding on expanding social welfare budget has emerged in accordance with such a dramatic shift. Social consensus moving toward well-financed welfare policy, however, happens to meet political opposition supported by the discourse of fiscal soundness. This paper thus pays particular attention to deciphering the discursive structure in way of understanding how discourses bring public policy into play. For this purpose, news articles about fiscal soundness collected from 8 national newspapers have been analyzed in terms of frame, attitude, perspective and world view. Research results show, first of all, that there exist persistent competition between two frames identified as 'reduced tax with fiscal discipline' and 'increased tax with welfare money.' While the 'reduced tax' frame favors in maintaining tax cut at the expense of welfare budjet, the frame of 'increased tax' supports such arguments as the flexible employment of fiscal soundness and prosperity of national community helped by widening tax revenues. Also did these frames include a number of sub-frames like welfare populism, partisan politics, trickle down effect, tax bonanza for the rich, universal welfare and market over-reactions in order to bolster its logical authority. Media's active taking a part in penetrating supportive frames in line with political stance was found as well. Taking into account both the discursive structure upheld by frames and politics materialized by the media, the authors argue that public policies should be considered more as discourse than fixed reality. Shedding additional light on understanding the interplay among public opinion, policies and media discourse is of another importance for further study.

• Fire Science and Engineering
• /
• v.33 no.4
• /
• pp.112-120
• /
• 2019

Benzene is a class 4 hazardous material according to the Act on the Safety Control of Hazardous Substances. This study qualitatively evaluated the damage size of a "toxic" accident and "pool fire" accidents based on benzene in a virtual scenario of a fire and leakage accident during unloading at a port facility. The KORA program was used as an evaluation method, which is supported as a universal program by the National Institute of Chemical Safety. The range of damage effects of a benzene-induced fire and leakage accident was predicted. In the case of toxic damage range, the accident's damage effect range for the "worst case scenario" was reduced by up to 5.11% with a decrease in the size of the leakage hole. In the case of the leakage time, the damage effect range increased to 145.12% with a 10 min leakage time compared to that of a 5 min leakage time and went up to 20 min (212.29%) with a 20 min leakage time. In the case of pool-fire-induced damage, the damage effect range by radiant heat in the "worst case scenario" was 228.8 m in radius from the center of the handling facility. In the "alternative scenario," the damage effect range by radiant heat was reduced by up to 8.26% compared to that in the "worst case scenario" since the size of the leakage hole was decreased by reducing the cross-sectional area of the pipe.

• Restorative Dentistry and Endodontics
• /
• v.13 no.2
• /
• pp.337-348
• /
• 1988

The purpose of this study was to examine the fracture strength and characteristics of teeth with MOD cavity preparation. Freshly extracted sound maxillary premolars were cleaned and stored in normal saline solution $37^{\circ}C$ for 72 hours before experiments. The roots of teeth were embedded in a self-curing resin, and the exposed crown were maintained in a vertical position by a modelling wax in a brass ring. The MOD cavities were prepared with No. 57 carbide bur under high speed to a depth of 2.0mm and a width of 2.0mm(Fig.1). All the prepared teeth specimens were divided into 7 groups according to the mode of cavity form and restorative materials (Table 1, 2): Group I, unpreapred, intact teeth as control Group II, prepared cavity without restoration Group III, prepared teeth restored with amalgam Group IV, prepared teeth restored with composite resin (P-10) Group V, prepared teeth with beveled enamel margins restored with composite resin (P-10) Group VI, prepared teeth restored with light-cured composite resin (P-30) Group VII, prepard teeth with beveled enamel margins restored with light-cured composite resin (P-30) After placement of restorations, all of the specimens were stored in water at $37^{\circ}C$ for 72 hours before testing. All of the specimens were tested on the Instron Universal Testing machine (No. 6025) in order to evaluate the strength of fracture. One metal ball 5.0mm in diameter contacting the specimens parallel to the occlusal surface was used to in this study (Fig. 1). The fracture characteristics of the specimens were examined with naked eye and in the scanning electron microscope (JSM-20). The results obtained from this study were as follows: 1. The mean fracture strength was the highest in group VI and that in group II was the lowest. 2. The progress of crack of teeth propagated into the pulp cavity. 3. In case of the group of the restored teeth, the crack occurred to be accompanied with cuspal fracture. 4. The crack of restored teeth was initiated along the pulpo-axial line angle of the cavity.

• Journal of Digital Convergence
• /
• v.18 no.3
• /
• pp.43-48
• /
• 2020

This study analyzed the level of digital informatization and the level of human relationship satisfaction in the disabled group. The digital informatization level of the disabled refers to the level of smart access, smart capability, and smart utilization. For the sampling of persons with disabilities, the survey was conducted for persons aged 7 to 69 who were registered under the Welfare for Persons with Disabilities Act. Regression analysis utilized SAS 9.3.s through vitalization of local communities, and information education for the disabled is also important. The analysis results are as follows. First, the higher the digital access level of the disabled, the higher the level of interpersonal satisfaction. Second, the higher the digital information capability level of the disabled, the higher the level of interpersonal satisfaction. Third, the higher the level of digital information utilization of the disabled, the higher the level of interpersonal satisfaction. As a result, the higher the digital information level of the disabled, the higher the satisfaction level in the interpersonal relationship of the disabled. In addition, it was found that careful attention and policy review are needed to resolve the digital information gap of the government for the disabled who are marginalized groups. Therefore, it is necessary to provide the expansion of universal services of the marginalized groups including the disabled. In addition, it is important to form a culture in which the community embraces the marginalized class through vitalization of local communities, and information education for the disabled is also important.

