• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.19 no.39
• /
• pp.89-98
• /
• 1996

This paper is concerned with cost analysis model in free -replacement policy under the periodic maintenance policy The free-replacement policy with minimal repairable item is considered as follows; in a manufacturer's view point operating unit is periodically replaced, if a failure occurs between minimal repair and periodic maintenance time, unit is remained in a failure condition. Also unit undergoes minimal repair at failures in minimal-repair interval. Then total expected cost per unit time is calculated according to maintenance period Tin a viewpoint of consumer's. The expected costs are included repair cost and usage cost: operating, fixed, minimal repair and loss cost. Numerical example is shown in which failure time of item has beta distribution.

• Pediatric Gastroenterology, Hepatology & Nutrition
• /
• v.18 no.4
• /
• pp.238-245
• /
• 2015

Purpose: The aim of this study was to evaluate bolus transit during esophageal swallow (ES) and gastroesophageal reflux (GER) events and to investigate the relationship between the characteristics of ES and GER events in a population of term and preterm newborns with symptoms of gastroesophageal reflux disease (GERD). Methods: The study population consisted of term and preterm newborns referred to combined multichannel intraluminal impedance (MII) and pH monitoring for GERD symptoms. The frequency and characteristics of ES and GER events were assessed by two independent investigators. Statistical significance was set at p<0.05. Results: Fifty-four newborns (23 preterm) were included in the analyses. Median bolus head advancing time corrected for esophageal length (BHATc) was shorter during mealtime than during the postprandial period (median, interquartile range): 0.20 (0.15-0.29) s/cm vs. 0.47 (0.39-0.64) s/cm, p<0.001. Median bolus presence time (BPT) was prolonged during mealtime: 4.71(3.49-6.27) s vs. 2.66 (1.82-3.73) s, p<0.001. Higher BHATc (p=0.03) and prolonged BPT (p<0.001) were observed in preterm newborns during the postprandial period. A significant positive correlation between BHATc and bolus clearance time was also observed (${\rho}=0.33$, p=0.016). Conclusion: The analysis of ES and GER events at the same time by MII provides useful information to better understand the physiopathology of GERD. In particular, the analysis of BHATc during the postprandial period could help clinicians identify newborns with prolonged esophageal clearance time due to impaired esophageal motility, which could allow for more accurate recommendations regarding further tests and treatment.

• Current Optics and Photonics
• /
• v.5 no.1
• /
• pp.32-39
• /
• 2021

We propose a three-dimensional (3D) streaming system based on a lamina display that can convey field information in real-time by creating floating 3D images that can satisfy the accommodation cue. The proposed system is mainly composed of three parts, namely: a 3D vision camera unit to obtain and provide RGB and depth data in real-time, a 3D image engine unit to realize the 3D volume with a fast response time by using the RGB and depth data, and an optical floating unit to bring the implemented 3D image out of the system and consequently increase the sense of presence. Furthermore, we devise the streaming method required for implementing augmented reality (AR) images by using a multilayered image, and the proposed method for implementing AR 3D video in real-time non-face-to-face communication has been experimentally verified.

• Journal of the military operations research society of Korea
• /
• v.4 no.1
• /
• pp.113-123
• /
• 1978

Consider a series system of two units, named 1 and 2, respectively. Two units are observed at the beginning of discrete time periods t=0,1,2, $cdots$ and classified as being in one of a countable number of states. Let (i, r) be a state of the system at time t, when the state of unit 1 is i and state of unit 2 is r at time t, Under some conditions, the opportunistic replacement policy that minimizes the expected total discounted cost or the average cost of maintenance is shown to be characterized by the control limits $i^{*}(r)$ (a function of r) and $r^{*}(i)$ (a function of i) : (a) in observed state (i, r), the optimal policy for unit 1 is to replace if $i{\ge}i^{*}(r)$ and no action otherwise; (b) in observed state (i, r), the optimal policy for unit 2 is to replace if $r{\ge}r^{*}(i)$ and no action otherwise. In addition, this paper also develops optimal policy in the finite time horizon case, where time horizon is fixed or a finite integer valued r.v. with known pmf.

• IEIE Transactions on Smart Processing and Computing
• /
• v.4 no.2
• /
• pp.65-70
• /
• 2015

In this paper, we describe the world's first real-time ray-tracing chip architecture. Ray-tracing technology generates high-quality 3D graphics images better than current rasterization technology by providing four essential light effects: shadow, reflection, refraction and transmission. The real-time ray-tracing chip named RayChip includes a real-time ray-tracing graphics processing unit and an accelerating tree-building unit. An ARM Ltd. central processing unit (CPU) and other peripherals are also included to support all processes of 3D graphics applications. Using the accelerating tree-building unit named RayTree to minimize the CPU load, the chip uses a low-end CPU and decreases both silicon area and power consumption. The evaluation results with RayChip show appropriate performance to support real-time ray tracing in high-definition (HD) resolution, while the rendered images are scaled to full HD resolution. The chip also integrates the Linux operating system and the familiar OpenGL for Embedded Systems application programming interface for easy application development.

