• Journal of Korea Water Resources Association
• /
• v.43 no.7
• /
• pp.635-643
• /
• 2010

A representative unit hydrograph responding to a small basin is used to calculate the flood discharge in the basin. The peak discharge and the time to peak of the unit hydrograph are dealt with its characteristic values. In this study it is shown and analyzed the fluctuations at peak discharges and times to peak of unit hydrographs by rainfall storms in a small national basin $8.5\;km^2$ wide are no small. And on assumption that a major factor in the fluctuations of the unit hydrographs in a small basin be rainfall intensity of a rainstorm, both relations of peak discharge and time to peak with rainfall intensity are suggested as exponential functions respectively. In this result although it is a limit of the study in which its result is accompanied with not small dispersion in the peak values of unit hydrograph due to a defect in used data it is sure an averaging regression relation between peak discharge and time to peak with rainfall intensity as identified in this study has hydrological worth from the complementary viewpoint of the theory of unit hydrograph.

• Communications for Statistical Applications and Methods
• /
• v.15 no.4
• /
• pp.531-542
• /
• 2008

The unit root test is the major tool for determining whether we use differencing or detrending to eliminate the trend from time series data. Dickey-Fuller test (Dickey and Fuller, 1979) has the low power of test when the sample size is small or the true coefficient of AR(1) process is almost unit root and the Bayesian unit root test has complicated testing procedure. We propose a new unit root testing procedure, which mixed Bayesian approach with the traditional testing procedure. Using simulation studies, our approach showed locally higher powers than Dickey-Fuller test when the sample size is small or the time series has almost unit root and simpler procedure than Bayesian unit root test procedure. Proposed testing procedure can be applied to the time series data that are not observed as process with unit root.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.13 no.5
• /
• pp.376-382
• /
• 2008

In this paper, scanning backlight unit which can reduce motion blur was designed and fabricated using flat fluorescent lamp. The FFL(flat fluorescent lamp) is in the limelight as a new illuminant of next generation BLU(backlight unit), because of simple assembly and reduction of driving components. In order to control lamp brightness, lamp on-time was controlled. In this experiment, it was confirmed that lamp brightness can be dimmed linealy and in a wide range.

• Journal of Korean Society for Quality Management
• /
• v.17 no.1
• /
• pp.1-10
• /
• 1989

In general, the characteristics of components which consist of multi-component system can not be the same. This paper proposes a maintenance model of multi-component system considering the characteristics of each component. In this paper, multi-component system is divided into three components-critical unit, major unit and minor unit, respectively. This paper determines the optimal replacement time of the system which minimizes total maintenance cost, optimal replacement period of major unit and initial stock quantity of minor unit within this optimal replacement time. Numerical examples are shown when the failure times of each unit have gamma distribution.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.17 no.4
• /
• pp.81-86
• /
• 2003

Using DG for peak-shaving unit could reduce the overall system operating cost, and using DG for standby power unit could improve the reliability of the distribution system The models of peak-shaving unit and standby power unit are different from each other. The Monte-Carlo simulation is suitable for the purpose of the analysis of two DG models. In this paper, the reliability indices are calculated from the time-sequential method, and the merit and defect of the peak-shaving unit and standby power unit are investigated.

• Journal of Institute of Control, Robotics and Systems
• /
• v.3 no.6
• /
• pp.626-631
• /
• 1997

This paper represents the design of a real-time image preprocessing system. The preprocessing system performs hardware-wise mask operations and thresholding operations at the speed of camera output single rate. The preprocessing system consists of the preprocessing board and the main processing board. The preprocessing board includes preprocessing unit that includes a $5\times5$ mask processor and LUT, and can perform mask and threshold operations in real-time. To achieve high-resolution image input data($20485\timesn$), the preprocessing board has a linescan camera interface. The main processing board includes the image processor unit and main processor unit. The image processor unit is equipped with TI's TMS320C32 DSP and can perform image processing algorithms at high speed. The main processor unit controls the operation of total system. The proposed system is faster than the conventional CPU based system.