• Restorative Dentistry and Endodontics
• /
• v.21 no.2
• /
• pp.652-663
• /
• 1996

The purpose of this study was to evaluate the tensile bond strength to tooth structure of composite resin and glass ionomer cement according to filling methods and light curing units. In this study, two class V cavities were prepared on the buccal surface of each tooth of 140 extracted human molars, and they were randomly assigned into 3 experimental groups with 40 teeth and control group with 20 teeth. And then, each experimental groups subdivided into 2 groups(A,B) according to light curing units. The cavities of each group were filled with the CLEARFIL FII self curing resin(Control Group), Z-100 light curing resin(Group 1), Vitremer$^{TM}$ light curing glass ionomer cement(Group 2) and Z-100 light curing resin over the Vitrebond$^{TM}$ liner(Group 3). And subdivided A Group used Argon Laser(SPECTRUM$^{TM}$, U.S.A.), B Group used XL 1,000 curing light (3M, U.S.A.). The specimens underwent temperature changed from $5^{\circ}C$ to $55^{\circ}C$ five hundred times. After thermocycling, specimens were stored in 100% relative humidity at $37^{\circ}C$ for 24 hours. And then, the tensile bond strength of specimens were calculated with Universal Testing Machine(AGS-100A, Japan). The results were as follows : 1. Among the experimental groups, the group 2-B showed the highest tensile bond strength ($18.89{\pm}7.80$) and the group 1-A showed the lowest tensile bond strength ($11.68{\pm}2.28$). There was significant difference between group 2-B and group 1-A(p<0.01). 2. Between the light curing units, the XL 1,000 unit showed higher tensile bond strength ($16.63{\pm}3.20$) than that of the Argon Laser unit ($13.73{\pm}2.30$). There was significant difference between XL 1,000 and Argon Laser(p<0.01). 3. About filling methods and materials, the group 2 showed the highest tensile bond strength ($17.56{\pm}1.89$) and the group 1 showed the lowest tensile bond strength($13.03{\pm}1.90$). There was significant difference between group 2 and group 1,3(p<0.01). In conclusion, the results showed that the glass-ionomer cement that cured by XL 1,000 light curing unit demonstrated significantly higher tensile bond strength than other curing unit and filling methods.

• Journal of Korea Water Resources Association
• /
• v.55 no.3
• /
• pp.245-255
• /
• 2022

Evaluating the qualitative the qualitative process of water resources by using various indicators, as one of the most prevalent methods for optimal managing of water bodies, is necessary for having one regular plan for protection of water quality. In this study, zoning maps were developed on a yearly basis by collecting and reviewing the process, validating, and performing statistical tests on qualitative parameters҆ data of the Iranian aquifers from 1995 to 2020 using Geographic Information System (GIS), and based on Inverse Distance Weighting (IDW), Radial Basic Function (RBF), and Global Polynomial Interpolation (GPI) methods and Kriging and Co-Kriging techniques in three types including simple, ordinary, and universal. Then, minimum uncertainty and zoning error in addition to proximity for ASE and RMSE amount, was selected as the optimum model. Afterwards, the selected model was zoned by using Scholar and Wilcox. General evaluation of groundwater situation of Iran, revealed that 59.70 and 39.86% of the resources are classified into the class of unsuitable for agricultural and drinking purposes, respectively indicating the crisis of groundwater quality in Iran. Finally, for validating the extracted results, spatial changes in water quality were evaluated using the Groundwater Quality Index (GWQI), indicating high sensitivity of aquifers to small quantitative changes in water level in addition to severe shortage of groundwater reserves in Iran.

• Journal of Creative Information Culture
• /
• v.7 no.4
• /
• pp.187-196
• /
• 2021

This study was conducted as a study on the SW career education of students from underprivileged areas, which is a necessary condition for SW education to become a universal education or where research has not been conducted. Therefore, this study conducted a SW career selection model using structural equations for 2,231 students in grades 3 to 6 in 6 schools located in the marginalized areas of eup/myeon. As a result of the study, it was analyzed that the intrinsic SW learning motive of students from underprivileged areas did not affect their SW career choice, whereas the external SW learning motive was analyzed to affect their SW career choice. This is inferred that the intrinsic SW learning motive does not affect the SW career choice due to the lack of SW experience of students in underprivileged areas. The correlation between internal and external SW learning motivation was analyzed to be significant. In the future, as students from the underprivileged class have more SW education experiences, research should be conducted on how internal SW learning motives affect SW career choice and how external SW learning motives support internal SW learning motives.