• Water Engineering Research
• /
• v.1 no.4
• /
• pp.279-291
• /
• 2000

A mathematical model using dynamic programming approach is applied to an optimal unit commitment problem. In this study, the units are treated as stages instead of as state dimension, and the time dimension corresponds to the state dimension instead of stages. A considerable amount of computer time is saved as compared to the normal approach if there are many units in the basin. A case study on the Lower Colorado River Basin System is presented to demonstrate the capabilities of the optimal scheduling of hydropower units.

• Archives of Plastic Surgery
• /
• v.32 no.6
• /
• pp.757-759
• /
• 2005

Acquired defects involving exposed bone on the forehead is challenging to reconstruct. Skin expansion provides an ideal thin flap for forehead aesthetic unit, but it takes long time and high cost, and many patients are dissatisfied at their figures. Free flap can provide enough tissue immediately, but it takes long time and has the risk of mismatches of color and texture. This report details our experiences with two patients who had soft tissue defect on their forehead that was covered with remnant forehead flap unit. This method uses one-unit-forehead island flap based on supratrochlear and supraorbital vessel. We obtained satisfactory results in terms of aesthetic and functional consideration.

• Journal of the Korean Institute of Telematics and Electronics T
• /
• v.36T no.1
• /
• pp.51-57
• /
• 1999

This thesis is written about the Wired Logic Type Unit in developing equipment that the load is driven, that the interface unit connect with 1 Scan time to PO30 of operated PLC output contact with that a sensing signal of Temperature Sensor RSD Pt $100\Omega$ let generate the relay output of temperature controller and input the PLC. The PLC Test Kit in country that the PLC to be programmed at the PLC education place is able to drive the load, is done to do a education of PLC on status that interface process between PLC and load are disregarded. As Developing Kit for supplement this point, when the relay output of temperature controller to use Pt 100 of temperature sensor as mentioned on the former among every kinds of sensor feed back to the input of the PLC, as the equipment to act with real time system that the output contact of PLC operated to insert the WLTIJ among PC, PLC and the load, it can understand and see very easy the main principle of PLC use. The structure of WLTU to be a interface unit of load separated as to the point of contact and noncontact, sensor, indicating lamp and A contact and B contact that is belong to driving part, and a motor is belong to loading part.

• Water for future
• /
• v.19 no.2
• /
• pp.157-166
• /
• 1986

The objective of this study was to determine the best representative synthetic unit hydrograph that is applicable to ungaged small watershed. A typical unit hydrograph was established with the actual data from a small watershed. Four currently well-known methods for analyzing ungaged small watershed, including Snyder's, Clark's S.C.S. and Nash methods, were evaluated with the data from the same small watershed. The following observations were noted from the analysis of four methods. The Snyder's method yielded the similar peak discharge value as the typical unit hydrograph. With co-ordinates of three discharge values, i.e. 25%, 50% and 75% of peak discharge, were not adequate for deriving a typical unit hydrograph in ungaged small watershed. With Clark's method there shall be some way of obtaining the exact base length of time area diagram and isochrone of each reach of the stream. With Nash method peak discharge and base flow time are affected by the storage constant and gamma function argument; therefore, for deriving a more reliable and workable unit hydrograph one needs to select for the better estimation of storage constant and gamma function argument. In S.C.S. method peak discharge is directly related to the watershed area and inversely related to the time of peak diacharge. Therefore area with faster peak discharge yielded the higer peak discharge value. Although the peak discharge value obtained frome the S.C.S. method higher than the value obtained from the unit hydrograph developed from the actual data, this method contains a number of advantageous factors. The peak discharge value and the time of peak discharge can be claculated easity from the morphological characteristics of the watershed, and in S.C.S method co-ordinates of the unit hydrograph can be calculated easily from that of the dimensionless unit hydrograph. When the four currently used methods were evaluated with a typical unit hydrograph obtained from the actual data, the S.C.S method was show to be the best method in deriving a synthetic unit hydrograph for ungaged small watershed.

• International Journal of Reliability and Applications
• /
• v.3 no.4
• /
• pp.165-171
• /
• 2002

An optimization of the M/M/1 queue with impatient customers is studied. The impatient customer does not enter the system if his or her virtual waiting time exceeds the threshold K ＞ 0. After assigning three costs to the system, a cost proportional to the virtual waiting time, a penalty to each impatient customer, and also a penalty to each unit of the idle period of the server, we show that there exists a threshold K which minimizes the long-run average cost per unit time.