• Proceedings of the Korean Reliability Society Conference
• /
• 2005.06a
• /
• pp.115-120
• /
• 2005

This paper introduces models for preventive maintenance policies and considers periodic preventive maintenance policy with minimal repair when the failure of system occurs. It is assumed that minimal repairs do not change the failure rate of the system. The failure rate under prevention maintenance received an effect by a previously prevention maintenance and the slope of failure rate increases the model where it considered. Also the start point of failure rate under prevention maintenance considers the degradation of system and that it increases quotient, it assumed. Per unit time it bought an expectation cost from under this prevention maintenance policy. We obtain the optimal period time and the number for the periodic preventive maintenance by using Nakagawa's Algorithm, which minimizes the expected cost rate per unit time. Finally, it suppose that the failure time of a system has a Weibull distribution as an example and we obtain an expected cost rate per unit time the optimal period time and the number when cost of replacement and cost of minimal repair change.

• The Journal of the Convergence on Culture Technology
• /
• v.8 no.6
• /
• pp.647-653
• /
• 2022

Data mining is a technique that explores knowledge such as relationships and patterns between data by exploring and analyzing data. Data that occurs in the real world includes a temporal attribute. Temporal data mining research to find useful knowledge from data with temporal properties can be effectively utilized for predictive judgment that can predict the future. In this paper, we propose an algorithm using time-unit grouping to classify the database into regular time period units and discover frequent pattern itemsets in time units. The proposed algorithm organizes the transaction and items included in the time unit into a matrix, and discovers frequent items in the time unit through grouping. In the experimental results for the performance evaluation, it was found that the execution time was 1.2 times that of the existing algorithm, but more than twice the frequent pattern itemsets were discovered.

• Journal of Korean Elementary Science Education
• /
• v.23 no.2
• /
• pp.123-130
• /
• 2004

This study is aimed at exploring the effects on Science Inquiry Ability, Scientific Attitude and Science Achievement of the Elementary School Students according to the Input time of Web-Based Instruction Programs. As the object of the study, seventy-two students were selected from three classes in the fifth grade of Y Elementary School located in the city of T, Gyungsangnam-do. They were classified into the three groups such as Group A (Class 1), Group B (Class 2) and Group C (Class 3). The author threw web-based instruction programs into the begining of a unit, during a unit, the end of a unit to each group, and explored the effects. The results of this study were as follows: First, for the learning effect of science inquiry ability, it was indicated that there was the highest effect in the case of throwing web-based instruction programs into during a unit, but the effect reduced a little in the case of throwing them into the end of a unit. Secondly, the scientific attitudes tended to be reduced in the case of throwing them into during a unit, but there did not occur statistically significant improvement. Thirdly, the degree of improvement of the science achievement tended to be highest in the case of throwing them into the end of a unit. Such findings indicated that the time of throwing in web-based instruction programs affected science inquiry ability, scientific attitude and science achievement of elementary school students. Thus, it will be said that teachers need to teach their students with the class strategies of considering various scientific elements revealed at the time of throwing in web-based instruction programs.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2003.06a
• /
• pp.1046-1050
• /
• 2003

In this paper, we describe study on the development or multi-path ultrasonic gas flowmeter using a transit time method. This system includes 5 pairs of ultrasonic transducers. ultrasonic signal processing unit using switch matrix method, computation algorithm of gas flow rate, spool piece type multi-path pipe unit. We have developed enhanced type of main ultrasonic signal processing unit using switch matrix method fer multi-path ultrasonic gas flowmeter. Also, we have developed the new transmitting ＆ receiving method of ultrasonic waves and the new signal processing algorithm for the computation of ultrasonic transit time from received ultrasonic waves. In this study, we have designed more compact signal processing unit compared with the conventional hardware system of multi-path ultrasonic gas flowmeter. We have confirmed its reliability for multi-path ultrasonic gas flowmeter through the laboratory test using calibration system. In the future. we will perform the field test for the developed system in the POSCO gas line.